Review Energizer universal battery charger

Energizer Universal Battery Charger 629874 25.9 GBP This Energizer Universal battery charger only takes between 3 and 5 hours to charge most rechargeable batteries, making this charger quick and convenient. Only rechargeable 9V batteries take longer, charging in around 12 hours. Despite its compact appearance, this Energizer Universal battery charger is able to charge 2 or 4 x AA, 2 or 4 x AAA, 2 or 4 x C, 2 or 4 x D or 2 x 9V rechargeable batteries making it a necessity for any battery user. Approximate charging times:- AA 1300mAh 2 Hours AA 1700mAh 3 Hours AA 2000mAh 4 Hours AA 2450mAh 4.5 Hours AAA 700mAh 2 Hours AAA 850mAh 3 Hours AAA 1000mAh 3.5 Hours C 2500mAh 4.5 Hours D 2500mAh 4.5 Hours 9V 175mAh 12.5 Hours.

SEE OFFER

DCB546 18v / 54v xr Flexvolt 6.0ah Battery + DCB116 Fast Charger - Dewalt 134.99 GBP Dewalt DCB546 FLEXVOLT Battery XR technology fully convertible 18/54v DeWALT Battery backwards compatible with existing 18v DEWALT products, yet with the option to amplify voltage to an unprecedented 54v X 6Ah great for use on larger more powerful construction power tools. Compared with 240v and 110v power tools even the most efficient cordless system provided a compromise between increased portability and reduced power, between greater ease-of-use and reduced run-time. DEWALT have recognised the frustrations these limitations cause the trade and engineered the DEWALT XR FLEXVOLT system to eliminate any and all restrictions, providing a 54v/18v cordless system that offers zero compromises. DEWALT XR FLEXVOLT DCB546 Batteries have the dual advantage of unbeatable run-time in all existing 18v DEWALT Power Tools as well as the power necessary to access applications completely unheard of for cordless technology. With this innovation DEWALT have finally unlocked the full potential of

SEE OFFER

DeWalt DCS391 18v XR Cordless Circular Saw 165mm No Batteries No Battery Charger No Case 125.9 GBP By constantly monitoring tool and battery operation, the intelligent switch module maximizes performance and prevents damage caused by overload or temperature build-up. This technology, combined with a tough outer casing and superb ergonomics means that XR Lithium-ion is truly "Tough on the outside and Intelligent on the inside". It is part of the intelligent XR Li-Ion Series, designed for efficiency and for making applications faster. The saw has a powerful and highly efficient PM58 DeWalt fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast-cutting action. It has an extremely durable tool design, including a cast magnesium base, which allows repetitive, accurate cuts. Features and Benefits • Part of the intelligent XR Lithium-Ion Series designed for efficiency and making applications faster • PM58 fan cooled motor with replaceable brushes delivers up to 3700 rpm for fast cutting action • Ergonomic handle set with rubber overmold to optimise end user comfort • Extremely durable tool design, including a cast magnesium base for repetitive, accurate cuts • Intelligent trigger allowing total control over all applications • Keyless bevel angle and depth of cut adjustment with easy-to-read scale • Spindle lock for quick and easy blade change • Lock off switch and electronic motor brake for additional control and work safety • Improved ergonomic design and rubber grip increase comfort Specifications • Voltage: 18v • Power Output: 460w • No Load Speed: 3700rpm • Bevel Capacity: 50° • Max. Depth of Cut at 90°: 55mm • Max. Depth of Cut at 45°: 42.1mm • Weight: 3.8kg Contents • DeWalt DCS391 18v XR Cordless Circular Saw 165mm • No Batteries • No Charger • No Case

