Review Fiio k13 compact desktop r2r architecture dac and headphone

FIIO K11 Compact Desktop DAC and Headphone Amplifier 123.98 GBP A variety of inputs and outputs On the K11 are USB*, optical and coaxial inputs as well as 4.4mm, 6.35mm, RCA line, and coaxial outputs*. Having more inputs and outputs than other typical entry-level amps means the K11 is more than capable of meeting your needs of putting together a capable audio setup. *USB connection to phones for decoding does not consume the phone’s battery *Coaxal input and output share the same physical connector, Coaxal output can only be used in USB mode Large power output Under a 32Ω load, the K11 is capable of pushing 1400mW under balance modes. This allows it to easily drive many HiFi earphones and headphones to fully unlock their potential. 3 gain levels, 3 volume curves The K11 has 3 separate gain levels, each gain level having its own volume curve. This allows the K11 to give you a better listening experience with various types of headphones, whether you are using sensitive earphones or harder-to-drive over-ear headphones. Specially designed audio circuit and power supply Within the K11’s slim build lies a specially designed audio circuit designed for great sound quality. This is backed by more than 16 low-noise LDOs for precise voltage stabilization and powered by an external 12V switching power supply. All of this leads to a purer and more robust supply of power, leading to stable high-quality audio and thus truly enjoyable music all of the time. Slim and stable The slim aluminium alloy body allows you to easily place the K11 anywhere, making it easier to put the device in a way that compliments the rest of your desk. Thanks to the silicon anti-slip pad, the K11 rests stably and firmly on your table too. Clear always-on display A custom, high-contrast and durable VA display allows you to easily see the sampling rate, volume, gain, or output mode with just a glance. Adjustable RGB logo lightning The FiiO logo is illuminated with RGB lightning, giving you a quick way to identify the sampling rate of the current audio being played back. Six LED strips work in conjunction with a carefully placed reflective film and parts of the body designed to reflect light to make the light show uniform and elegant. One multifunction volume knob In the K11’s minimalist design, the volume knob acts as a critical source of control. The K11’s multifunction volume knob is used to power the device on and off, for menu operation, for volume adjustment, and for functions. The knob is designed so that you can quickly execute various complex actions by simply pressing and turning the knob. You can also quickly switch between LO/PO modes by double-pressing the knob, making it easier for you to appropriately connect to different headphones or audio setups. Driver-free mode for plug-and-play The K11 used in USB DAC mode does not require a driver on Windows 10 and above systems, and can also be used with video game consoles such as the PS5 and the Switch. Simply plug and play for worry-free usage whether you are...

SEE OFFER

FiiO K9 PRO Desktop Headphone Amplifier & DAC (ESS Edition) 703.98 GBP FiiO has designed the new K9 Pro using two high-performance ES9038 Pro DAC chips from Sabre Technologies. The ES9038 Pro is a flagship-grade 8-channel DAC that is capable of providing ground-breaking performance in decoding high-resolution audio signals. FiiO has upgraded the K9 Pro ESS from the OG K9 Pro in terms of DAC count, the OG K9 Pro has only a single AK4499 DAC, the latest K9 Pro here has dual ES9038 Pro DAC Chips. With the help of this new DAC chipset, the K9 Pro ESS achieves ultra-low THD+N(<0.00025%) and high SNR(>129dB) ratings ensuring a super-clean performance. Powerful Signal Amplification Circuit Consisting of two high-performance THX AAA 78+ amplifier chips, the K9 Pro ESS provides a clean and powerful output signal. It brings the best out of our connected headphones/in-ear monitors with its clean output power signal. There is no noticeable background noise or distortion even with highly-sensitive headphones and in-ear monitors, simply plug in your favourite headphones on the K9 Pro ESS and indulge yourself in an extraordinary sound experience. Precise Design Profile FiiO has years of expertise in designing HiFi audio products. They have designed the new K9 Pro ESS with a fully differential circuit in which the signal goes through the DAC, Volume, and AMP sections in a fully balanced manner. It also has a six-stage audio circuitry to ensure the users get the best possible sound performance. The analogue and digital circuits have separated designs with partitions for clean performance. Multiple Input/Output Options The FiiO K9 Pro is a hub for all your audio needs. It features multiple audio input/output options that include RCA/Coaxial/Bluetooth/Optical/USB/4.4mm input ports. For output the device features line-out functionality via 4-Pin XLR balanced*2, RCA line-out and headphone output via 4.4mm/4-Pin XLR Dual Independent Femtosecond Clocks FiiO has featured dual independent Femtosecond clocks to provide a precise clock management system. It makes it easier to handle different sources while maintaining maximum quality performance. True MQA Support With Hi-Res Signal Decoding MQA, Master Quality Authenticated is the latest technology where we get high-res performance in small file sizes. K9 Pro ESS supports full MQA unfolding allowing the users to listen to the true master quality performance as the artist intended while recording. Apart from these high-res MQA Support, the K9 Pro also supports high-res 32-Bit/384kHZ PCM as well as native DSD256 decoding. High-Resolution Bluetooth Support FiiO K9 Pro ESS features Qualcomm’s latest QC5124 Bluetooth processor chip. It not only provides a stable, reliable Bluetooth connection but also brings support for high-resolution wireless codecs including LDAC, APTX HD, AptX Adaptive, and more. Simply connect your smartphone or any other media device with Bluetooth support and feed the audio signal to the K9 Pro ESS over a Wireless Bluetooth connection. App-control and Other...

SEE OFFER

FiiO K9 PRO Desktop Headphone Amplifier & DAC (ESS Edition) (Missing outer box) 523.98 GBP FiiO has designed the new K9 Pro using two high-performance ES9038 Pro DAC chips from Sabre Technologies. The ES9038 Pro is a flagship-grade 8-channel DAC that is capable of providing ground-breaking performance in decoding high-resolution audio signals. FiiO has upgraded the K9 Pro ESS from the OG K9 Pro in terms of DAC count, the OG K9 Pro has only a single AK4499 DAC, the latest K9 Pro here has dual ES9038 Pro DAC Chips. With the help of this new DAC chipset, the K9 Pro ESS achieves ultra-low THD+N(<0.00025%) and high SNR(>129dB) ratings ensuring a super-clean performance. Powerful Signal Amplification Circuit Consisting of two high-performance THX AAA 78+ amplifier chips, the K9 Pro ESS provides a clean and powerful output signal. It brings the best out of our connected headphones/in-ear monitors with its clean output power signal. There is no noticeable background noise or distortion even with highly-sensitive headphones and in-ear monitors, simply plug in your favourite headphones on the K9 Pro ESS and indulge yourself in an extraordinary sound experience. Precise Design Profile FiiO has years of expertise in designing HiFi audio products. They have designed the new K9 Pro ESS with a fully differential circuit in which the signal goes through the DAC, Volume, and AMP sections in a fully balanced manner. It also has a six-stage audio circuitry to ensure the users get the best possible sound performance. The analogue and digital circuits have separated designs with partitions for clean performance. Multiple Input/Output Options The FiiO K9 Pro is a hub for all your audio needs. It features multiple audio input/output options that include RCA/Coaxial/Bluetooth/Optical/USB/4.4mm input ports. For output the device features line-out functionality via 4-Pin XLR balanced*2, RCA line-out and headphone output via 4.4mm/4-Pin XLR Dual Independent Femtosecond Clocks FiiO has featured dual independent Femtosecond clocks to provide a precise clock management system. It makes it easier to handle different sources while maintaining maximum quality performance. True MQA Support With Hi-Res Signal Decoding MQA, Master Quality Authenticated is the latest technology where we get high-res performance in small file sizes. K9 Pro ESS supports full MQA unfolding allowing the users to listen to the true master quality performance as the artist intended while recording. Apart from these high-res MQA Support, the K9 Pro also supports high-res 32-Bit/384kHZ PCM as well as native DSD256 decoding. High-Resolution Bluetooth Support FiiO K9 Pro ESS features Qualcomm’s latest QC5124 Bluetooth processor chip. It not only provides a stable, reliable Bluetooth connection but also brings support for high-resolution wireless codecs including LDAC, APTX HD, AptX Adaptive, and more. Simply connect your smartphone or any other media device with Bluetooth support and feed the audio signal to the K9 Pro ESS over a Wireless Bluetooth connection. App-control and Other...

SEE OFFER

FiiO K9 PRO Desktop Headphone Amplifier & DAC (ESS Edition) (Damaged packaging) 533.98 GBP FiiO has designed the new K9 Pro using two high-performance ES9038 Pro DAC chips from Sabre Technologies. The ES9038 Pro is a flagship-grade 8-channel DAC that is capable of providing ground-breaking performance in decoding high-resolution audio signals. FiiO has upgraded the K9 Pro ESS from the OG K9 Pro in terms of DAC count, the OG K9 Pro has only a single AK4499 DAC, the latest K9 Pro here has dual ES9038 Pro DAC Chips. With the help of this new DAC chipset, the K9 Pro ESS achieves ultra-low THD+N(<0.00025%) and high SNR(>129dB) ratings ensuring a super-clean performance. Powerful Signal Amplification Circuit Consisting of two high-performance THX AAA 78+ amplifier chips, the K9 Pro ESS provides a clean and powerful output signal. It brings the best out of our connected headphones/in-ear monitors with its clean output power signal. There is no noticeable background noise or distortion even with highly-sensitive headphones and in-ear monitors, simply plug in your favourite headphones on the K9 Pro ESS and indulge yourself in an extraordinary sound experience. Precise Design Profile FiiO has years of expertise in designing HiFi audio products. They have designed the new K9 Pro ESS with a fully differential circuit in which the signal goes through the DAC, Volume, and AMP sections in a fully balanced manner. It also has a six-stage audio circuitry to ensure the users get the best possible sound performance. The analogue and digital circuits have separated designs with partitions for clean performance. Multiple Input/Output Options The FiiO K9 Pro is a hub for all your audio needs. It features multiple audio input/output options that include RCA/Coaxial/Bluetooth/Optical/USB/4.4mm input ports. For output the device features line-out functionality via 4-Pin XLR balanced*2, RCA line-out and headphone output via 4.4mm/4-Pin XLR Dual Independent Femtosecond Clocks FiiO has featured dual independent Femtosecond clocks to provide a precise clock management system. It makes it easier to handle different sources while maintaining maximum quality performance. True MQA Support With Hi-Res Signal Decoding MQA, Master Quality Authenticated is the latest technology where we get high-res performance in small file sizes. K9 Pro ESS supports full MQA unfolding allowing the users to listen to the true master quality performance as the artist intended while recording. Apart from these high-res MQA Support, the K9 Pro also supports high-res 32-Bit/384kHZ PCM as well as native DSD256 decoding. High-Resolution Bluetooth Support FiiO K9 Pro ESS features Qualcomm’s latest QC5124 Bluetooth processor chip. It not only provides a stable, reliable Bluetooth connection but also brings support for high-resolution wireless codecs including LDAC, APTX HD, AptX Adaptive, and more. Simply connect your smartphone or any other media device with Bluetooth support and feed the audio signal to the K9 Pro ESS over a Wireless Bluetooth connection. App-control and Other...

