Review Park tool pizza cutter

Park Tool 758.2 - Cutter And Reamer 1.5 Inch Headsets For Htr1 & Htr1b 341.99 GBP The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch 49.57mm diameter reamer/2.441-inch 62mm facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life

SEE OFFER

Chain wear measurement tool Park Tool Argenté One size Unisex 40.88 GBP Chain CheckerA worn bike chain leads to poor shifting performance and can even wear out transmission components, causing more costly problems.The CC-4.2 chain checker from Park Tool is a built-in gauge that measures chain wear.The CC-4.2, laser-cut, accurately measures a long section of chain and strategically contacts at three points, allowing for quick and easy determination of when it needs replacement.The tool works on all chains from 5 to 13 speeds (including SRAM® T-Type chains, SRAM® Flattop™, Shimano® XTR® 12-speed and Campagnolo® Ekar™ 13-speed) or single-speed chains, and is designed to accurately indicate when a chain reaches 0.5%, 0.75%, and 1.0% wear, the points at which most chain manufacturers suggest replacing it.When to replace the chain?Single-speed chains: replace the chain at or just before 1.0%5 to 10-speed chains: replace the chain at or just before 0.75%11 to 13-speed chains: replace the chain at or just before 0.5%Many transmission manufacturers have s...

SEE OFFER

Evolution Power Tools - Evolution 009-0002X R230DCT 230mm Disc Cutter 1600W 110V EVLR230DCTNL 134.12 GBP Evolution R230DCT 230mm Disc Cutter 110V Version. The Evolution R230DCT 230mm Disc Cutter has up to 50% more cutting depth than a 230mm (9in) grinder. When equipped with a 230mm diamond blade (NOT supplied), you get an impressive 90mm cutting depth making it the ideal cut off saw for concrete, reinforced concrete, natural stone, brick, roof tile and more. A powerful motor enables effortless cutting. It utilises Evolution Power Protect technology which protects internal components from dust and water ingress. It’s easy to use thanks to its ergonomic design, with a wrap-around front handle and even weight distribution for total control and good posture while cutting. The wheeled skid-plate takes the strain out of long, low level cutting and also allows you to put the machine down while the blade is still spinning. A blade brake and large blade guard provide improved safety. There is also an integrated dust port for easy vacuum attachment and a multi-tool, with onboard storage, for easy

SEE OFFER

EVOLUTION POWER TOOLS Evolution R230DCT 230mm Disc Cutter 2000W 240V EVLR230DCTN 134.12 GBP Evolution R230DCT 230mm Disc Cutter 240V Version. The Evolution R230DCT 230mm Disc Cutter has up to 50% more cutting depth than a 230mm (9in) grinder. When equipped with a 230mm diamond blade (NOT supplied), you get an impressive 90mm cutting depth making it the ideal cut off saw for concrete, reinforced concrete, natural stone, brick, roof tile and more. A powerful motor enables effortless cutting. It utilises Evolution Power Protect technology which protects internal components from dust and water ingress. It’s easy to use thanks to its ergonomic design, with a wrap-around front handle and even weight distribution for total control and good posture while cutting. The wheeled skid-plate takes the strain out of long, low level cutting and also allows you to put the machine down while the blade is still spinning. A blade brake and large blade guard provide improved safety. There is also an integrated dust port for easy vacuum attachment and a multi-tool, with onboard storage, for easy

SEE OFFER

Masterclass 10pc Kitchen Tool Set with 2x Spoons,Turner, Ladle, Masher, Ice Cream Scoop, Pizza Cutter, Garlic Press, Can Opener & Peeler Blue Large 91.98 GBP Includes Cooking Spoon, Slotted Spoon, Slotted Turner, Ladle, Masher, Ice Cream Scoop, Pizza Cutter, Garlic Press, Can Opener and Y Shaped Peeler. UNIQUE HANDLES: feature wide, soft-touch handles with a thumb grip for total comfort PERFORMANCE ASSURED: made of high-quality heat and odour-resistant nylon, which won't discolour NON-STICK SAFE: use on any cooking surface, including those with non-stick coatings MASTERCLASS QUALITY: dishwasher safe. Includes a five year guarantee

SEE OFFER

Park Tool CWP7C - Crank Wrench and Puller 19.49 GBP The Park Tool CWP7C Crank Wrench and Puller includes two rotating tips (11.3mm and 16.3mm) and built in wrench flats allowing the tool to remove cranks using a square taper, Octalink, ISIS Drive, Power Drive or Power Spline bottom bracket interface.