SEE OFFER

DeWalt DCS331 18v XR Cordless Jigsaw No Batteries No Battery Charger No Case 135.9 GBP The DeWalt XR Lithium-ion cordless range offers extreme run time, increased efficiency and improved performance. By constantly monitoring tool and battery operation, the intelligent switch module maximizes performance and prevents damage caused by overload or temperature build-up. This technology, combined with a tough outer casing and superb ergonomics means that XR Lithium-ion is truly "Tough on the outside & Intelligent on the inside". Features & Benefits • Powerful & efficient PM47 fan cooled motor with replaceable brushes • Delivers fast cutting action up to 3000 strokes per minute • Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety • Tool-free adjustable shoe with anti-scratch cover bevels 45 degrees in both directions • Quick and easy patented keyless blade change system, accepts T-shank blades • Patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation • 3-position pendulum action controls the aggressiveness or smoothness of cuts • Dust blower keeps line of cut clear of dust and debris • Modular component design for trouble free servicing • Rubber coated grip to reduce surface vibration and user fatigue • Improved ergonomic design Specifications • Battery Voltage: 18v • Power Output: 400 Watts • No Load Stroke Rate: 0-3000spm • Stroke Length: 26mm • Bevel Capacity: 45° • Max. Depth of Cut [Wood]: 135mm • Max. Depth of Cut [Metal]: 10mm • Weight: 3.1 kg Contents • DeWalt DCS331 18v XR Cordless Jigsaw • No Batteries • No Charger • No Case • Anti-Scratch Shoe Cover • Dust Port

SEE OFFER

DeWalt DCB118 54v and 18v XR Cordless FLEXVOLT Li-ion Fast Battery Charger 240v 75.9 GBP Dewalts DCB118 Fast Charger is a fan cooled charger that is compatible with 18v XR Batteries and the new 18v/54v FLEXVOLT Battery. Features & Benefits • Compatible with all 18v XR and 54v FLEXVOLT DeWalt Batteries • An internal fan pulls air across battery to cool and reduce hot/cold pack delays • This fan assisted cooling results in faster charge times. • Charges a DCB546 6.0Ah FLEXVOLT battery in approximately 60 minutes Specifications • Battery Compatibility: 18v XR / 18v/54v FLEXVOLT • Charge Time (approx.): 30 mins (DCB183 / 2.0Ah) • Charge Time (approx.): 40 mins (DCB182 / 4.0Ah) • Charge Time (approx.): 50 mins (DCB184 / 5.0Ah) • Charge Time (approx.): 60 mins (DCB546 / 6.0Ah)

SEE OFFER

Makita DPB182 18v LXT Cordless Bandsaw No Batteries No Battery Charger No Case 277.9 GBP Compatible with all Makita 18v LXT lithium ion batteries, the DPB182 is a compact cordless portable band saw. The design allows for excellent manoeuvrability in horizontal and overhead applications. Features & Benefits • Stable cutting with highly rigid aluminium structure • Easy blade track adjustment simply by turning the screw • Ideal for cutting conduit, copper pipe, threaded rod, angle iron and channel • Compact and lightweight design • Tool-less blade change • Easy to Grip handle with anti-slip elastomer surface • LED job light • Wheel cover encloses the blade outside the cutting area making the saw suitable for one-handed operation Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Capacity (Round Pipe): 64 mm • Capacity (Square Pipe): 64x64 mm • Blade Length: 835 mm • Blade Width: 13 mm • Noise sound pressure: 79 dB(A) • Noise K factor: 3 dB(A) • Blade Speed: 0 - 3.2 m/sec • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 3.8 - 4.1 kg Contents • DPB182Z 18v Cordless Bandsaw (bare tool) • No Battery • No Charger • No Case

SEE OFFER

DeWalt DCD240 54v XR Cordless Brushless FLEXVOLT Paddle Mixer No Batteries No Battery Charger No Case 277.9 GBP Designed for users such as plasterers, tilers, landscapers, flooring contractors and general builders, the DeWalt DCD240 is a Flexvolt paddle mixer, making it one of the only cordless mixing drills on the market. The high power Flexvolt battery system provides the DCD240 with equivalent performance to a 1.8kW corded tool, and means mixing applications can be carried out on site without need for a power supply. The DCD240 uses an M14 accessory connector, enabling it to be used with standard mixing paddles, one of which is supplied with the tool. It has an adjustable 5 position speed dial which enables the machine to be run at 300, 450, 550, 650 or 725 RPM. When changing speeds the motor ramps up or down slowly to enable the operator to maintain sufficient control and prevent splashes. The DCD240 also has a lock of switch which helps to prevent accidental starting, e.g when changing the battery. Specifications • Battery Voltage: 54v • Battery Type: DeWalt XR Flexvolt • Speed Settings: 5 • Speed Min / Max: 300 / 725 RPM • Accessory Connector: M14 Features & Benefits • 54V Brushless motor (equivalent to 1800w corded machine) • Includes 160mm spiral paddle • Adjustable 5 position speed dial • Ergonomic handle for reduced fatigue • Single speed all metal mechanical transmission • Electronic Variable Speed (0-725 RPM) with 5 second ramp up / down • M14 threaded connector for standard accessories • Safety lock off switch for avoiding accidental starts, e.g when changing battery Contents • DCD240 54v Cordless Mixing Drill • Spiral Paddle Mixer (160mm) • No Battery • No Charger • No Case