SEE OFFER

FiiO K15 Desktop DAC and Headphone Amplifier 503.98 GBP Upgrade your desktop audio scene with the all-new FiiO K15, it’s a feature-packed all-in-one Desktop DAC, Streamer, and Headphone Amplifier. Equipped with all-new flagship-grade AKM AK4497S “Velvet Sound” DAC chipset and a fully balanced, differential signal path from DAC to amplifier for supreme channel separation and minimal noise. It packs a precisely designed, discrete Class-AB amp circuit that promises up to 3,000mW per channel output. FiiO K15 can be used as a streamer as well, it has Roon Ready certification, and full compatibility with Apple AirPlay 2. FiiO K15 can be used in multiple scenarios, such as a standalone DAC, a dedicated headphone amplifier, a complete network streamer, or a proper all-in-one device handling all these previously mentioned tasks simultaneously. All-New AKM Dual-DAC Chipset FiiO K15 brings an advanced dual DAC chipset featuring AKM’s latest AK4479SVQ DAC chips. They feature upgraded “Velvet Sound” audio technology, promising silky smooth Hi-Res audio signal processing with ultra-low distortion, wide dynamic range, and extended signal bandwidth. These are the latest flagship-grade 32-bit DAC chips developed by AKM. Powerful Output With Discrete Class AB Headphone Amplification Circuit FiiO has equipped the K15 with a professionally designed discrete Class AB headphone amplifier circuit. It features OPAMPs+Transistor current-boosting design. The K15 houses a pair of ON Semiconductor MJE243G/253G chips that deliver high-current amplification and low-impedance output. This setup produces a strong output reaching up to 3W per channel. With such tremendously powerful output, the FiiO K15 easily drives full-sized headphones. Its low-impedance output makes it compatible with high-sensitivity IEMs as well. FiiO also have a five-level adjustable gain for easy pairing with both low-sensitivity and high-sensitivity audio gear. Fully Balanced Audio Circuitry FiiO has designed the K15 with a fully balanced audio circuitry. Everything on the K15, the DAC decoding, low-pass filtering, gain control, and headphone amplification, the entire audio circuitry has a fully balanced design. It ensures clean output with ultra-low distortion, reduced crosstalk, minimal noise, and wide dynamic range. Independent Audio Circuits FiiO K15 features independently designed audio circuits. The internal power supply, digital section, and analogue section, each have a separate and independent board. This effectively results in precise and consistent performance by different sections of the audio circuitry on the K15. Clean and Precise Power Supply Section FiiO K15 features a built-in next-generation 30W(12V~2.5A), low-noise, high-efficiency, long-lasting, industrial and instrumentation-grade power supply. It also supports an external DC power supply, which makes it compatible with external linear power supplies for enhanced performance. FiiO K15 adopts independent power supplies for digital and analogue sections....

SEE OFFER

FIIO K11 Compact Desktop R2R architecture DAC and Headphone Amplifier - BLACK (Box opened) 139.98 GBP FiiO has released a new R2R variant for its highly acclaimed K11 desktop DAC/AMP. With a self-developed fully differential 24-Bit R2R Resistor Array, the K11 R2R brings a smooth and rich sound to its listeners. The K11 R2R has NOS/OS dual operating modes, each having its own sound characteristics. The DAC/AMP houses dual headphone output options, one 6.35mm single-ended and another 4.4mm balanced port. Equipped with a powerful amp section with three-level adjustable gain and high-quality emerald solid-state capacitors, the K11 R2R delivers a strong output of 1300mW per channel. Experience a rich, smooth, organic R2R sound with the FiiO K11 R2R. Fully-Differential 24-Bit R2R DAC Array FiiO has featured its newly developed four-channel fully differential 24-bit R2R resistor array on the K11 R2R. It consists of 48 resistors per channel, a total of 192 high-precision ultra-thin film resistors with 0.1% accuracy and low-temperature drift between the four channels. It promises clean and crisp output with dark background thanks to the specially developed audio circuit architecture. NOS/OS Dual Operating Modes FiiO K11 R2R has NOS(Non-Oversampling) and OS(Oversampling) dual operating modes. These are freely switchable and offer dual sound characteristics with the device. The NOS mode maintains the original sampling rate while signal processing while the OS mode oversamples all the signals to 384kHz for processing. NOS mode results in more musical presentation while the OS mode delivers more details and clarity. Powerful Amp Section FiiO has equipped the K11 R2R with professionally designed amp circuitry. It consists of Ti OPA1642 as Low-Pass filters and then dual SGM8262 Professional-grade operational amplifiers. The K11 R2R has an output power rating of up to 1300mWx2, which is adequate enough to drive demanding headphones with ease. It has three-level gain modes for easy pairing with sensitive as well as high-power requiring gear. The K11 R2R also adopts NJW1195A precise digital volume chipset for precise volume adjustment with low distortion between the channels. Dual Headphone Output Ports FiiO K11 R2R houses dual headphone output ports. It consists of a single-ended 6.35mm port and a balanced 4.4mm output port. You can easily pair different IEMs and headphones with the K11 R2R and enjoy high-resolution music to all its glory. True High-Resolution Audio Signal Processing FiiO K11 R2R supports decoding for high-resolution audio signals. It has full support for PCM and DSD signal processing supporting up to 32-bit/384kHz PCM and DSD256 audio signals. DSD256 requires the DSD output mode to be set to native. It is internally converted into PCM for R2R signal processing. Professionally Designed Low-Noise Power Supply FiiO K11 R2R features a professionally designed low-noise power supply. It consists of 17 Low-Noise LDO precision voltage regulator ICs and 2 DC-DCs providing a multi-channel power supply. It further benefits from the external 12V power...

SEE OFFER

FiiO Q7 Portable Headphone Amplifier and DAC 728.98 GBP Presenting the all-new FiiO Q7, the ultimate flagship USB DAC/AMP from the house of FiiO. It is based on the successful architecture of M17, FiiO’s flagship digital audio player. Q7 Houses premium flagship-grade components like ES9038Pro DAC, Desktop-grade THX AA788+ dual AMP circuits, the latest XMOS XU316 16-core receiver, Qualcomm’s latest QCC5124 Bluetooth chipset, etc. Q7 Promises top-tier performance and delivers it gracefully with its flagship-grade audio circuitry. Choose the Q7 as your USB DAC/AMP if you prioritize performance over anything else!! Not Just Portable, But Transportable FiiO Q7 breaks the boundaries of portable devices. It’s a highly-capable device that got a dual power design. Users can use it portably with the in-built battery or they can connect it to a DC power source and take the performance to an all-new level of awesomeness. It has USB Type-C, Coaxial, Optical, and Bluetooth inputs. Flagship Sabre DAC Chipset FiiO Q7 houses Sabre’s flagship ES9038 Pro 32-bit DAC chipset at its heart. It provides extremely clean sound signal decoding achieving best-in-class ultra-low distortion, and noise-free sound decoding. Latest-Gen XMOS USB Processor FiiO Q7 adopts XMOS’s latest 16-core XU316 USB receiver chipset. It enables the Q7 to decode high-resolution 32-Bit PCM and native DSD signal decoding. Extremely Powerful Output With Dual THX AMP Circuits FiiO Q7 is a powerhouse, it houses boatloads of clean output power that can drive the most demanding sets on the planets with ease. Q7 comes with dual THX AA788+ amplification circuits that provide up to 3000mW of output power. It has five-level gain modes including a high-power over-ear headphone mode. High-Resolution Bluetooth Connectivity Q7 supports high-resolution Bluetooth connectivity with the help of Qualcomm’s latest QCC5124 Bluetooth chipset. It supports high-resolution wireless codecs including LDAC, APTX HD, AptX Adaptive, etc. Your Headphone Hub FiiO Q7 houses multiple headphone output ports including 3.5mm single-ended, 6.35mm single-ended, 2.5mm balanced, and 4.4mm balanced headphone ports. With its five gain levels, you can connect high-sensitivity IEMs to high-power requiring Headphones. FiiO Q7 comes packed with all the accessories you might need:

SEE OFFER

FIIO K11 Compact Desktop R2R architecture DAC and Headphone Amplifier 153.98 GBP FiiO has released a new R2R variant for its highly acclaimed K11 desktop DAC/AMP. With a self-developed fully differential 24-Bit R2R Resistor Array, the K11 R2R brings a smooth and rich sound to its listeners. The K11 R2R has NOS/OS dual operating modes, each having its own sound characteristics. The DAC/AMP houses dual headphone output options, one 6.35mm single-ended and another 4.4mm balanced port. Equipped with a powerful amp section with three-level adjustable gain and high-quality emerald solid-state capacitors, the K11 R2R delivers a strong output of 1300mW per channel. Experience a rich, smooth, organic R2R sound with the FiiO K11 R2R. Fully-Differential 24-Bit R2R DAC Array FiiO has featured its newly developed four-channel fully differential 24-bit R2R resistor array on the K11 R2R. It consists of 48 resistors per channel, a total of 192 high-precision ultra-thin film resistors with 0.1% accuracy and low-temperature drift between the four channels. It promises clean and crisp output with dark background thanks to the specially developed audio circuit architecture. NOS/OS Dual Operating Modes FiiO K11 R2R has NOS(Non-Oversampling) and OS(Oversampling) dual operating modes. These are freely switchable and offer dual sound characteristics with the device. The NOS mode maintains the original sampling rate while signal processing while the OS mode oversamples all the signals to 384kHz for processing. NOS mode results in more musical presentation while the OS mode delivers more details and clarity. Powerful Amp Section FiiO has equipped the K11 R2R with professionally designed amp circuitry. It consists of Ti OPA1642 as Low-Pass filters and then dual SGM8262 Professional-grade operational amplifiers. The K11 R2R has an output power rating of up to 1300mWx2, which is adequate enough to drive demanding headphones with ease. It has three-level gain modes for easy pairing with sensitive as well as high-power requiring gear. The K11 R2R also adopts NJW1195A precise digital volume chipset for precise volume adjustment with low distortion between the channels. Dual Headphone Output Ports FiiO K11 R2R houses dual headphone output ports. It consists of a single-ended 6.35mm port and a balanced 4.4mm output port. You can easily pair different IEMs and headphones with the K11 R2R and enjoy high-resolution music to all its glory. True High-Resolution Audio Signal Processing FiiO K11 R2R supports decoding for high-resolution audio signals. It has full support for PCM and DSD signal processing supporting up to 32-bit/384kHz PCM and DSD256 audio signals. DSD256 requires the DSD output mode to be set to native. It is internally converted into PCM for R2R signal processing. Professionally Designed Low-Noise Power Supply FiiO K11 R2R features a professionally designed low-noise power supply. It consists of 17 Low-Noise LDO precision voltage regulator ICs and 2 DC-DCs providing a multi-channel power supply. It further benefits from the external 12V power...

