Consult the complete sheet with in-depth details, compare prices and identify the features of DeWalt Trend Snappy 4 Piece Drill Countersink and Plug Cutter Set, available at the cost of 59.9 GBP; it classifies in the Power Tools category; the seller is Mytoolshed.co.uk and the manufacturer is DEWALT.
This set incorporates two drill countersinks and matching plug cutters. Plugs cutters are made from Tool Steel and are very slightly tapered. Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using the plug cutter. Recommended that plug cutters are used in a pillar drill. Specifications • Shank Diameter: 1/4 hex • Type or Grade: For No.8 & 10 • Pack Qty: 4 piece Contents: 1 x Drill/countersink for No. 8 x 9.5mm 1 x Drill/Countersink for No. 10 x 12.7mm 1 x Plug cutter 9.5mm (3/8 inch) 1 x Plug cutter 12.7mm (1/2 inch) Contents • No.8 drill/countersink • No.10 drill/countersink • Plug cutters (x2) • Hexagon key
Trend Snappy Flip Over Driver Set - 4 Piece Set For tasks involving multiple piloted countersink and screwing work, the Trend Snappy Flip Bits are des...
Trend Snappy Flip Over Driver Set - 4 Piece Set For tasks involving multiple piloted countersink and screwing work, the Trend Snappy Flip Bits are des...
Four piece set of drill bit guides for accurate drilling of pilot holes Drill bit guides for Nos. 6, 8 & 10 screws Easily dismantled for cleaning Supp...
This six piece cutter set contains a range of Tungsten Carbide Tipped cutters for decorative woodworking. Features For softwood, hardwood, chipboard, ...
This twelve piece cutter set contains a range of the most widely used router cutters for decorative woodworking, providing excellent value for mo...
SS8TC-1-4in-TCT-Router-Bit-Starter-Set-12-Piece-Trend-SET-SS8X1-4TC-p-Trend-12-Piece-Router-Bit-Starter-Set-contains-a-range-of-the-most-widely-used-c...
Heat treated tool steel countersinks with a HSS drill. Adjustable for different length screws and can produce a 9.5mm (3/8 inch) diameter or 12.7 mm...
This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. Excellent value for money. Supplied in p...
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this sev...
Trend Snappy TCT Countersink Set - 5 piece set A 5 piece set for all your countersinking and piloting needs covering Imperial screw gauges from No4 t...
This fifty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For ...
General description This fifty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters suitable for various applications, includi...
Trend Snappy HSS Metric Drill Bit Set - 7 Piece Set 7 Piece High Speed Steel Drill Bit Set in Metric diameters for all pilot and clearance hole appli...
Trend Snappy HSS Imperial Drill Bit Set - 7 Piece Set 7 Piece High Speed Steel Drill Bit Set in Imperial diameters for all pilot and clearance hole a...
Trend Snappy Drill Set - 7 Piece 7 Piece twist drill set with quick change Trend Snappy Shanks, perfect for use on metal, wood and plastics. Low cos...
Set comprising a Quick Chuck and three sizes of Drill Bit Guides for the accurate fitting of hinges. Drill bit guides for No.6, No.8 and No.10 screws...
Trend Snappy Drill Bit Guide Set - for No6, 8 & 10 Gauge Screws The essential drill bit guide set for all common countersink sizes from N06 to No10 g...
Tungsten Carbide Tipped masonry drill bit set with colour depth bands to suit wall plugs. Colour bands on drills allow easy selection of wall plug a...
Trend Snappy Robertson Driver Bits - No1, 2 and 3 sizes Set of three driver bits with Square Drive (Robertson) profiles. Covers all three head sizes...
Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill "9.5mm diameter countersink with 4mm clearance drill. The perfect, fast swap ac...
Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials...
TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. D: 3 mm Shank Diameter: 1/4 inch hex...
An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications • Sh...
Trend Snappy Standard Plug Cutter - 12.7mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Fast cutting four prong desi...
An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Specifications • Sh...
Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable short series HSS drill and non marring depth stop. This...
Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable short series HSS drill and non marring depth stop. This...
Trend Snappy Drill Bit Guide - for No12 Gauge Screws The perfect accessory for making centralised pilot holes when fitting countersunk hinges and oth...
Trend Snappy 4mm x 9.5mm TCT Counterbore - to recess screws for plugging "9.5mm diameter TCT counterbore to drill precision recess to hide screws bel...
Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide screws...
Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications • Shank Diameter: 1/4 inch ...
Trend Snappy Drill Set - 16 piece Hex shank drill bit set in fabric storage wallet for fast, accurate drilling in wood, plastics and metals. Eight H...
Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Supplied with a Trend Snappy pencil. Tool holders have a belt st...
Trend Snappy Quick Change Tool Set - 60 Piece Supplied with the Trend Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased pro...
22 piece Trend Snappy kitchen fitting set in heavy duty fabric tool holder. 19mm flat bit for mortise locks and 25mm for tubular latches. Hex drills 2...
Trend Snappy Square Drive Adapter - 1/4inch The perfect accessory for use with socket sets when driving or removing nuts and bolts. Allows any 1/4in...
High quality forged and ground Carbon Steel short Forstner bit for drilling accurate holes. For use with the Trend Snappy Quick Chuck. Clean, precis...
Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for Imperial gauge screws. The...
A pack of 25mm slotted bits. High grade chrome-vaadium steel, through hardened. For all types of screw applications in trade and industry. Specific...
Shopping online is a winning strategy, allowing effective price comparison that leads to the discovery of the best products on the market; the wide choice of items available online offers unique opportunities to find exactly what you're looking for, without unnecessary distractions or endless queues.
This site participates in the Amazon EU Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk
We are a price comparison service. We do not sell products directly. Prices and availability are provided by partner merchants and may change.
Hdds Vision srl - Via Vittorio Veneto, 25 - 33100 Udine - VAT IT02706380306