SEE OFFER

Bosch - 36v Li-Ion Battery Charger AL3620CV Home & Garden 36v-20 F016800436 44.99 GBP Convenient compatibility – charge all 36V Power For All batteries Compatible with all 36V batteries Integrated battery LEDs show charging status 2.0Ah battery fully charged in 65 mins Power up and get it done Super compact charger with excellent manageability

SEE OFFER

Makita DC18RD 18v LXT Twin Port Battery Charger 240v 119.9 GBP DC18RD is a two port fast charger capable of charging two Makita slide style Lithium Ion Batteries (or Ni-MH batteries in conjunction with an adapter) at the same time. Both batteries will be charged fully in the same amount of the time as the DC18RC fast charger takes to charge a single battery. The DC18RD is also equipped with a USB port for charging USB devices.SpecificationsCharge Times:2 x 18v 3.0ah Batteries: 22 mins2 x 18v 4.0ah Batteries: 36 mins2 x 18v 5.0ah Batteries: 45 minsBattery voltage range: 14.4v - 18vBattery type: Li-Ion (or Ni-MH in conjunction with an adapter)

SEE OFFER

Makita DSS611 18v LXT Cordless Circular Saw 165mm No Batteries No Battery Charger No Case 120.9 GBP The DSS611 has been developed as a cost competitive sister tool to the model DDS610. Featuring the same lightweight design, portability and high performance, the DDS611 has dispensed with the LED worklight, positive 45° stop, blower function and electric brake found on its more expensive sibling. As a result, the DSS611 is an ideal tool for users who need a basic, professional quality cordless circular saw. Specifications • Battery Type: Lithium-ion • Battery Voltage: 18v • Depth of Cut @ 90°: 57 mm • Blade Diameter: 165mm • Depth of Cut @ 45º: 40mm • Depth of Cut @ 50°: 36mm • Bore Diameter: 20mm • Noise sound pressure: 91 dB(A) • Noise sound power: 102 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 3700 rpm • Vibration K factor: 1.5 m/sec² • Vibration: Cutting Chipboard: 2.5 m/sec² • Net weight: 3.3 kg Features and Benefits • Double safety trigger • High comfort grips • Removable dust nozzle Contents • DSS611Z 18v Cordless Circular Saw • Hex wrench • Rip fence (Guide rule) • TCT saw blade

SEE OFFER

Makita DC18SD 18v LXT Battery Charger 240v 52.9 GBP The Makita DC18SD 18V LXT Li-ion Battery Charger is a reliable and efficient charging solution for all your Makita LXT 18V Lithium-Ion batteries. Designed to optimise battery life and performance, this charger ensures your tools are always ready for the job. Featuring advanced charging technology, the Makita DC18SD provides fast and safe charging, reducing downtime and increasing productivity. It is equipped with a built-in fan that cools the battery during charging, preventing overheating and extending battery life. The charger also includes an LED indicator that displays the charging status, making it easy to monitor the progress. Specifications • Battery Voltage: 14.4-18v • Average Charging Time: 30-130min • Charging Time 2ah: 45 min • Charging Time 2.5ah: 45 min • Charging Time 3ah: 60 min • Charging Time 4ah: 90 min • Charging Time 5ah: 110 min • Charging Time 6ah: 130 min • Power Supply Cord: 2m