SEE OFFER

FiiO K19 Studio-Grade Flagship DAC and Headphone Amplifier - BLACK (Box opened) 973.98 GBP FiiO K19 is the brand’s latest flagship studio-grade DAC/AMP. Designed with top-quality components, the K19 packs an industry-leading performance. Featuring two latest 8-channel ES9039SPro flagship DAC Chips and a solid THX AAA 88+ amp section, FiiO promises clear, crisp output with a strong amp section. FiiO K19 supports a 31-band highly precise PEQ that allows you to precisely adjust the output. The strong amp section on the K19 produces a powerful 8W per channel output. FiiO K19 is here to bring the best all-in-one desktop device to you. Innovative 31-Band High-Precision lossless PEQ The FiiO K19 features DEL (Dual-Engine Limiter) technology, along with some proprietary algorithms, the K19 get access to various audio effects such as DRC (Dynamic Range Compression), and DRE (Dynamic Range Enhancement). It also has 31-band highly precise lossless PEQ that allows for adjustment between 44.1kHz to 192kHz audio signals without interfering with the sampling rate conversion (SRC). For each band, users can adjust the gain between +12 to -24dB, allowing for the output to be fully adjusted to preference. And the PEQ curves don’t have to be used only by you – PEQ presets on the K19 can be shared between users, being able to import and export PEQ presets opens up a whole new dimension to sound adjustment. Latest-Gen Flagship Dual DAC Chipset FiiO has equipped the latest K19 with two latest-generation 8-channel DAC chips from ESS Technologies. The device houses two ES9039SPro, one for each channel on the K19. These chips benefit from 4th generation 32bit Hyperstream architecture, they are capable of delivering true high-resolution audio signal processing with ultra-high dynamic range and ultra-low distortion in the output signal. High-Power 8-Channel THX Amp Section At the heart of FiiO K19, we have a high-power 8-channel THX AAA 88+ Amp chipset. The THX amp chips are connected in parallel with each other, creating a fully balanced 4-channel design architecture for the headphones. It is a powerful analogue amp section that promises a strong output of up to 8W per channel. With this much power down its sleeve, you can easily drive even the most demanding headphones on the planet and still have a lot of headroom left. Pure High-Res Sound Processing With Ultra-Precise Audio Clocks FiiO K19 houses dual industry-leading ACCUSILICON AS318-B ultra-low phase noise Accusilicon Femtosecond crystal oscillators. They are pre-screened before being selected for the K19 to ensure pure sound signal restoration during processing and result in clearer, more accurate sound signal reproduction at different sampling rates. Shock-Proof Diecast Chassis and shielded circuit boards FiiO K19 has a completely seamless design crafted with die-cast aluminium alloy material. The body is carefully polished using a multi-axis CNC machining process for a rich and premium finish. The device has a unibody design and a shock-proof internal chassis for a stable operation....

SEE OFFER

FiiO K19 Studio-Grade Flagship DAC and Headphone Amplifier 1203.98 GBP FiiO K19 is the brand’s latest flagship studio-grade DAC/AMP. Designed with top-quality components, the K19 packs an industry-leading performance. Featuring two latest 8-channel ES9039SPro flagship DAC Chips and a solid THX AAA 88+ amp section, FiiO promises clear, crisp output with a strong amp section. FiiO K19 supports a 31-band highly precise PEQ that allows you to precisely adjust the output. The strong amp section on the K19 produces a powerful 8W per channel output. FiiO K19 is here to bring the best all-in-one desktop device to you. Innovative 31-Band High-Precision lossless PEQ The FiiO K19 features DEL (Dual-Engine Limiter) technology, along with some proprietary algorithms, the K19 get access to various audio effects such as DRC (Dynamic Range Compression), and DRE (Dynamic Range Enhancement). It also has 31-band highly precise lossless PEQ that allows for adjustment between 44.1kHz to 192kHz audio signals without interfering with the sampling rate conversion (SRC). For each band, users can adjust the gain between +12 to -24dB, allowing for the output to be fully adjusted to preference. And the PEQ curves don’t have to be used only by you – PEQ presets on the K19 can be shared between users, being able to import and export PEQ presets opens up a whole new dimension to sound adjustment. Latest-Gen Flagship Dual DAC Chipset FiiO has equipped the latest K19 with two latest-generation 8-channel DAC chips from ESS Technologies. The device houses two ES9039SPro, one for each channel on the K19. These chips benefit from 4th generation 32bit Hyperstream architecture, they are capable of delivering true high-resolution audio signal processing with ultra-high dynamic range and ultra-low distortion in the output signal. High-Power 8-Channel THX Amp Section At the heart of FiiO K19, we have a high-power 8-channel THX AAA 88+ Amp chipset. The THX amp chips are connected in parallel with each other, creating a fully balanced 4-channel design architecture for the headphones. It is a powerful analogue amp section that promises a strong output of up to 8W per channel. With this much power down its sleeve, you can easily drive even the most demanding headphones on the planet and still have a lot of headroom left. Pure High-Res Sound Processing With Ultra-Precise Audio Clocks FiiO K19 houses dual industry-leading ACCUSILICON AS318-B ultra-low phase noise Accusilicon Femtosecond crystal oscillators. They are pre-screened before being selected for the K19 to ensure pure sound signal restoration during processing and result in clearer, more accurate sound signal reproduction at different sampling rates. Shock-Proof Diecast Chassis and shielded circuit boards FiiO K19 has a completely seamless design crafted with die-cast aluminium alloy material. The body is carefully polished using a multi-axis CNC machining process for a rich and premium finish. The device has a unibody design and a shock-proof internal chassis for a stable operation....

SEE OFFER

FiiO Snowsky Retro Nano Bluetooth DAC and Headphone Amplifier 63.98 GBP FiiO's new sub-brand SNOWSKY is focused on being youthful, fashionable, unique and fun, whilst also bringing the traditional FiiO hallmarks of quality and great user experience. The RETRO NANO, Snowsky's debut product, is inspired by vintage tape recorders but also packs a lot of modern tech. Truly stylish The Retro Nano features a variety of fun UIs, changeable with a single button press. The dynamic UI simulates a turning tape, bringing the classics to life. The unit is available in blue or white, and also comes with a lanyard and stickers for further customistaion. Endless power The Retro Nano uses a replaceable and rechargable 3.7V lithium battery, and lasts up to 7.5 hours on a single charge. Out of power? Simply swap for a freshly charged battery and keep going! No batteries? The USB port provides independent power also, making it easy to activate the device. Just plug in and play! The sounds of past eras Included are 8 specially tuned sound presets, including some retro sounding presets that give off the sound of past eras. You can also make your own tunings using the companion app! Easily switch between multiple devices The Retro Nano has both Bluetooth and wired modes, simply power on with a single touch and connect your phone, tablet, computer or any other device via Bluetooth or USB Type C. The dueal headphone jacks (3.5mm and 4.4mm) also offer in-line control support with noise reduction for your calls.

SEE OFFER

FIIO QX13 Portable DAC and Headphone Amplifier 203.98 GBP Fully carbon fibre body Pushing the boundaries of what can be done, the QX13 is made with up to 21 layers of stacked carbon fibre for a lightweight yet durable build. The carbon fibre also allows it to be resistant to interference and heat, while featuring a unique texture and a premium feel. Extra-large colour display The QX13 features an extra-large colour display outfitted with Corning third-gen high-strength glass for greater durability and scratch resistance, rare among audio dongles. Multiple newly developed personalised UI themes powered by a 32-bit processor ensure that the user experience is unrivalled among audio dongles, making it just right for you, whether in portrait or landscape mode. Desktop-grade DAC - Flagship ESS SABRE PRO ES9027PRO The chip features a fully differential audio architecture design with 8 channels set up in parallel, and is paired with a pair of ultra-low-noise ES9312 regulators for precise output matching on each audio channel. Audio signals are accurately restored thanks to this pair of chips’ optimised power efficiency and effectiveness in reducing clock jitter. *The ESS SABRE PRO series of DAC chips are mainly used in high-end audio systems and professional audio gear. The first generation of products included the flagship ES9038PRO, and the second generation of products included the new flagship ES9039PRO and EES9027PRO. 6 high-end TI op-amps - Powerful and stable output with high efficiency The QX13 uses four wafer-level precision-integrated INA1620 chips, with a specially designed internal layout to significantly reduce crosstalk, for no interference between channels even under extreme conditions. Additionally, two low-noise, low-distortion OPA1692 chips are employed to ensure excellent dynamics under various load conditions. [image x745] Patented Desktop Mode - Balancing performance and power consumption Thanks to its new configuration, optimised audio circuit, and more efficient heat dissipation, the QX13 in desktop mode can deliver power comparable to full-size headphone amplifiers while also significantly reducing power consumption. It also features a high-precision power meter, capable of accurately assessing the power supply capabilities of different USB sources and intelligently adjusting the headphone amplifier’s gain and output power accordingly. Patent no.: ZL202321946664.8 Digital and analogue separation - Multi-layer shielding The digital and analogue boards are separated and equipped with a shielding cover for isolation, ensuring precise and dynamic signal processing. This design also effectively absorbs and dissipates heat, enabling effective thermal management and ensuring the QX13 delivers sustained high-power output. XMOS 16-core XU316 The QX13 has pro-grade USB Audio quality, with high performance, low latency, and support of up to 768Khz/32bit PCM and DSD512 native decoding. Dual ultra-low phase noise, low temperature drift femtosecond crystal oscillators ensure that audio of...

SEE OFFER

FiiO KA15 Portable DAC and Headphone Amplifier 103.98 GBP A versatile and fun new dongle Competition amongst audio dongles is becoming increasingly intense, and FIIO knows that only “innovation” can make them stand out. Thus, the KA15 has been completely revamped inside and out. It combines FIIO’s experienced audio know-how on the inside with elements of retro tape recorder looks on the outside. The new generation of FIIO’s 5-series audio dongles inspires endless fun with avant-garde innovation and appeals to quality enthusiasts with a practical design. It brings together great sound, ergonomics, fun, and aesthetics, all into a single tiny and convenient package. Limitless enjoyment with ten-band high-precision lossless PEQ The audiophile-grade DSP allows the KA15 to feature a ten-band high-precision lossless PEQ, which operates smoothly and with high-quality thanks to FIIO’s self-developed advanced adjustment algorithms. Through the control app or the web interface*, not only can you simulate or correct the frequency response curve of headphones but you can also export, import, share, and save EQ curves. Whether you choose to use officially recommended tunings or choose to share your tunings online with other enthusiasts, you can easily enjoy setting up EQ the way you want it. *To access the web version of PEQ, please visit the FAQ section for the K15 on the FIIO official website for instructions on setup through the website. Intelligent dynamic power consumption Equipped with a high-performance, low-power processor and high-precision chips, the KA15 innovatively features real-time voltage and current monitoring for dynamic power adjustment. By recognizing the device’s playback status, it intelligently adjusts the overall power consumption, allowing your phone to run using less power. When you set a timer for music playback during the night, once the timer ends the KA15 will enter an ultra-low power sleep mode - so you don’t have to worry about your phone’s battery being low when you wake up the next day. An outstanding display The KA15 is the first to use a 0.96-inch IPS true colour LCD screen among similar dongles and supports both Chinese and English language display. The settings menus have been designed to be more intuitive and user-friendly. Additionally, the KA15 features a new retro dynamic UI, combining technological innovation with classic design. With the simulating spinning tape, you can truly feel the uniqueness of the KA15. Patented Desktop Mode Activate Desktop Mode for greater power, with balanced output power of 560mW+560mW, an astonishing increase of 207% compared to the KA5. This gives the KA15 the headroom to drive both low and high-impedance headphones. Patent no.: L202321946664.8 Dual CS43198 - Expertly tuned The golden combination of a high-performance USB chip, dual CS43198 flagship DACs + dual high-performance SGM8262 op-amps, allow for high performance in a tiny area, giving the minute KA15 dongle more sound quality than its...