SEE OFFER

Park Tool CWP-7 Universal Crank Puller - Size: one size - male 21.98 GBP The Park CWP-7 Crank Wrench Puller is the perfect addition to any workshop. The CWP-7 is a compact crank puller workshop toolwith a built-in 8mm hex for removing crank bolts. Includes two rotating tips (11.3 mm and 16.3 mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as well as square-holed crank arms. A must have multi-fit crank puller for the home mechanic. Park ToolCWP-7 Crank Wrench Puller Features Weight - 0.5 lbs Built-in 8mm hex for efficient removal of crank bolts Two rotating tips (11.3mm and 16.3mm) and a multi-fit function for removal of several crank arms

SEE OFFER

Park Tool PCS10.3 Deluxe Home Mechanic Repair Stand Blue - Size: one size - unisex 369.99 GBP A workstand is the backbone of any workshop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.3 Deluxe Home Mechanic Repair Stand was designed and built using our 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.3 also folds easily for transport or storage.KEY FEATURESThe stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion.The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 80 lbs. (36 kg)Height adjustable from 39" to 57" (990 mm–1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 16 lbs. (7.2 kg)*NOTE:The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.

SEE OFFER

Park Tool PCS-9.3 Home Mechanic Repair Stand 179.99 GBP The Park Tool PCS-9.3 is a basic folding bicycle work stand designed and built for the home mechanic and provides a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Fully adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsDurable textured powder coat finishMaximum weight capacity: 80 lbs. (36 kg)Height adjustable from 39" to 57" (990 mm 1450 mm)Base when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 44" x 14.5" (1140 mm x 370 mm)Weight: 16 lbs. (7.2 kg)#2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray*NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is cantered below the clamp and between the legs. Please Note: Handlebar Holder is NOT included.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop.

SEE OFFER

Park Tool PCS-9.3 Home Mechanic Repair Stand Blue - Size: one size - unisex 284.99 GBP The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repairIt features 18" (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standingThe stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependabilityThe PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motionThe PCS-9.3 is the perfect way to upgrade your home shop !The new PCS-9.3 features:Fully adjustable clamp fits 7/8" to 3" (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70mm) fit into tight areas or on short seat postsDurable textured powder coat finishMaximum weight capacity: 80lbs. (36kg)Height adjustable from 39" to 57" (990mm - 1450mm)Base when open forms a triangle of 36" x 36" x 48" (920mm x 920mm x 1210mm)Folds down to 44" x 14.5" (1140mm x 370mm)Weight: 16lbs. (7.2kg)QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work TrayNote :The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs

SEE OFFER

Park Tool 690-xl - Cutter Low-profile Headsets For Htr1 152.99 GBP Facing improves the alignment of bearings in the headsetThe 690-XL has an approximate diameter of 58 mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsetsMust be used with the 768 pilot to ensure the frame is reamed and faced accurately

SEE OFFER

Park Tool Cwp7c - Crank Wrench & Puller 18.18 GBP The CWP-6 is a compact crank puller with a built-in 8mm hex for removing crank boltsIncludes two rotating tips 11.3 mm and 16.3 mm so it can be used to remove splined Octalink and ISIS Drive crank arms as well as square-holed crank armsA must have multi-fit crank puller for the home mechanic

SEE OFFER

Park Tool PCS-10.3 Deluxe Home Mechanic Repair Stand 179 GBP Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.

SEE OFFER

Park Tool Pcs-10.3 Deluxe Home Mechanic Repair Stand 174.99 GBP A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' 460mm of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. 36kg which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder both sold separately so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' 22mm - 76mm diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws 2.7'/70mm fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder both sold separately Maximum weight capacity*: 80lbs. 36kg Height adjustable from 39' to 57' 990mm - 1450mm using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' 920mm x 920mm x 1210mm Folds down to 45' x 14.5' 1140mm x 370mm Weight: 16lbs. 7.2kg Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs

SEE OFFER

Park Tool CWP-7 Crank Wrench/Puller 17.94 GBP The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank boltsIncludes two rotating tips (11.3 mm and 16.3 mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as well as square-holed crank armsA must have multi-fit crank puller for the home mechanic

SEE OFFER

Park Tool Pcs 9.3 Folding Repair Stand Blue / Black One Size unisex 219.98 GBP The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic — a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18´´ (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.The stand´s all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop.Specifications:- Fully adjustable clamp fits 7/8´´ to 3´´ (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts- Narrow clamping jaws (2.7´´/70 mm) fit into tight areas or on short seat posts- Durable textured powder coat finish- Maximum weight capacity: 80 lbs. (36 kg)- Height adjustable from 39´´ to 57´´ (990 mm–1450 mm)- Base when open forms a triangle of 36´´ x 36´´ x 48´´ (920 mm x 920 mm x 1210 mm)- Folds down to 44´´ x 14.5´´ (1140 mm x 370 mm)- Weight: 16 lbs. (7.2 kg)