SEE OFFER

Makita DC18RD 18v LXT Twin Port Battery Charger 110v 119.9 GBP The DC18RD is a two port fast charger capable of charging two Makita slide style Lithium Ion Batteries (or Ni-MH batteries in conjunction with an adapter) at the same time. Both batteries will be charged fully in the same amount of the time as the DC18RC fast charger takes to charge a single battery. The DC18RD is also equipped with a USB port for charging USB devices. Specifications: Charge Times: • 2 x 18v 3.0ah Batteries: 22 mins • 2 x 18v 4.0ah Batteries: 36 mins • 2 x 18v 5.0ah Batteries: 45 mins • Battery voltage range: 14.4v - 18v • Battery type: Li-Ion (or Ni-MH in conjunction with an adapter) • Voltage: 110v

SEE OFFER

DeWalt DCS377 18v XR Cordless Brushless Compact Bandsaw No Batteries No Battery Charger Case 275.9 GBP Part of the DeWalt 18v XR Sub Compact range, the DCS377 is a lightweight and supremely portable cordless bandsaw which runs on any standard Dewalt 18v or Flexvolt XR battery. Ideal for cutting a wide range of materials, including Unistrut, threaded rod, angle iron, rebar, armoured cable, conduit and pipes, the DCS377 has a variable speed dial to ensure optimum cutting performance depending on the application. Additional benefits include an ergonomic rubber overmoulded handle which can be used comfortably in one hand, an integrated LED worklight, brushless motor, retractable hanging hook and large metal clips which ensure the blade is clamped securely in place while the machine is in use but can be easily accessed when required. Specifications • Battery Voltage: 18v • Battery Type: DeWalt XR Lithium Ion • Cut Capacity: 46 x 46 mm • Variable Speed: Yes • Tool Free Blade Change: Yes • SFPM: 150 - 380 SFPM • Length: 317.5 mm • Weight (without battery): 2.95 kg Features & Benefits • Compact cordless bandsaw powered by a DeWalt XR battery • Brushless motor • Variable speed • Trigger can be locked on for continuous use • Large overmoulded gripping area for secure hold even with gloved hands • Lightweight, evenly balanced design which is ideal for one handed use • Integrated LED worklight • Heavy duty metal clips keep the blade secure during use • Tool Connect compatible (chip not included) • Retractable hanging hook • Includes 18TPI bandsaw blade and TSTAK storage case Contents • DCS377NT-XJ 18v Cordless Bandsaw (bare tool) • 18TPI Bandsaw Blade • TSTAK Case • No Battery • No Charger

SEE OFFER

DeWalt DCM565 18v XR Cordless Brushless Compact Chainsaw 300mm No Batteries No Battery Charger No Case 177.9 GBP DeWalt's DCM565P1, part of the 18v XR lithium ion cordless platform, is a compact cordless chainsaw which has a brushless motor for maximum efficiency and longer runtimes (up to 70 4x4" cuts with a 5.0ah battery). Supplied with an Oregon bar & chain, it has a tool free chain tensioning system for ease of use and automatic oiling for reduced maintenance. Specifications • Battery Votage: 18v • Battery Type: DeWalt XR 18v Lithium Ion • Bar length: 30 cm • Lock-off switch: No • Charging current: 1A • 2nd Handle: Yes • Oil level window: Yes • Oil Capacity: 110-120ml L • Weight: 3.3 kg • Non slip grip: Yes • Sound Power Uncertainty: 96.5 dB(A) • Sound Pressure Uncertainty: 76.5 dB(A) • Hand/arm weighted vibration: 3.5 m/s2 Features and Benefits • 30cm Oregon Bar and Chain • High Efficiency Brushless Motor for increased runtime • Automatic Oiling - Reduced Maintenance • Tool Free Bar fitment & Chain Tensioning - Fast Chain Adjustments • Variable Speed Trigger - No pull starting and improved control during cutting • Chain Speed - 7.68 m/s • Extensive over-mould for extra grip and comfort in prolonged use Contents • DCM565N 18v Cordless Chainsaw Only • No Battery • No Charger • No Case