SEE OFFER

FiiO K17 Desktop DAC and Headphone Amp 833.98 GBP The FiiO K17 is a headphone amplifier designed to meet the needs of dedicated headphone enthusiasts. Its custom PEQ settings are derived from FiiO’s flagship streamer, the K19, as stated by the designers. The K17 features Bluetooth connectivity as well as local USB playback, which can be easily managed through its intuitive touch screen. Additionally, it includes both analogue and digital inputs. The XLR output allows for the use of extended cables to connect to a power amplifier or a pair of active speakers when required. FiiO K17 is equipped with USB/optical/coaxial inputs, 4.4mm/6.35mm/RCA line out/coaxial outputs, and a balanced maximum undistorted sustained output power of up to 4000mW per channel at 32Ω, which can be used for all types of earbuds and headphones. M21586Q DSP Chip The K17 features an M21586Q DSP chip which is capable of double-precision 64-bit floating-point calculations and runs at a high 360MHz clock frequency. This chip is complemented by a high-performance ES9821Q ADC as well as a specially customized ultra-low phase noise femtosecond crystal oscillator. These three components allow the user, in all modes, to utilize the 31-band high-precision lossless PEQ, The PEQ is designed to ensure the audio signal is still of high fidelity even after being processed. 3.93-inch Colour Screen - touch control and remote operation With a larger colour screen, combined with a custom Android 12 build that features a custom portrait display system, the display is clear and easy to read. Interacting with the device directly is intuitive, with several options such as touch screen and remote, in order to make it is easy to handle various operations. The remote control provides a wide range of options, while the FiiO Connect app enables users to further customize all settings and select what appears on the front screen. Users have the option to display vintage VU meters as well. The K17 can function independently or be integrated into a more extensive system. Discrete Cass AB Transistor Current Amplification Headphone Amplifier The K17 is a carefully crafted fully discrete amplifier circuit for headphones. This discrete circuit is of an OP+ transistor current amplification design, equipped with the classic pair of ON Semiconductor MJE243/253 transistors. lt is capable of producing high current with low output impedance. The result is up to 4000mW+4000mW output power in balanced mode, allowing it to easily drive various kinds of headphones and lEMs and to produce smooth, pleasant, and natural sound. AKM flag ship DAC AK4191+AK4499EX*2 The K17 has a flagship AKM DAC chip combination - AK4191 + AK4499EX*2. TWO AK4499EX chips handle each channel. The 8-channel to 4-channel LPF design reduces common mode interference, resulting in better channel separation and dynamics. lt also features a newly designed architecture with fully separated digital/analogue portions, which also incorporates the newly developed "DWA ROUTING"...

SEE OFFER

HiFiMAN Ananda BT Bluetooth Planar Headphones with R2R DAC Technology 742.99 GBP The HIFIMAN Ananda-BT Hymalaya R2R Planar Magnetic Headphones offer a revolutionary approach to wireless audio, combining advanced technology with exceptional sound quality. Designed for audiophiles who seek the ultimate listening experience, these headphones feature a unique R2R DAC (Digital-to-Analog Converter) that delivers a remarkable level of detail and clarity, ensuring that every note is rendered with precision. Equipped with HIFIMAN's renowned planar magnetic drivers, the Ananda BT R2R headphones provide a wide frequency response and outstanding dynamic range. This design not only enhances bass performance but also maintains the fidelity of high frequencies, resulting in a natural and immersive soundstage. The comfortable ergonomic design, including soft ear pads and an adjustable headband, allows for extended listening sessions without fatigue, making them perfect for both casual listeners and serious audiophiles alike. With Bluetooth connectivity and an integrated R2R DAC, the Ananda BT R2R headphones offer unparalleled versatility. Users can enjoy high-resolution audio without the constraints of cables, while the built-in rechargeable battery ensures long hours of uninterrupted playback. Elevate your audio experience with the HIFIMAN Ananda BT R2R Planar Magnetic Headphones, where cutting-edge technology meets luxurious comfort for a truly exceptional listening journey.

SEE OFFER

FiiO Tiny A or B - Direct Plug in DAC and Headphone Amplifier Dongle 23.98 GBP 10-Band PEQ Tuning With a built-in audiophile-grade DSP chip, you can precisely dial in your sound with 10 adjustable frequency bands. Use the FIIO Control App or web interface to fine-tune the frequency, gain, and Q-value to your liking. You can also save your custom sound profiles on the cloud server and share them with others, bringing a personal and social twist to your experience. Dual Versions With Different Connectors TINY A: 3.5mm + Type-C, supports up to 2A/20V fast charging, allows for music listening while charging. TINY B: 3.5mm+4.4mm headphone outputs, a single-ended architecture achieving power output comparable to a balanced one, supporting simultaneous output from both ports. Tiny Yet Powerful With support for high-resolution audio up to PCM 384kHz/32bit and DSD256, the TINY works seamlessly with everything from your smartphone and PC to even professional audio equipment. It may be a small device, but it packs powerful performance. In-line Controls and Microphone The TINY supports in-line controls and call recording, giving you quick and easy command of your audio. Use your headphones’ in-line controls to not only control music playback and volume, but also handle calls, sing karaoke, record, or even voice chat while gaming. Compact Metal Design A minimalist plug-and-play design with a T-shaped side output prevents bending during use. Just plug it in and you’re ready to go—portable, effortless, and convenient. The TINY’s full metal body is crafted through precise CNC and polishing processes for a smooth, vivid finish. Widely Compatible With support for Android/iOS/HarmonyOS/Windows/MacOS/Linux, you can conveniently use the TINY with various other devices. The TINY supports both UAC2.0 and 1.0 protocols. The UAC1.0 mode provides easy compatibility with non-Android gaming devices like the Switch and PS5, improving both sound quality and the user experience when used with those devices.

SEE OFFER

FiiO KA5 USB DAC Headphone Amp with 3.5mm and 4.4mm Outputs - BLACK (Box opened) 93.98 GBP Flagship dual DACs - For excellent sound The KA5 features dual Cirrus Logic CS43198 DACs, known for their efficiency and their ability to sound good with a wide variety of music, to give you a serious upgrade to your sound. High-Res decoding The KA5 supports up to 32bit/768kHz PCM and DSD256 decoding, allowing you to really dig into and listen to the heart of your music, no matter what device you may have it connected to. Serious components - Serious power For better audio performance, the KA5 utilizes a 6-layer immersion-gold PCB as well as high-performance ultra-low noise op amps for powerful, robust sound. Bold Ruggedness and Highly Capable The aggressive lines of the KA5 give it a bold look, while the carefully designed texture makes it a joy to handle. The dual outputs on the right side of the KA5 hint at its powerful capabilities. The KA5 is an all-metal construction with front and rear tempered glass. With a 4.4mm balanced headphone output and a 3.5mm single-ended headphone output. The 3.5mm output also supports SPDIF output so after enabling the SPDIF output in the settings menu, you can connect the KA5 to a higher-end external decoder. The OLED display and physical buttons make navigating the settings menu and looking at the playback display more straightforward and intuitive. In addition, the KA5’s built-in MCU processor handles complex operations with ease, further making the KA5 a joy to use. OLED display with customizable screen timeout and brightness Multifunction key to navigate menus and play/pause music Volume buttons can be operated in A/B modes*, to better suit your usage habits. *Volume buttons A/B mode A mode: Volume+ button: short press once to increase volume 1 level, long press for 2 seconds to play previous track, and press to go page up in settings menu. Volume– button acts in the opposite way. B mode: Volume+ button: short press once to play previous track, long press to increase volume, and press to go page up in settings menu. Volume– button acts in the opposite way. FiiO Control App – for additional functions Besides the local KA5 operating system, you can use the FiiO Control App to control the KA5. Use either method to conveniently dial in the KA5 exactly how you want it. Small in size - But large in functionality Despite the KA5’s compact size, it packs a ton of functionality – such as high and low gain, 5 selectable filters, L/R channel balance, and screen flip. Let the KA5 redefine what a tiny audio dongle can do for you. UAC 1.0 support - For truly immersive gaming! With the UAC 1.0 mode you can connect the KA5 to the Switch and other various devices, allowing you to experience rich and detailed sound effects that make your gaming sessions much more immersive. *With the KA5 not connected to any device and switched off, press and hold the multifunction key. While holding the key, connect the KA5 to your desired device to enable UAC 1.0 mode. Several adapter cables are included...

SEE OFFER

FiiO KA5 USB DAC Headphone Amp with 3.5mm and 4.4mm Outputs - WHITE (Box opened) 93.98 GBP Flagship dual DACs - For excellent sound The KA5 features dual Cirrus Logic CS43198 DACs, known for their efficiency and their ability to sound good with a wide variety of music, to give you a serious upgrade to your sound. High-Res decoding The KA5 supports up to 32bit/768kHz PCM and DSD256 decoding, allowing you to really dig into and listen to the heart of your music, no matter what device you may have it connected to. Serious components - Serious power For better audio performance, the KA5 utilizes a 6-layer immersion-gold PCB as well as high-performance ultra-low noise op amps for powerful, robust sound. Bold Ruggedness and Highly Capable The aggressive lines of the KA5 give it a bold look, while the carefully designed texture makes it a joy to handle. The dual outputs on the right side of the KA5 hint at its powerful capabilities. The KA5 is an all-metal construction with front and rear tempered glass. With a 4.4mm balanced headphone output and a 3.5mm single-ended headphone output. The 3.5mm output also supports SPDIF output so after enabling the SPDIF output in the settings menu, you can connect the KA5 to a higher-end external decoder. The OLED display and physical buttons make navigating the settings menu and looking at the playback display more straightforward and intuitive. In addition, the KA5’s built-in MCU processor handles complex operations with ease, further making the KA5 a joy to use. OLED display with customizable screen timeout and brightness Multifunction key to navigate menus and play/pause music Volume buttons can be operated in A/B modes*, to better suit your usage habits. *Volume buttons A/B mode A mode: Volume+ button: short press once to increase volume 1 level, long press for 2 seconds to play previous track, and press to go page up in settings menu. Volume– button acts in the opposite way. B mode: Volume+ button: short press once to play previous track, long press to increase volume, and press to go page up in settings menu. Volume– button acts in the opposite way. FiiO Control App – for additional functions Besides the local KA5 operating system, you can use the FiiO Control App to control the KA5. Use either method to conveniently dial in the KA5 exactly how you want it. Small in size - But large in functionality Despite the KA5’s compact size, it packs a ton of functionality – such as high and low gain, 5 selectable filters, L/R channel balance, and screen flip. Let the KA5 redefine what a tiny audio dongle can do for you. UAC 1.0 support - For truly immersive gaming! With the UAC 1.0 mode you can connect the KA5 to the Switch and other various devices, allowing you to experience rich and detailed sound effects that make your gaming sessions much more immersive. *With the KA5 not connected to any device and switched off, press and hold the multifunction key. While holding the key, connect the KA5 to your desired device to enable UAC 1.0 mode. Several adapter cables are included...