SEE OFFER

Crank puller Park Tool 7C Noir One size Unisex 40.01 GBP Small pivoting pin:Suitable for cranks with threading M22 x 1.0Compatible with systems that use a threaded crank bolt M8 x 1.0, including:Square coneSRAM® PowerSpline®BNI cranks for Bosch® electric bike systemsLarge pivoting pin:Suitable for cranks with threading M22 x 1.0Compatible with systems that use a threaded crank bolt M12 x 1.0 or M15 x 1.0, including:Shimano® Octalink®ISIS driveISIS Overdrive systems

SEE OFFER

CK Tools CK T3963 Cable Cutter 210mm 29.72 GBP The CK T3963 Cable Cutter 210mm is the ultimate tool for precise and efficient cable cutting and wire stripping.The CK T3963 Cable Cutter is the ultimate tool for precise and efficient cable cutting and wire stripping.Made from special alloy steel these CK cable cutters feature razor sharp induction hardened cutting edges that guarantee exceptional performance.The shearing action ensures clean and smooth cuts ensuring professional looking results on every cut.The CK T3963 cable cutter boasts a combination of materials including carbon aluminium plastic and carbon steel.Its handle is sheathed with a robust combination of aluminium steel and plastic ensuring a comfortable and secure grip during use.Designed with a specialised profile blade the CK T3963 cable cutter is optimised for effective cable cutting and wire stripping of copper & aluminium wire only making it a versatile addition to your toolkit.With a cutting capacity of 11mm in diameter it can handle various copper and aluminium wires with ease.If you're looking for a reliable high-performance cable cutter that delivers precision and efficiency the CK T3963 Cable Cutter 210mm is the perfect choice.FeaturesSpecial alloy steel constructionRazor sharp induction hardened cutting edgesShearing action for clean cutsSuitable for copper & aluminium wire11mm Capacity

SEE OFFER

CK Tools T3963 Cable Cutters 210mm 26.44 GBP C.K Cable Cutters - CK Tools T3963, These cable cutters from CK are made from drop forged high alloy steel and have razor-sharp induction hardened cutting edges offering efficient long term cutting performance.The specially profiled blades are designed for stripping and cutting a wide range of cables including aluminium, copper and plastic sheathed up to 11mm diameter. CK Tools T3963 Cable Cutters 210mm

SEE OFFER

Park Tool Big Wheel Pizza Tool - Size: one size - male 26.99 GBP The Park Tool Big Wheel Pizza Tool is the perfect gift for those who love a pizza after a day out cycling! An update of one of the all-time greats, the Park Tool Pizza Tool is bigger (for better hand position), better (super sharp, large diameter stainless steel cutting wheel cuts through even the toughest terrain), and stronger! Park Tool Big Wheel Pizza Tool Features A top quality pizza cutter that looks like an Ordinary bicycle (or Penny Farthing) Stainless steel cutting blade cuts pizza effortlessly and works on all thicknesses High strength chassis Complete with own display stand.

SEE OFFER

Pipe cutter and hydraulic fitting inserts Park Tool Noir One size Unisex 134.01 GBP • Cuts hydraulic brake hoses (does not cut steel braided hydraulic hoses) • Installs pressed-style grooved pipe inserts • Replaceable parts, including the pin tip and stainless steel blade • Hard anodised body for better tool wear • Lightweight CNC machined aluminium body Replacement parts: • Cutting blade 2494K (set of 2) • Pusher tip 2497

SEE OFFER

Park Tool PCS-10.3 Deluxe Home Mechanic Repair Stand Blue / Black 180 GBP

SEE OFFER

Repair stand Park Tool Bleu One size Unisex 275.02 GBP The all-steel construction of the stand with tear-shaped tubes ensures maximum rigidity and stability, with tubular support spacers, a locking support yoke, and enhanced internal components for improved reliability. The PCS-10.3 can support up to 80 lb. (36 kg), making it compatible with almost all two-wheeled pedal bikes, including large bikes and most electric bikes. *The PCS-10.3 features an adjustable height integrated parts tray, as well as accessory ports for the Park Tool 106 work tray or PTH-1 paper towel holder (both sold separately), so your tools and small parts are always within reach. It quickly folds for storage and transport with a smooth functioning leg support system that draws both legs up in one motion.The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to keep almost any bike off the ground for adjustments, cleaning, and repairs.*: The maximum weight capacity of the PCS-10.3 assumes that the weight is centered under the clamp and between t...