SEE OFFER

Dewalt DCB182 4.0ah 18v XR Lithium Ion Li-Ion Battery with DCB115 Charger 64.99 GBP The latest Dewalt lithium battery - the 4.0ah DCB182 replaces the DCB180, offering 33% more runtime with a 0% weight increase. DEWALT XR Li-Ion Battery Technology offers extended runtime and optimised power to complete applications quickly. Lightweight design provides the user with 18V power for the equivalent of 12V NiCd/NiMH pack weight. No memory effect and virtually no self-discharge for maximum productivity and less downtime. Compatible with all DEWALT XR Li-Ion 18V Tools. Excellent electrical characteristics. Comes with the Dewalt DCB115 charger.The DCB115 XR charger replaces the DCB105 The DeWalt DCB115-GB XR Multi-Voltage Charger will not only charge all of the 1.5Ah and 3.0Ah 14.4V and 18V XR batteries but also DeWalt 10.8V battery packs. This system provides great flexibility and means that you are choosing a growing universal charging platform with more tools in the range already on the horizon.

SEE OFFER

DeWalt DCE530 18v XR Cordless Hot Air Heat Gun No Batteries No Battery Charger No Case 90.9 GBP The DCE350 is a cordless heat gun which is powered by a DeWalt 18v (or 54v Flexvolt) XR power tool battery, meaning that users can undertake applications such as paint stripping, loosening nuts & bolts, unthawing frozen pipes, bending PVC, shrinkwrapping and removing labels or stickers without needing to be connected to mains power. Suitable for delivering hot air at a temperature of either 290°C or 530°C at a rate of 109-190 l/min, the DCE350 has an adjustable temperature slider switch for selecting high or low settings and is supplied with a choice of two nozzles. The trigger can be locked on to enable hands-free use and improve comfort during sustained usage, but it also has a lock-off safety switch which prevents the trigger from being activated accidentally during transport or storage. Additional benefits include a base-mounted LED worklight, side facing air vents. and an extremely compact, lightweight form factor at just 0.5kg excluding battery. Specifications • Battery Voltage: 18v • Battery Type: DeWalt XR Lithium Ion • Temperature: 290 - 530°C • Airflow: 109 - 190 l/min • Dimensions: 160mm x 55mm x 200mm • Weight (excluding battery): 0.5kg Features & Benefits • Compact cordless heat gun • Compatible with DeWalt 18v & 54v (Flexvolt) XR batteries • High and low temperature settings • Side air vents • Lock-off safety trigger reduces risk of thermal accidents during transport or storage • Trigger can be locked on for improved comfort and hands-free use • Includes reflector nozzle and surface nozzle Contents • DCE530N Cordless Heat Gun • Reflector Nozzle • Surface Nozzle • No Battery • No Charger • No Case

SEE OFFER

Makita DHS680 18v LXT Cordless Brushless Circular Saw 165mm No Batteries No Battery Charger No Case 205.9 GBP The Makita DHS680 18v Cordless LXT Brushless Circular Saw has a brushless motor which minimises friction to the internal mechanism for more efficient battery power utilisation and a longer service life. With automatic speed control this model automatically adapts the cutting speed to the load condition for optimised sawing performance. The LED indicator panel shows battery power remaining, state of automatic speed control and confirmation of overload protection activation. The twin LED work light illuminates the workpiece from multiple angles for enhanced visibility of the cutting line. The magnesium die-cast base plate, blade case and safety cover reduces the weight of the tool for improved portability and handling. Features & Benefits • Automatic Speed Control • Battery fuel gauge • Blower function to clear wood dust from cutting line • Compact and lightweight design • Electric brake • Electronic current limiter for overload protection • Ergonomic soft grip • Large lock off lever • Larger base than current models for more stable operation • Rear dust exhaust port • Soft start • Tool Hanger • Twin LED job light Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium-ion • Blade Diameter: 165mm • Max Cut @: 0° - 57mm, 45° - 41mm, 50° - 37mm • Bore Diameter: 20mm • Noise Sound Pressure: 83dB(A) • Noise Sound Power: 94dB(A) • Noise K Factor: 3dB(A) • No Load Speed: 5,000rpm • Vibration K Factor: 1.5m/sec² • Vibration Cutting Wood: 2.5m/sec² • Net Weight: 3.3kg Contents • Makita DHS680 18v LXT Cordless Brushless Circular Saw • TCT Blade • Hex Wrench • Rip Fence • Dust Nozzle • No Batteries • No Charger • No Case