SEE OFFER

Shanling EH2 Desktop R2R DAC and Amplifier - SILVER (Box opened) 302.99 GBP Compact R2R DAC with extra power! As the next step in the quest for the most natural sound, Shanling looked at some of its most legendary audio designes and recreated their sound with the new R2R DAC. 24 bit architecture with 192 high-precision 0.1% resistors, offering a unique sounding alternative to standard DAC designs. The EH2 features two independent audio circuits, headphone and pre/line ouputs. The headphone amplifier has increased driving power and is tuned for a beautifully rich and smooth sound. The pre/line output is a direct output from the R2R DAC combined with OPA1612 low-pass filters, fully preserving the authentic character of the R2R DAC. Digital Inputs - from basics to wireless As well as the standard USB input, the EH2 adds extra SPDIF coaxial and optical inputs, for easy connection to a wider range of classic A/V equipment. Bluetooth brings the convenience of a wireless connection, using the Qualcomm QCC5125 module with its brilliant support of LDAC, aptX Adaptive and AAC, providing a stable connection for all types of devices. Hardware level customisation With built in chipsets for tone control, the EH2 provides a direct solution for treble and bass adjustments. Quick and simple tuning changes provide you a sound better suited to your individual tastes. Designed for highly demanding headphones The EH2's high powered headphone amplifier was optimized for use with full size headphones, providing low distortion output reaching over 4W at 32 Ohms, making sure that even the hardest to drive headphones can be fully powered from this one compact device.

SEE OFFER

FiiO KA5 USB DAC Headphone Amp with 3.5mm and 4.4mm Outputs 118.98 GBP Flagship dual DACs - For excellent sound The KA5 features dual Cirrus Logic CS43198 DACs, known for their efficiency and their ability to sound good with a wide variety of music, to give you a serious upgrade to your sound. High-Res decoding The KA5 supports up to 32bit/768kHz PCM and DSD256 decoding, allowing you to really dig into and listen to the heart of your music, no matter what device you may have it connected to. Serious components - Serious power For better audio performance, the KA5 utilizes a 6-layer immersion-gold PCB as well as high-performance ultra-low noise op amps for powerful, robust sound. Bold Ruggedness and Highly Capable The aggressive lines of the KA5 give it a bold look, while the carefully designed texture makes it a joy to handle. The dual outputs on the right side of the KA5 hint at its powerful capabilities. The KA5 is an all-metal construction with front and rear tempered glass. With a 4.4mm balanced headphone output and a 3.5mm single-ended headphone output. The 3.5mm output also supports SPDIF output so after enabling the SPDIF output in the settings menu, you can connect the KA5 to a higher-end external decoder. The OLED display and physical buttons make navigating the settings menu and looking at the playback display more straightforward and intuitive. In addition, the KA5’s built-in MCU processor handles complex operations with ease, further making the KA5 a joy to use. OLED display with customizable screen timeout and brightness Multifunction key to navigate menus and play/pause music Volume buttons can be operated in A/B modes*, to better suit your usage habits. *Volume buttons A/B mode A mode: Volume+ button: short press once to increase volume 1 level, long press for 2 seconds to play previous track, and press to go page up in settings menu. Volume– button acts in the opposite way. B mode: Volume+ button: short press once to play previous track, long press to increase volume, and press to go page up in settings menu. Volume– button acts in the opposite way. FiiO Control App – for additional functions Besides the local KA5 operating system, you can use the FiiO Control App to control the KA5. Use either method to conveniently dial in the KA5 exactly how you want it. Small in size - But large in functionality Despite the KA5’s compact size, it packs a ton of functionality – such as high and low gain, 5 selectable filters, L/R channel balance, and screen flip. Let the KA5 redefine what a tiny audio dongle can do for you. UAC 1.0 support - For truly immersive gaming! With the UAC 1.0 mode you can connect the KA5 to the Switch and other various devices, allowing you to experience rich and detailed sound effects that make your gaming sessions much more immersive. *With the KA5 not connected to any device and switched off, press and hold the multifunction key. While holding the key, connect the KA5 to your desired device to enable UAC 1.0 mode. Several adapter cables are included...

SEE OFFER

FiiO BTR15 Bluetooth Headphone Amplifier - BLACK (Box opened) 93.98 GBP Change modes with just one button Due to the BTR15’s ability to work as a Bluetooth receiver and as a USB DAC, we have implemented a PC/BT/PHONE mode button on it. With just a click of a button, you can quickly switch between the three different modes to match your current scenario for listening to high-quality music. Global parametric EQ, be the master of your music The BTR15 features a global parametric equalizer (PEQ). Through FIIO’s self-developed PEQ algorithm and user interface, in any mode* you can choose the exact frequencies to be adjusted along with their gain levels and bandwidth – allowing you to fine-tune the sound to exactly the way you want it. Dual-core upgrade, two modes of high-res audio The upgrades start from the heart of the BTR15, specifically the cores that power it. The BTR15 employs the high-performance combination of the Qualcomm QCC5125 Bluetooth chip = XMOS 16-core XU316 that supports stable high-res audio playback in any mode*, allowing you more ways to immerse yourself in the world of high-quality hi-res music. * MQA Full Decoder for master-quality sound The BTR15 supports MQA Full Decoder, which means the MQA decoding can be achieved in any music app. This allows for high-resolution, master-level sound quality in reasonably sized files well-suited for your mobile device. Double-sided curved glass design With the BTR15, FIIO uses hot-bent curved glass for the first time – embedding it on both the front and the rear of the device. Not only does this make the device easier to hold, but it also gives the BTR15 a more attractive and 3D appearance. Together with the aluminium alloy middle frame, they make the BTR15 a comfortable device to handle – you won’t be able to put it down once you pick it up. Dual outputs gives you flexibility In addition to the standard 3.5mm single-ended headphone output, the BTR15 also comes with the widely-used 4.4mm balanced headphone output – featuring greater contact reliability and durability compared to the 2.5mm balanced out. The dual outputs ensure you can use the BTR15 with more headphones, for more remarkable listening experiences. Independent power supply for the amp, for more explosive power Electricity is the mother of sound. Feiao engineers have carefully designed an independent power supply system for DAC ES9219MQ built-in earmuffs, so that earmuffs no longer share the power supply with DAC and the power supply is purer. In addition, the uniquely designed external power supply has the characteristics of low noise and high current, which increases the balanced output power of BTR15 by 40% to 340mW, and can easily meet the needs of portable use. Parallel output, more power You don’t have to use the 4.4mm balanced output to enjoy the benefits of increased output power. In order to improve the performance of the BTR15 in every aspect, FIIO connected the headphone outputs in parallel to also greatly increase the output power of the 3.5mm...

SEE OFFER

Cayin RU6 USB DAC Headphone Amplifier (Box opened) 143.98 GBP Discrete 24-Bit R-2R Ladder Resistor Network Explained The basic idea of R-2R ladder is a matched pair of two resistors, the first is "R" and the other is "2R" which has twice the value of R. To achieve 24bit R-2R decoding, Cayin need 48 pieces of resistors (23xR and 25x2R) for one channel, or 96 pieces of high precision resistors for stereo. R-2R is famous for its natural and realistic sound signature, it'll offer a very different experience to music lovers. NOS or OS Dual DA Mode Non-Oversampling: Maintain the original sampling rate of the source bitstream. Digital filter-less, no post-processing, optimised in time domain, low phase distortion and jitter, no ringing artefact. Musical with vivid emotions, sounds natural, organic and coherent. Oversampling: Increases sampling rate (upsampling) through interpolation before DA. Enhances resolution, reduces noise and improves anti-aliasing, optimised in frequency domain. Impressive details and frequency extension, clean and sharp presentation with darker background. Discrete Volume Control R-2R DAC circuit is very demanding on incoming data integrity, the digital volume of mobile phones will damage sound quality badly. When off-the-shelf volume options cannot meet the high precision, low noise, low power consumption requirements of RU6, Cayin developed their own discrete resistor array volume control. 0-99 steps volume control through 9 segments of resistors and switching relays, meet all the RU6 requirements and transparent to maintain the natural sound signature of R-2R DAC. Intuitive and Versatile Hardware volume buttons for convenient control, doubled as menu selection when entering Mode settings. 1" OLED screen displays playback information with good visibility. 3.5mm and 4.4mm phono out to fit your earphone collection. Ultimate Dual Main Boards Layout To minimise interference, RU6 circuitry is split into TWO 6-layers PCB, with digital and analogue circuit installed in separate boards. Safeguard signal integrity, make sure the noise from reference clock and DSP will not bleed into the amplification circuit. Low Power Consumption Highly Compatible Discrete R-2R is a low-power DAC circuit when compared to other highly integrated DAC chipset on the market, minimising power drain from mobile sources. USB Audio with shielded USB-C connector, compatible with a wide range of mobile, consumer electronics and computers. RU6 is compatible with the following digital audio sources: iOS and iPadOS macOS computers Windows 7/8/8.1/10 computers * Android mobiles and tablets Digital Audio Players (Requires USB Audio Output support from the DAP) *Requires to install a proprietary USB Audio 2.0 Driver developed for RU6, free to download from Cayin’s official website. High Resolution and High Fidelity High-end digital audio compatibility. PCM: supports up to 384kHZ DSD: supports DSD64/128/256 Choice of High/Low gain to enhance performance with different IEM or portable friendly...

SEE OFFER

Cayin RU6 USB DAC Headphone Amplifier 193.98 GBP Discrete 24-Bit R-2R Ladder Resistor Network Explained The basic idea of R-2R ladder is a matched pair of two resistors, the first is "R" and the other is "2R" which has twice the value of R. To achieve 24bit R-2R decoding, Cayin need 48 pieces of resistors (23xR and 25x2R) for one channel, or 96 pieces of high precision resistors for stereo. R-2R is famous for its natural and realistic sound signature, it'll offer a very different experience to music lovers. NOS or OS Dual DA Mode Non-Oversampling: Maintain the original sampling rate of the source bitstream. Digital filter-less, no post-processing, optimised in time domain, low phase distortion and jitter, no ringing artefact. Musical with vivid emotions, sounds natural, organic and coherent. Oversampling: Increases sampling rate (upsampling) through interpolation before DA. Enhances resolution, reduces noise and improves anti-aliasing, optimised in frequency domain. Impressive details and frequency extension, clean and sharp presentation with darker background. Discrete Volume Control R-2R DAC circuit is very demanding on incoming data integrity, the digital volume of mobile phones will damage sound quality badly. When off-the-shelf volume options cannot meet the high precision, low noise, low power consumption requirements of RU6, Cayin developed their own discrete resistor array volume control. 0-99 steps volume control through 9 segments of resistors and switching relays, meet all the RU6 requirements and transparent to maintain the natural sound signature of R-2R DAC. Intuitive and Versatile Hardware volume buttons for convenient control, doubled as menu selection when entering Mode settings. 1" OLED screen displays playback information with good visibility. 3.5mm and 4.4mm phono out to fit your earphone collection. Ultimate Dual Main Boards Layout To minimise interference, RU6 circuitry is split into TWO 6-layers PCB, with digital and analogue circuit installed in separate boards. Safeguard signal integrity, make sure the noise from reference clock and DSP will not bleed into the amplification circuit. Low Power Consumption Highly Compatible Discrete R-2R is a low-power DAC circuit when compared to other highly integrated DAC chipset on the market, minimising power drain from mobile sources. USB Audio with shielded USB-C connector, compatible with a wide range of mobile, consumer electronics and computers. RU6 is compatible with the following digital audio sources: iOS and iPadOS macOS computers Windows 7/8/8.1/10 computers * Android mobiles and tablets Digital Audio Players (Requires USB Audio Output support from the DAP) *Requires to install a proprietary USB Audio 2.0 Driver developed for RU6, free to download from Cayin’s official website. High Resolution and High Fidelity High-end digital audio compatibility. PCM: supports up to 384kHZ DSD: supports DSD64/128/256 Choice of High/Low gain to enhance performance with different IEM or portable friendly...