SEE OFFER

Evolution Power Tools 009-0001X R230DCT 230mm Disc Cutter 2000W 240V 137.03 GBP R230DCT 230mm Disc Cutter 2000W Range - Evolution Power Tools 009-0001X, Evolution R230DCT 230mm Disc Cutter 240V Version. Evolution Power Tools 009-0001X R230DCT 230mm Disc Cutter 2000W 240V

SEE OFFER

Foldable repair stand Park Tool Bleu One size Unisex 214.96 GBP The all-steel construction of the stand with tear-shaped tubes ensures maximum rigidity and stability, with tubular support spacers, a locking support yoke, and enhanced internal components for improved reliability. The PCS-10.3 can support up to 80 lb. (36 kg), making it compatible with almost all two-wheeled pedal bikes, including large bikes and most electric bikes. *The PCS-10.3 features an adjustable height integrated parts tray, as well as accessory ports for the Park Tool 106 work tray or PTH-1 paper towel holder (both sold separately), so your tools and small parts are always within reach. It quickly folds for storage and transport with a smooth functioning leg support system that draws both legs up in one motion.The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to keep almost any bike off the ground for adjustments, cleaning, and repairs.*: The maximum weight capacity of the PCS-10.3 assumes that the weight is centered under the clamp and between t...

SEE OFFER

Park Tool Cn-10 Professional Cable And Housing Cutter Tool Black / Blue One Size unisex 44.48 GBP The Cn-10 Cable And Housing Cutter Is A Shop Quality Cutter Designed Specifically For Use On All Bicycle Cables And Housing, Including Hard-To-Cut Index Housing.Cn-10 Features:- Cold Forged, Heat Treated Steel Handles For Strength- Precision Ground Cutting Jaws For A Clean Cut On Every Cable- Built In Crimper For Cable End Caps And Forming Hole For Reforming Housing Ends And Housing Ferrules- Wire Latch Holds Handles Together When Not In Use

SEE OFFER

Park Tool Park Shop Cone Wrench 19mm - Size: 23 Mm - male 13.98 GBP The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance. The special Y" head design puts more material where it's needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use. Sizes 13mm to 20mm, SCW-13 through SCW-20. Set Includes 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 26mm 28mm

SEE OFFER

Park Tool Pizza Cutter 24.45 GBP What more could you want than pizza after a good day of wrenching or riding? An update of one of the all-time greats, the PZT-2 Pizza Tool is bigger (for better hand position), better (super sharp, large diameter stainless steel cutting wheel cuts through even the toughest terrain), and stronger! Amaze your friends, show off to your in-laws; a bicycle and also a pizza cutter!

SEE OFFER

TEFAL Easy Fry FW402HG0 Air Fryer & Pizza Cutter - Black, Black 145.98 GBP Bake delicious golden pizzas for the whole family with this Tefal Easy Fry's 4.5 litre capacity and serve perfect slices using the pizza cutter. It's more than just an air fryer though. With nine preset programs, you can whip up everything from crispy fries to flaky fish - even desserts come out just right. And since it cooks up to 45% faster than traditional ovens, dinner hits the table in no time.Good to know- With Extra Crisp technology and double heaters, your food turns out hot and crunchy before you know it- The digital touchscreen makes it easy to select programs and adjust temperatures- Keep an eye on your cook through the viewing window - no more pausing or popping the basket open- The non-stick basket is dishwasher-safe, making clean up a breeze- Download the Tefal app for delicious recipes based on your ingredients and personal flavour picks

SEE OFFER

Vogue Pizza Cutter 32.16 GBP 125(H) x 520(W) x 1(D)mm. Stainless Steel. Black. Cuts in single motion. Weight 0.65kg. Highly durable.