SEE OFFER

Makita DHR202 18v LXT Cordless SDS Hammer Drill No Batteries No Battery Charger No Case 125.94 GBP The DHR202 is a 3 mode SDS Plus rotary hammer drill which is powered by Makita 18v LXT lithium ion batteries. Specifications • Compatible battery type - Lithium-ion • Voltage - 18 v • Max in concrete - 20 mm • Max. in steel - 13 mm • Max. in wood - 26 mm • Impact energy - 2.0 J • Blows per minute - 0-4000 bpm • Noise sound pressure - 87 dB(A) • Noise sound power - 98 dB(A) • Noise K factor - 3 dB(A) • No Load Speed - 0 - 1100 rpm • Vibration: Drilling - 3 m/sec² • Vibration K factor - 1.5 m/sec² • Vibration: Hammer Drilling - 14.5 m/sec² • Vibration: Chiselling - 11 m/sec² • Net weight - 3.2 kg Features and Benefits • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow • One-touch sliding chuck for easy bit changes • Triple operation mode: Rotary only, hammer only and rotary hammer • Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions Contents • DHR202RMJ 18v Cordless Rotary Hammer Drill • Side Handle • Depth Stop • No Battery • No Charger • No Case

SEE OFFER

Makita DC18RC 18v LXT Battery Charger 240v 45.94 GBP Makita DC18RC is a new developed compact size fast charger with the equivalent functions as current model DC18RA. Features and Benefits• Innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger and battery• Cooling fan to keep the battery temperature low for minimum charging timeSpecificationsBattery Range: 7.2 - 18vBattery Type: Lithium IonCharging TimeBL1850 5Ah - 45 MinutesBL1840 4Ah - 36 MinutesBL1830 3Ah - 22 MinutesBL1430 3Ah - 22 MinutesBL1415 1.3Ah - 15 Minutes

SEE OFFER

DeWalt DCH253 18v XR Cordless SDS Plus Hammer Drill No Batteries No Battery Charger No Case 170.9 GBP Features and Benefits• Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm• Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal• Best in class vibration, 6.9m/s² reduces user fatigue and maximises operating periods• Bright white LED with delay feature improves visibilitySpecifications• No Load Speed: 0-1200 rpm• Tool Holder: SDS-Plus• Blows per Minute: 0-4500 bpm• Impact energy (EPTA 05/2009): 2.1 Joules• Power Output: 400 Watts• Voltage: 18 V• No Battery• No Charger

SEE OFFER

Makita Makita DC18RC LXT 18V Compact Battery Charger 64.78 GBP The Makita DC18RC Battery Charger benefits from Intelligent Charging Technology to control current, voltage and temperature to maximize the battery life. Charges BL1830 18v 3.0Ah batteries in approximately 22 minutes.

SEE OFFER

Makita DUT130 18v LXT Cordless Brushless Paddle Mixer No Batteries No Battery Charger No Case 277.9 GBP The DUT130 is a cordless mixer which is powered by a Makita 18v LXT Li-Ion battery. It has a soft start brushless motor, two mechanical gears and a variable speed trigger. Please Note: The DUT130 is not suitable for mixing plaster. Features & Benefits • Brushless motor • 2 mechanical gears • Variable speed control by trigger • Soft start • Splash guard • Switch cover • Battery cover • Lock on function • Ergonomic soft grip Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Max Paddle Diameter: 165 mm • Noise sound pressure: 74 dB(A) • Noise K factor: 3 dB(A) • Spindle Size: M14 • No Load Speed (Hi): 0 - 1300 rpm • No Load Speed (Lo): 0 - 350 rpm Contents • DUT130Z 18v Cordless Paddle Mixer (bare tool) • No Battery • No Charger • No Case