SEE OFFER

FiiO JM21 Portable High Resolution Digital Audio Player 183.98 GBP FiiO welcomes the all-new JM21 portable Hi-Res Digital Audio Player. With an ultra-thin frame, the JM21 is among the thinnest Hi-Res audio players in the market today. It comes equipped with a Dual CS43198 high-performance 32-bit DAC architecture. FiiO has featured the latest octa-core Snapdragon 680 SoC chipset, promising smooth UI and multitasking support. With its fully balanced architecture featuring dual op-amps, the FiiO JM21 boasts a strong output of up to 700mW per channel. This sleek audio player packs a powerful sound in a compact and handy form factor. FiiO JM21 offers full-day music playback with a long-lasting battery life of up to 12.5 hours. Upgrade your portable audio experience with FiiO JM21! The Thinnest Hi-Res Audio Player Out There What makes the latest FiiO JM21 really special is its ultra-thin chassis and frame. It has a Sky-Blue contrast colour theme, which adds spectacular looks to its design. It is just 13mm thick and weighs only 156 grams. With its clean aesthetics, the FiiO JM21 is the perfect companion for everyday use. High-Performance Dual DAC Chipset FiiO JM21 brings the goodness of a premium dual-DAC setup housing two CS43198 high-performance 32-bit DAC chips. Paired with two independent SGM8262 OPAMPs, the dual DAC setup creates a fully balanced audio processing circuitry on the JM21. Powerful, Strong Output Characteristics FiiO JM21 packs powerful sound in an ultra-thin design. The player has a rated output of up to 700mW per channel through the balanced output port. With such powerful output, it pairs well with IEMs, Headphones, and Earbuds. For better pairing with different IEMs and Headphones, the FiiO JM21 features three gain levels which users can adjust easily. Shielded Power Supply Design In order to ensure high-quality audio signal processing, the Digital and Analogue sections on the JM21 have independent power supplies with separately shielded protection. The analogue and digital circuits are isolated from each other, resulting in pure sound reproduction. Eight-Core Snapdragon Processor and Open Android OS FiiO JM21 adopts the advanced eight-core Snapdragon 680 SoC chipset that offers a silky smooth UI with no noticeable lag for the users. Combined with the goodness of an open Android 13 OS, the player supports different streaming and media applications. Self-Developed DAPS Digital Audio Purification System FiiO JM21 features the brand’s self-developed DAPS(Digital Audio Purification System) design. This bypasses the Android SRC degradation for the audio signal, so whether you use the FiiO Music application, Apple Music or any other lossless media application, you will get the full benefit of the premium audio circuitry of JM21 and experience top-quality audio performance. It consists of a 5th-generation FPGA architecture with dual independent crystal oscillators for pure signal processing across different applications. Outstanding Battery Life Leave the battery anxiety at home whenever you bring...

SEE OFFER

FiiO BTR15 Bluetooth Headphone Amplifier 118.98 GBP Change modes with just one button Due to the BTR15’s ability to work as a Bluetooth receiver and as a USB DAC, we have implemented a PC/BT/PHONE mode button on it. With just a click of a button, you can quickly switch between the three different modes to match your current scenario for listening to high-quality music. Global parametric EQ, be the master of your music The BTR15 features a global parametric equalizer (PEQ). Through FIIO’s self-developed PEQ algorithm and user interface, in any mode* you can choose the exact frequencies to be adjusted along with their gain levels and bandwidth – allowing you to fine-tune the sound to exactly the way you want it. Dual-core upgrade, two modes of high-res audio The upgrades start from the heart of the BTR15, specifically the cores that power it. The BTR15 employs the high-performance combination of the Qualcomm QCC5125 Bluetooth chip = XMOS 16-core XU316 that supports stable high-res audio playback in any mode*, allowing you more ways to immerse yourself in the world of high-quality hi-res music. * MQA Full Decoder for master-quality sound The BTR15 supports MQA Full Decoder, which means the MQA decoding can be achieved in any music app. This allows for high-resolution, master-level sound quality in reasonably sized files well-suited for your mobile device. Double-sided curved glass design With the BTR15, FIIO uses hot-bent curved glass for the first time – embedding it on both the front and the rear of the device. Not only does this make the device easier to hold, but it also gives the BTR15 a more attractive and 3D appearance. Together with the aluminium alloy middle frame, they make the BTR15 a comfortable device to handle – you won’t be able to put it down once you pick it up. Dual outputs gives you flexibility In addition to the standard 3.5mm single-ended headphone output, the BTR15 also comes with the widely-used 4.4mm balanced headphone output – featuring greater contact reliability and durability compared to the 2.5mm balanced out. The dual outputs ensure you can use the BTR15 with more headphones, for more remarkable listening experiences. Independent power supply for the amp, for more explosive power Electricity is the mother of sound. Feiao engineers have carefully designed an independent power supply system for DAC ES9219MQ built-in earmuffs, so that earmuffs no longer share the power supply with DAC and the power supply is purer. In addition, the uniquely designed external power supply has the characteristics of low noise and high current, which increases the balanced output power of BTR15 by 40% to 340mW, and can easily meet the needs of portable use. Parallel output, more power You don’t have to use the 4.4mm balanced output to enjoy the benefits of increased output power. In order to improve the performance of the BTR15 in every aspect, FIIO connected the headphone outputs in parallel to also greatly increase the output power of the 3.5mm...

SEE OFFER

Shanling EH2 Desktop R2R DAC and Amplifier 372.99 GBP Compact R2R DAC with extra power! As the next step in the quest for the most natural sound, Shanling looked at some of its most legendary audio designes and recreated their sound with the new R2R DAC. 24 bit architecture with 192 high-precision 0.1% resistors, offering a unique sounding alternative to standard DAC designs. The EH2 features two independent audio circuits, headphone and pre/line ouputs. The headphone amplifier has increased driving power and is tuned for a beautifully rich and smooth sound. The pre/line output is a direct output from the R2R DAC combined with OPA1612 low-pass filters, fully preserving the authentic character of the R2R DAC. Digital Inputs - from basics to wireless As well as the standard USB input, the EH2 adds extra SPDIF coaxial and optical inputs, for easy connection to a wider range of classic A/V equipment. Bluetooth brings the convenience of a wireless connection, using the Qualcomm QCC5125 module with its brilliant support of LDAC, aptX Adaptive and AAC, providing a stable connection for all types of devices. Hardware level customisation With built in chipsets for tone control, the EH2 provides a direct solution for treble and bass adjustments. Quick and simple tuning changes provide you a sound better suited to your individual tastes. Designed for highly demanding headphones The EH2's high powered headphone amplifier was optimized for use with full size headphones, providing low distortion output reaching over 4W at 32 Ohms, making sure that even the hardest to drive headphones can be fully powered from this one compact device.

SEE OFFER

FiiO KA17 High End Dongle Amplifier with Dual ES9069 DACs 143.98 GBP Desktop mode, Taking it to the next level The desktop mode has been continually refined with the release of various products, such as the portable yet desktop-grade M17, Q7, M15S, Q15 and KA13. And now the perfected desktop mode has found its way to the KA17. The FIIO KA17 features a special desktop mode, activated using the dedicated D.Mode switch. Enable the desktop mode, and the KA17 will automatically adjust the DAC, amplifier power supply, and amplifier power output to fully unleash their potential with greater power output. Parallel output, Big boost in power With sufficient USB power supply input and desktop mode enabled, the KA17’s four THX headphone amps work together in parallel for greater current and overall power output. The result is up to 270mW+270mW power output for single-ended out, and up to 650mW+650mW power output for balanced out. Dual flagship ES9069Q DACs - Two cores power four ways The KA17 employs two of the new ESS ES9069Q flagship DACs, powered by fourth-gen 32-bit HyperStream technology. These chips feature even higher performance, lower power consumption, and less digital noise than previous generations for an absolutely pristine and pure audio background. Ten-level highly precise PEQ - An ace up its sleeve The XMOS XU316 chip allowed FIIO engineers to develop a highly precise adjustable PEQ*, with 10 customizable frequency bands. FIIO’s self-developed PEQ algorithm and interface allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band, letting you dial in the sound exactly the way you want it. *PEQ adjustment is supported in formats up to PCM 192kHz/24bit. *PEQ is currently not supported in UAC1.0 mode. Outstanding performance - Audiophile-grade 16-core XMOS XU316 Handling USB duties in the KA17 is the 16-core XMOS XU316, rarely found in audio dongles. This chip features lower latency, more stable signal transmission, and better compatibility than typically used USB control chip. And when paired with dual crystal oscillators, the KA17 is more than capable of handling various digital audio sources with various sampling rates. All-new THX AAA 78+ headphone amp design - Compact and elegant The THX AAA 78 headphone amp proved itself in the mid-to-high-end M11 Pro and M11 Plus players. Now, the even newer and upgraded THX AA 78+ features in the KA17. Inside the KA17 are THX AAA 78+ headphone amplifiers, with 8 op-amps working in parallel in a 4-channel fully balanced configuration, allowing for not only greater power output but also more detailed and realistic sound. Comparable to DAPs - Multistage HiFi audio circuit FIIO engineers were cleverly able to adapt the audio circuit designs of mid to high-end digital audio players to the compact KA17. With its high-precision handling of digital audio signals, thanks to the dual crystal oscillator clocks and high-performance DAC converted to analogue signals output by a robust analogue section consisting of LPF voltage amplification, BUF current...

SEE OFFER

FiiO Jade Audio JA11 Dongle DAC and Headphone Amp 13.98 GBP FiiO JA11 is a very affordable device that is highly capable – supporting a multitude of high-resolution formats and featuring a customizable PEQ, it achieves an excellent sound quality that goes wherever you go. It’s an impressively capable decoder that supports up to PCM 384kHz/32bit and even DSD128, almost unheard of in its price class. Customizable PEQ With a built-in professional DSP, the ability to set custom PEQ curves, and even access to PEQ curves recommended and shared by others, you can have fun dialling in the sound exactly the way you want it. Take calls and record audio With support for microphone input*, and CTIA/OMTP inline controls, this device is capable of making calls, recording audio, and even singing karaoke. *Some phones may not support microphone input due to operating system limitations. Light and compact While it features a compact and elegant design, inside is a meticulously designed circuit that restores true HiFi sound to your 3.5mm jack headphones. Cool metallic texture The aluminium-magnesium alloy construction goes through a secondary anodizing process for an uncompromisingly luxurious feel and meticulous craftsmanship. The alloy body doesn’t just look good, it is also anti-interference. Supports app control Connect to the FiiO Control APP* to get access to even more functionality, including support for presets, sharing and downloading PEQ curves, UAC version switching, more granular volume adjustment, and more. *The JA11 can only be controlled by the Android version of the FIIO Control APP Comparable with various operating systems and devices As the JA11 is compatible with Android/iOS/Windows/MAC computers and phones it means you can easily listen to high-fidelity music. High-quality wiring Inside the cable are high-purity oxygen-free palladium-plated copper wires, which are low impedance and anti-interference making them capable of stably transmitting audio signals. The cable itself features a dual-layer sheath made of flexible silicone and braided yarn, making it soft yet durable.