SEE OFFER

Park Tool CN-10 Cable and Housing Cutter - Size: one size - male 49.99 GBP The Park ToolCN-10 Cable and Housing Cutter are a top quality tool which are ideal for inner wires and outer casing, including index gear cables. Park have kitted out this bicycle tool with all the features you need to make maintaining your bike a breeze! These Park Tools boast precision ground cutting jaws which deliver a clean cut every time. What's more the built in crimper is great for cable end caps, while a forming hole reforms cable housing and ferrules. Incredibly easy to use, this bike tool's handle has been cold forged and heat treated and is made out of steel for amazing strength. What's more, the grips are dual density and contoured for outstanding comfort as well as control. Completing the fantastic Park Tool CN-10 Cable and Housing Cutter is a wire latch to hold the handles together making for easy storage. Park Tool CN-10 Cable and Housing Cutter Features Top quality cable cutters for inner wires and outer casing, including index gear cables Precision ground cutting jaws make for a clean cut every time Cold forged and heat treated steel handles for massive strength Dual density moulded grips are contoured for comfort and control Built in crimper for cable end caps Forming hole for reforming cable housing and ferrules A wire latch holds the handles together for storage

SEE OFFER

Park Tool CN10C - Pro Cable and Housing Cutter 44.5 GBP The Park Tool CN10C Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. Cold forged, heat treated steel handles for strengthPrecision ground cutting jaws for a clean cut on every cableBuilt in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in useThe CN10C has cold forged, heat treated steel handles for strength and precision ground cutting jaws for a clean cut on every cable. Dual density moulded grips are specially contoured for superior comfort and control. The CN10C has a built in crimper for cable end caps and a forming hole for reforming housing ends and housing ferrules. A wire latch holds the handles together when not in use.

SEE OFFER

Park Tool CN10C Pro Cable / Housing Cutter Black/Blue 42.99 GBP Top quality cable cutters for inner wires and outer casing, including index gear cablesPrecision ground cutting jaws make for a clean cut every timeCold forged and heat treated steel handles for massive strengthDual density moulded grips are contoured for comfort and controlBuilt in crimper for cable end capsForming hole for reforming cable housing and ferrulesA wire latch holds the handles together for storage

SEE OFFER

Cable cutter Park Tool Noir One size Unisex 68.73 GBP Cold forged steel handles, heat treated for added strengthPrecision ground cutting jaws for a clean cut on every cableIntegrated crimping tool for cable ends and a forming hole to reshape housing ends and end capsThe wire latch keeps the handles together when not in use

SEE OFFER

Park Tool Pro Cable And Housing Cutter 44.99 GBP Top quality cable cutters for inner wires and outer casing including index gear cables. Precision ground cutting jaws make for a clean cut every time Cold forged and heat treated steel handles for massive strength Dual density moulded grips are contoured for comfort and control Built in crimper for cable end caps Forming hole for reforming cable housing and ferrules A wire latch holds the handles together for storage Covered by Park Tool's legendary limited lifetime warranty

SEE OFFER

CK Tools T3883 Ecotronic ESD Side Cutters (Micro) 16.69 GBP C.K Ecotronic ESD Micro Side Cutters - CK Tools T3883, These lightweight, precision micro side cutters from C.K are ideal for fine cutting applications especially in microelectronics and precision mechanics. CK Tools T3883 Ecotronic ESD Side Cutters (Micro)

SEE OFFER

Soft Grip Pizza Cutter Charcoal Grey - Kitchenaid 10.09 GBP Slice through even the thickest pizza crust with the KitchenAid Soft Grip Pizza Cutter in Charcoal Grey. This pizza wheel features a sturdy stainless steel cutting blade that will safely and easily slice through your pizza. The soft grip handle is comfortable to hold and features a debossed logo. There's also a built-in finger guard for additional safety. Angled for optimal comfort and performance, the pizza cutter is designed to keep toppings intact whilst slicing. The dimensions of the soft grip pizza cutter are L23cm x W10.3cm. You can easily clean the KitchenAid Soft Grip Pizza Cutter in the dishwasher and it comes with a manufacturer's one year guarantee.

SEE OFFER

Vogue Pizza Cutter 32.85 GBP 125(H) x 520(W) x 1(D)mm. Stainless Steel. Black. Cuts in single motion. Weight 0.65kg. Highly durable.

SEE OFFER

Joseph Joseph Ringo™ Easy-clean Red Pizza Cutter 16.95 GBP This super-handy pizza cutter slices everything from pizzas, pastries and sandwiches. Experience effortless cutting with its circular stainless-steel blade and ergonomic design. After use, simply pull the blade out from the handle for easy cleaning. Sharp stainless-steel blade delivers effortless, accurate cutting. The removable blade ensures you can easily clean it and reattach when needed. Features an ergonomic handle for accurate slicing. Store it with ease, or use the hanging hole to save space. Ideal for cutting pizzas, pastries, pies and sandwiches. Joseph Joseph Ringo™ Easy-clean Pizza Cutter, Red

SEE OFFER

Park Tool Pizza Cutter

Comparison of similar products