SEE OFFER

Makita DHR242 18v LXT Cordless Brushless SDS Hammer Drill No Batteries No Battery Charger No Case 205.9 GBP Makita DHR242 SDS Plus Hammer Drill has an efficient brushless DC motor that provides higher productivity. It has a slide chuck for quick and easy SDS Plus bit changes. It offers 3 modes of operation: Rotary drilling, Hammer drilling or Chiseling. The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers. This unique joint construction suppresses the transmission of vibration to the battery terminals, minimising battery failures such as terminal breakage or poor electrical contact. Features & Benefits • Able to drill in concrete as fast or faster than 24v Cordless BHR200 Combination Hammer • One touch slide chuck for SDS plus bit • Easy to grip handle ergonomically designed • 3 mode operation • The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers • Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact Specifications • Battery Voltage: 18v • Battery Type: Li-ion • Blows per Minute: 0-4,700bpm • Capacity in Steel/Concrete/Wood: 13/24/27mm • Impact Energy: 2.0 J • No Load Speed: 0-950rpm • Vibration Chiselling: 10.5m/sec² • Vibration Drilling: 3.5m/sec² • Vibration Hammer Drilling: 13.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.3kg Contents • DHR242 18v LXT Brushless SDS Hammer Drill • Depth Gauge • Side Handle • No Batteries • No Charger • No Case

SEE OFFER

Makita DPB180 18v LXT Cordless Bandsaw No Batteries No Battery Charger No Case 480.9 GBP The Makita DPB180 has been developed as a cordless portable bandsaw powered by 18v Lithium-Ion batteries. This model is an extremely lightweight design and still ensures high performance. Features & Benefits • Lightweight design • Only 22 minute charge time with the air cooled Makstar Optimum Charging System • Adjustable stopper plate for cutting pipes near wall or floor • Built-in LED light for excellent work efficiency in dimly lit workplaces • Ergonomically designed soft grip for superior handling and comfortable operation Specifications • Battery Type: Makita LXT Lithium-Ion • Voltage: 18v • Round Pipe Diameter: 120mm • Square Pipe: 120 x 120mm • Noise Sound Pressure: 81dB(A) • Blade Speed: 1.4 – 2.7m/sec • Overall dimensions: 523mm • Net weight: 6.4kg Contents • Makita DPB180 18v Cordless LXT Bandsaw • No Batteries • No Charger • Hex Wrench • Saw Blade

SEE OFFER

Makita DC18RC 18V Li-ion Cordless 7.2V - 18V Fast Battery Charger 240V 28.85 GBP The Makita DC18RC Li-ion Cordless 7.2V - 18V Fast Battery Charger uses Intelligent Charging Technology to control current voltage and temperature to maximize the battery life.The Makita DC18RC Li-ion 7.2 / 14.4 / 18v LXT Charger uses Intelligent Charging Technology to control current voltage and temperature to maximise the battery life.The CPU built into the DC18RC charger communicates with the individual batteries and analyses its condition the battery may have been abused by heat overdischarging or weathered by cycle-age.Makita Lithium-ion battery chargers evenly charge throughout all the cells in the battery on discharging the battery draws evenly resulting in an optimum charge.Cells in some other brands of batteries are not charged evenly resulting in cells not being used completely so workloads are decreased at a charge.The Makita DC18RC analyses the data stored in the battery chip to decide on the best charging method at that time.Makita Forced Air Cooling Fan technology cools the battery during charging by forcing cool air through the battery' s built in air vents prolonging the life of the battery.The cooling system blows cool air into the battery & as a result when high temperatures occur in the battery it cools the battery so the life of the battery is extended + the charging process is accelerated as well.Built in sounds let you know charging status and completion.This innovative technology from Makita results in longer battery life.The DC18RC can charges a BL1830B 18v LXT 3.0Ah battery in approximately 22 minutes - and to the fullest charge.Charges the Makita LXT range of Batteries BL1830B 3.0 a/h BL1840B 4.0 a/h & BL1850B 5.0 a/h batteries.FeaturesRapid Charging: Fully charges a 3.0Ah Li-Ion battery in just 22 minutesIntelligent CPU: Utilises data from the battery's memory chip for optimal chargingCooling System: Features a fan that cools the battery during charging enhancing battery life and speeding up the processDigital Display: Includes a three colour charging indicator to show battery status and charging levelMemory Chip Integration: Compatible with Makita’s 18V & 14V batteries recording usage history for efficient chargingLithium Ion Advantage: Enables charging at any time eliminating the need for complete discharge before recharging surpassing older technologies like Ni-CadVersatile Compatibility: Can charge Ni-MH slide on batteries (9.6V to 24V) using adapter ADP03 and Ni-Cd and Ni-MH rod and block batteries (7.2V to 18V) with adapter ADP04