SEE OFFER

FiiO K9 Desktop Headphone Amp/DAC - AKM Edition 503.98 GBP AKM flagship DAC combo AK4191EQ + AK4499EX The K9 AKM applies AKM's brand-new flagship DAC combo - AK4191EQ + AK4499EX. Based on the new design technology of totally separated digital and analogue sections, the DAC combo even incorporates the newly developed "DWA ROUTING technology" to improve the Signal to Noise Ratio and reduce noise from varieties of amplitude. The result is more realistic, detailed and natural sound transmission, as if you were there with the performing artists. Refreshingly capable high-end amplifier The FiiO K9 AMK’s ace up its sleeve is the THX AAA 788+amplifier, giving it an extraordinary 1% undistorted power output up to 780mW at 300Ω and up to 2000mW at 32Ω. No matter if you use low-impedance or high-impedance headphones, the K9 AKM will drive it with aplomb. Multiple LDOs in multiple stages, truly stable power The power stabilization and filtering within the audio circuit play a big part in ensuring excellent sound quality. Each stage of the audio circuit employs ultra-low-noise LDOs for voltage regulation. Isolated digital and analogue section power supply, for purer sound The digital and analogue portions of the K9 receive power separately to reduce interference between the two audio circuits, for pure and faithful reproduction of your music. Electricity is the Robust power supply, ample power The linear transformer is paired with 4 massive 4700uF capacitors to provide clean continuous power Dual-mode clock management, even more improvement to the sound Accurate and stable dual-mode clock management allows the K9 AKM to easily play back high-resolution audio with the greatest fidelity as if you were there with the performing artists. High-res Bluetooth for all of your audiovisual needs The K9 AKM employs the QCC5124 Bluetooth chip with support for LDAC/aptX HD/aptX Adaptive and other high-res Bluetooth codecs. With the K9 AKM, you can listen to music, watch videos, and play video games with high quality and low latency. Bluetooth 5.1 with support for LDAC/atpX Adaptive/aptX HD/aptX/aptX LL/AAC/SBC Compatible with UAC1.0/UAC2.0 – Highly adaptable The K9 AKM supports both UAC1.0 and UAC2.0 modes, allowing you to use the K9 AKM with either devices that are simply plug-and-play or with devices that can work with the K9 AKM with an additional driver for even better compatibility. And the FiiO Control App allows you to easily switch between UAC1.0 and UAC2.0 modes. Horizontal or vertical The K9 AKM adopts the well-received design language of other FiiO desktop units, and features an all-aluminium construction made from an integrated streaming + CNC process to ensure the body’s strength and precise finish. And with the vertical stand, the K9 AKM can be used either vertically or horizontally, allowing it to become a versatile part of your desktop setup. Volume knob with a weighty feel and convenient RGB light information The iconic, weighty FiiO volume knob is powered by ADC curve...

SEE OFFER

FiiO K9 Desktop Headphone Amp/DAC - Standard Edition (Box opened) 378.98 GBP High-performance dual cores for soul-shaking sound Two ES9068AS DACs handle the left and right channels and make up the high-quality "core" of the K9. Listen to your favourite playlist and be instantly immersed in the music. High-end amplifier - Refreshingly capable The FiiO K9's ace up its sleeve is the THX AAA 788+ amplifier, giving it an extraordinary 1% undistorted power output up to 780mW at 3000 and up to 2000mW at 320. No matter if you use low-impedance or high-impedance headphones, the K9, will drive it with aplomb. Partitioned design for max performance of each section The PCB of the K9 features a partitioned layout, fully separating the major sections of the audio circuit - the power supply, signals, and analogue signal loop. This guarantees the integrity of the audio signal being processed. Six-stage audio circuit faithfully reproducing sound The desktop-grade six-stage audio circuit was meticulously designed to ensure a pure, delicate yet rich sound. (IV conversion), LPF filter, digital volume adjustment, buffer amplifier, pre-amplifier, and post-stage drive. Multiple LDOs in multiple stages, truly stable power The power stabilization and filtering within the audio circuit play a big part in ensuring excellent sound quality. Each stage of the audio circuit employs ultra-low-noise LDOs for voltage regulation. Isolated digital and analogue section power supply, for purer sound The digital and analogue portions of the K9 receive power separately to reduce interference between the two audio circuits, for pure and faithful reproduction of your music. Electricity is the Robust power supply, ample power The linear transformer is paired with 4 massive 4700uF capacitors to provide clean continuous power Dual-mode clock management, even more improvement to the sound Accurate and stable dual-mode clock management allows the K9 to easily play back high-resolution audio with the greatest fidelity as if you were there with the performing artists. Compatible with UAC 1.0 / UAC2.0 - highly adaptable The K9 supports both UAC1.0 and UAC2.0 modes, allowing you to use the K9 with either device that is simply plug-and-play or with devices that can work with the K9 with an additional driver for even better compatibility. And the FiiO Control App allows you to easily switch between UAC1.0 and UAC2.0 modes. *UAC1.0 for PS5 and other device support. High-res Bluetooth for all of your audio-visual needs The K9 employs the QCC5124 Bluetooth chip with support for LDAC/aptX Adaptive/aptX/aptX HD aptX LL/AAC/SBC high-res Bluetooth formats. With the K9, you can listen to music, watch videos, and play video games with high quality and low latency. Additional Bluetooth functionalities You can connect the K9 to your phone via Bluetooth, and with the addition of the FiiO Control app you get access to even more functionalities. Adjust various settings such as filters, status indicators, EQ and channel balance to exactly your liking. There are 7 preset...

SEE OFFER

FiiO KA13 Portable Dual DAC AMP with 3.5mm/4.4mm Outputs BLACK (Box opened) 53.98 GBP The new desktop mode now available on portable dongles From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance. Dual cores, a golden combo With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13. Mini desktop amp with big performance The KA13 features a desktop mode, which the engraved lightning bolt logo hints at. In desktop mode, balanced output power goes up to 550mW, allowing the KA13 to drive both low and high-impedance headphones with excellent dynamics and detail. High-res decoding with higher detail With support for 32bit/384kHz PCM and DSD256, the KA13 despite its tiny size is capable of highly-detailed sound. Hear the details and get a better look into your music. Dual outputs for your convenience The KA13 not only manages to fit a 3.5mm single-ended headphone out, it also manages to pack a 4.4mm balanced headphone out. FiiO engineers repeatedly adjusted the design of the KA13 and finally managed to fit two headphone outputs in the compact dongle, marking true progress in packaging capabilities. Detachable adapter cables for compatibility with multiple platforms The KA13 features a detachable cable design. When combined with the included Type-C and Lightning adapter cables, you can listen with various systems without having to immediately purchase another cable. (RGB light) Control all functions via FiiO Control app The KA13 supports being controlled with the FIIO Control app. With the app, you can set the RGB lights, SPDIF output, audio filters, etc. for a more convenient experience. Only available on Android devices. Stylish design The front of the CNC metal body features unique lines, while the rear contains exquisite texture, for an aggressive yet futuristic look. The KA13 is also soft to the touch, for greater comfort every time you use it.

SEE OFFER

Fuji XF 18mm f2 R Wide Angle Pancake Lens- Camera & Optic Accessories~~Camera & Optic Lenses~~Camera Lenses 549 GBP For a variety of subjects including landscape, architecture, interiors, travel and low-light, consider the excellent Fujifilm XF 18mm F2 R wide angle pancake lens with superb compact construction.

SEE OFFER

FiiO FW3 Wireless In Ear Earphones 103.98 GBP Let’s take your Hi-Res audio experience truly wireless with the all-new FiiO FW3. FW3 is a fully integrated HiFi TWS designed with a built-in DAC& architecture. The FW3 features a high-performance AK4332 DAC and Qualcomm’s latest QCC5141 Bluetooth chipset. You get full Bluetooth V5.2 connectivity with high-resolution LHDC, AptX Adaptive, AptX, etc codec support. FiiO has also equipped the FW3 with a 10-band PEQ function allowing the users to tune the output more to their liking. By default, FiiO has tuned the FW3 for pure high-resolution audio clarity. With a battery life of up to 21 hours, you can enjoy HiFi music for extended hours with a single charge! Fully-Integrated HiFi TWS Earphones The market of TWS is huge, what makes FiiO FW3 stand out from the crowd is actually the professional core audio architecture that benefits the listeners with clear high-resolution sound. The pair comes with a built-in AK4332 DAC and AMP chipset for clear signal decoding and pure high-resolution experience. Qualcomm’s QCC5141 DAC Chipset In order to provide high-speed low-latency Bluetooth connectivity, FiiO has equipped the FW3 with Qualcomm’s latest QCC5141 Bluetooth chip bringing in full Bluetooth V5.2 connection support. FW3 features leading high-resolution Bluetooth codecs including LHDC, AptX Adaptive, AptX, etc. LHDC format enables smooth streaming of signals with up to 24Bit/96kHz. FW3 is also Snapdragon Sound certified, ensuring good sound quality. High-Resolution Sound with 10mm Professional Dynamic Driver Unit Over the years, FiiO has gained expertise in designing premium-quality IEMs and audio accessories. With that experience, they have designed the FW3 for a pure high-resolution audio experience. It comes featuring a 10mm carbon-based dynamic driver unit. It promises top-quality audio performance with deep-hitting bass response, clear midrange, and nice & detailed treble response. Specially-Tuned For True Hi-Res Experience FiiO has professionally adjusted the tuning of the FW3 TWS earphones for a pure hi-res audio experience. The clarity, the punch, and the overall signature of the FW3 is way above the competition and the resulting sound is truly high-resolution! 10-Band PEQ Settings FiiO FW3 features 10-band Parametric EQ settings. It allows the users to easily adjust the output more to their liking and preferences. 10-band EQ allows for precise EQ adjustments with desired frequency bands. Game-Ready Low-Latency Performance The FW3 supports low-latency gaming mode, which is available by enabling the FiiO music App. The gaming mode significantly lowers the transmission latency to less than 100ms, quickly responds to every action in the game, and instantly locks on the location of the target. In addition, thanks to the Bluetooth transmission with ultra-low latency, the FW3 helps to catch almost every detail when watching fast-paced films, allowing you to be totally immersed in the film. Incredible Battery Life FiiO...

SEE OFFER

FiiO M11S Digital Audio Player (Box opened) 393.98 GBP OFFER: Buy any FiiO DAP (M11S, M11 Plus, M15S, M17, R7) and SAVE £50 when you purchase FiiO's SP3 Speakers in the same basket using voucher code SP3SAVE M11S adopts the high-performance model "ES9038Q2M" of the DAC chip for portable made by ESS Technology. As a result, the M11S supports playback of PCM384kHz and DSD256 (up to DSD128 during USB input DoP playback). In addition, it has a dual configuration with one "ES9038Q2M" installed in each of the left and right audio channels and uses all the capabilities of the DAC chip that can originally reproduce the left and right channels with only one channel. Combined with FiiO's new-generation amplifier circuit it provides a pure audio experience unique to a player created for music playback while having extremely high output. Digital Audio Purification System - that makes full use of 4th generation FPGA + femtosecond clock crystal oscillator The M11S uses the same FPGA-based digital domain signal processing circuit + femtosecond clock crystal oscillator as the high-end model M11 Plus ESS, "Digital Audio Purification System (DAPS)". The digital data sent from the SoC goes through FiiO's proprietary 4th generation FPGA equipped with FiiO's unique PLL technology, and is precisely processed as a digital audio signal within the FPGA so that the DAC can easily demonstrate its true value. . Two ultra-low jitter femtosecond clock crystal oscillators for 44.1 kHz and 48 kHz built into DAPS provide a highly accurate and low-jitter master clock for the entire digital audio circuit, resulting in clean and extremely high performance. Realizes D/A conversion with high fidelity. Powerful drive power of 670mW (at 32Ω, balanced output) and low noise suitable for the latest generation The M11S is equipped with a new-generation headphone amplifier circuit newly developed by FiiO, making full use of the experience cultivated through cooperation between FiiO and THX. It demonstrates a powerful drive power of 670mW (at 32Ω, balanced output) that exceeds its class, and achieves one of the lowest noise floors of all DAP products of 1.9uV. Achieved 62% noise reduction compared to conventional models. Even when paired with a highly sensitive IEM, the detailed sound that rises from silence brings out the beauty of music that is unique to a player created for music playback. Separate design power supply circuit that achieves low noise, high stability, and high durability The power supply circuit of the M11S has independent power supplies for the left and right DAC chips, the I/V conversion section, the pre-stage low-pass filter section, and the amplification expansion circuit. By providing optimal and powerful power supply to each of the important sections related to sound quality, the true value of each component can be demonstrated, and the dynamics of music can be reproduced at a higher level. Smooth operation with Qualcomm 8-core SoC "Snapdragon 660"...

SEE OFFER

HiFiMAN Goldenwave Serenade DAC and Headphone Amplifier 902.99 GBP Hymalaya Pro – Equivalent to two PCM1704K balanced connections Hymalaya Pro R2R DAC, with the added support of a new FPGA algorithm and 0.01% precision resistors, adds up to a performance that suppresses the PCM1704 in every way, reaching the THD (Total Harmonic Distortion) rate of -6 dB 0.0012%. Lossless Playback - Supports multiple music playback applications Serenade uses the legendary FET operational amplifier, with a discrete component LPF analogue circuit that translates into detailed sound with high-precision, low-noise test indicators. The bold design of the whole signal path eliminates coupling capacitors, removing nonlinear distortion caused by electrolytic capacitors, and leaving only pure, full-range sonic output. Transformer is the foundation of full-range sound The 50w toroidal transformer is comprised of a high-quality full-band iron core, combined with a large pond filter capacitor of nearly 30,000 microfarads and a multi-stage, multi-channel, low-noise, high-speed voltage regulator circuit, providing a pure and fast power supply for the SERENADE. Class A headphone Amplifier Circuit The SERENADE amp circuit is based on a Class A design, supplemented by a precisely matched, fully discrete transistor amplifier circuit so that the amp circuit inherits the noble tone of the more expensive Prelude Amp.

SEE OFFER

FiiO KA13 Portable Dual DAC AMP with 3.5mm/4.4mm Outputs 73.98 GBP The new desktop mode now available on portable dongles From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance. Dual cores, a golden combo With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13. Mini desktop amp with big performance The KA13 features a desktop mode, which the engraved lightning bolt logo hints at. In desktop mode, balanced output power goes up to 550mW, allowing the KA13 to drive both low and high-impedance headphones with excellent dynamics and detail. High-res decoding with higher detail With support for 32bit/384kHz PCM and DSD256, the KA13 despite its tiny size is capable of highly-detailed sound. Hear the details and get a better look into your music. Dual outputs for your convenience The KA13 not only manages to fit a 3.5mm single-ended headphone out, it also manages to pack a 4.4mm balanced headphone out. FiiO engineers repeatedly adjusted the design of the KA13 and finally managed to fit two headphone outputs in the compact dongle, marking true progress in packaging capabilities. Detachable adapter cables for compatibility with multiple platforms The KA13 features a detachable cable design. When combined with the included Type-C and Lightning adapter cables, you can listen with various systems without having to immediately purchase another cable. (RGB light) Control all functions via FiiO Control app The KA13 supports being controlled with the FIIO Control app. With the app, you can set the RGB lights, SPDIF output, audio filters, etc. for a more convenient experience. Only available on Android devices. Stylish design The front of the CNC metal body features unique lines, while the rear contains exquisite texture, for an aggressive yet futuristic look. The KA13 is also soft to the touch, for greater comfort every time you use it.

SEE OFFER

Cayin RU7 USB DAC Headphone Amplifier 252.99 GBP Fully Balanced Resistor Networks - Discrete 1-Bit DAC for DSD Format Purposively designed micro-miniaturized 1-Bit DAC circuit from discrete components Convert digital signal to analogue signal through a fully differentiated 4-ch DAC architecture The 1-Bit DAC circuit is a resistor network composed of 128 pcs (4 x 32) high-precision Thin Film Resistors, this closely resembles to the discrete DAC of N7 DAP The output of the resistor network will go through a 3-level active LPF and then be converted to a single-ended signal for volume adjustment. High Power Parallel Phone Amplifier Dual amplifiers in parallel, providing 4-CH high power Balanced Driven output The second phone amplifier is a parallel unity gain inverting phase amplifier An impressive upgrade in phone output power: 3.5mm SE, 160mW @32Ω 4.4mm BAL, 400mW @32Ω Shared Line Out Conveniently Connected The shared line out function will configure the 3.5mm or 4.4mm phone output into fixed voltage output (bypassing volume control): 3.5mm Single-ended, 1.2Vrms 4.4mm Balanced, 2.4Vrms The line out voltage is carefully selected to retain as much detail and dynamic of the 1-Bit DAC with minimum noise and distortion. Enable you to connect the RU7 to a portable/desktop amplifier or home audio system and used it as a miniature 1-Bit DAC Discrete Volume Control Discrete Resistor Network DAC circuit is very demanding on incoming data integrity, Cayin recommends users to keep the digital volume of their mobile phone at full output to safeguard the quality of the audio digital signal. When off-the-shelf analogue volume options could not meet the high-precision, low noise, low power consumption requirement of RU7, Cayin developed their own discrete resistor network volume control 100 steps volume control through 3 segments of resistors and switching relays, offer precise control over a wide volume range, satisfy even the need of most sensitive IEM users Outstanding Digital Audio Capability with User Selectable All-to-DSD RU7 supports PCM up to 384kHz and native DSD from DSD64 to DSD256 Its Audio Bridge will receive different audio formats and go through high-precision signal enhancement All digital audio signals will convert to the designated DSD format (DSD64/DSD128/DSD256) before feeding to the discrete 1-BIT DAC circuit. Dual PCB to Minimise Interference To minimize interference, RU7 circuitry is split into TWO 6-layerrs PCB, with digital and analogue circuit installed in separate boards. Safeguard signal integrity makes sure the noise from the reference clock and DSP will not bleed into the amplification circuit. Low Power Consumption, Compatible with Common Platforms The discrete resistor network is a low-power DAC circuit when compared to other highly integrated DAC chipsets, with minimised power drain from a mobile source. Redesigned amplification circuit increase output power dramatically while maintaining the overall power drain at 100-110 mA Low power consumption allows RU7...

SEE OFFER

AWD-IT M100R Mesh Ryzen 5 4500 Six Core Nvidia GeForce RTX 3050 8GB Gaming PC 499.99 GBP Introducing the AWD-IT 205M Mesh Gaming PC – compact yet powerful!Designed for gamers who crave performance without sacrificing space. Powered by the Nvidia GeForce RTX 3050 with Ray tracing and DLSS 2 plus Ryzen 5 4500, with 6 cores, 12 threads, a 4.1 GHz boost clock and Gigabyte A520 motherboard partnership - this PC delivers impressive gaming performance in a sleek, space-saving design.Whether you're exploring virtual worlds or enjoying casual gaming sessions, the AWD-IT 205M Mesh Gaming PC is the perfect fit. Upgrade your gaming experience with this compact powerhouse today.

SEE OFFER

FiiO R7 Desktop Streaming Player and DAC/Amp 652.99 GBP OFFER: Buy any FiiO DAP (M11S, M11 Plus, M15S, M17, R7) and SAVE £50 when you purchase FiiO's SP3 Speakers in the same basket using voucher code SP3SAVE FiiO R7 is the brand’s first-ever desktop digital audio player equipped with a high-performance ESS Sabre DAC chipset and high-power THX-788+ desktop-grade amplification chipset. It brings you the perfect combination of input and output options allowing you to use it independently or use it with other devices on your desktop chain. FiiO R7 supports high-resolution PCM and native DSD audio signal decoding. With Qualcomm’s 8-core Snapdragon 660 SoC chipset and 4 GB of RAM, R7 boasts open Android 10 OS with support for countless streaming and media applications! FiiO’s First-Ever Desktop Audio Player FiiO is a pioneer brand in the HiFi audio industry. They are known for their outstanding range of products full of innovations and features. They have years of expertise in designing portable and desktop audio gear. With all that experience, they have revealed the R7, their first-ever desktop digital audio player. Premium Sabre DAC Chipset FiiO R7 comes equipped with a premium ES9068AS Sabre DAC Chipset. It provides high-resolution PCM(up to 32-Bit/768kHz), DSD(native DSD256), and MQA audio signals that too with outstandingly clean performance reaching ultra-low noise and high SNR ratings. The output is clean with a dark noise-free background. High-Power Desktop-Grade THX Amplification Circuit FiiO R7 features a specially designed high-power desktop-grade THX amplification circuit. It features dual THX AAA 788+ headphone chips on the amplification circuit. It produces high-power output delivering up to 3000mW of clean power. FiiO has designed R7 with five-level gain modes to ensure good pairing with both sensitive IEMs as well as high-power requiring headphones. A plethora of Input/Output Options FiiO R7 houses a full plethora of input and output options for the users. It provides SD card, USB-C, USB-A, Coaxial, and Optical input options. As for output, the R7 supports XLR, Dual RCA, Coaxial, and Optical line-out options. It also supports 4-pin XLR, 4.4mm balanced, and 6.35mm single-ended headphone outputs. Qualcomm’s Advanced 8-Core SoC Chipset FiiO R7 boasts lag-free operation with an advanced 8-core Qualcomm Snapdragon 660 SoC chipset. It is paired with 4 GB RAM and 64GB Storage capacity. The player is loaded with open Android 10 OS bringing in support for countless applications. 5 gain levels, 3.6W high output power FiiO R7 has five gain levels: low / medium / high / over-ear headphones / enhanced over-ear headphone mode. Under a 32Ω load using enhanced over-ear headphone mode, the R7 is capable of outputting up to 3.6W, more than enough to power low-and high-impedance headphones. Convenient and intuitive The FiiO R7 is a unit that is easy to use and offers an astounding number of ways to listen. When listening to music streaming apps, easily switch between...

SEE OFFER

FIIO K13 Compact Desktop R2R architecture DAC and Headphone Amplifier

Comparison of similar products