SEE OFFER

Makita DUB185 18v LXT Cordless Blower No Batteries No Battery Charger No Case 85.9 GBP Part of Makita's 18v LXT cordless range, the DUB185 is a compact and lightweight blower which can also be used as a vacuum cleaner if a suitable dust bag is attached (not included). Designed to offer increased air volume compared to previous models, the DUB185 has three air volume settings and a variable speed trigger for maximum control. This is a bare tool which is supplied without a battery or charger. It can be used with any Makita 18v LXT lithium ion power tool battery. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • No Load Speed: 0 - 18,000 rpm • Air Volume Settings: 3 • Vacuum Function: Yes • Max air velocity: 98 m/sec • Max air volume: 3.2 m³/min • Max Sealed Suction: 5.8 kPa • Noise sound pressure: 83 dB(A) • Noise sound power: 94 dB(A) • Noise K factor: 3 dB(A) Features and Benefits • Cordless Jobsite / Workshop blower • Variable speed control by trigger • 3 air volume settings: Low, Medium, High • Increased air volume • Compact and lightweight design • Ergonomic soft grip • Vacuum function - can be used as a vacuum with a dust bag (not included) Contents • DUB185Z 18v Cordless Blower (Bare Tool) • No Battery • No Charger • No Case

SEE OFFER

Makita DC18RC 18v LXT Battery Charger 110v 64.94 GBP Makita DC18RC is a new developed compact size fast charger with the equivalent functions as current model DC18RA. Features & Benefits • Innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger and battery • Cooling fan to keep the battery temperature low for minimum charging time Specifications • Battery Range: 7.2 - 18v • Battery Type: Lithium Ion • Voltage: 110 Charging Time • BL1850 5Ah - 45 Minutes • BL1840 4Ah - 36 Minutes • BL1830 3Ah - 22 Minutes • BL1430 3Ah - 22 Minutes • BL1415 1.3Ah - 15 Minutes

SEE OFFER

DeWalt DCS565 18v XR Cordless Brushless Circular Saw 165mm No Batteries No Battery Charger No Case 155.9 GBP The DeWalt DCS565 is an 18v XR Brushless Circular Saw with an ultra-thin kerf of 165mm. Featuring a 24 tooth carbide-tipped blade, allows for efficient run time and a fast, smooth cut finish at maximum 55mm depth of cut. Featuring an extremely durable tool design, including a cast aluminium base for repetitive, accurate cuts. The DCS565 also has a lock off switch and electronic brake for additional control and work safety. Features and Benefits • Additional handle for safe two-handed work • LED work light for improved cut line visibility • Dust blower clears dust and debris from cut line • Direct compatibility with DeWalt AirLock system • Optimum balance for safe, fatigue-free operation • Lock off switch and electronic motor brake Specifications • Battery Type: DeWalt XR Lithium-Ion • Voltage: 18v • Blade Bore: 20mm • No Load Speed: 4950rpm • Blade Diameter: 165mm • Max Depth Cut at 90°: 55mm • Uncertainty K1 (Vibration): 1.5 • Uncertainty K2 (Vibration): 1.5 • Product Length: 314mm Contents • DeWalt DCS565 18v XR Brushless Circular Saw 165mm • No Batteries • No Charger • No Case • Precision 24 Tooth Saw Blade • Rip Fence • Hex Key • Dust Extraction Spout

SEE OFFER

Makita JV101D 12v Max CXT Cordless Jigsaw No Batteries No Battery Charger No Case 85.9 GBP Makita's CXT range comprises of compact professional power tools which use slide on 10.8v lithium ion batteries. These are available in higher capacities than the older stick type batteries, and have multi-contact terminals to ensure a solid connection when exposed to vibration and impacts. Additionally, they have overload protection circuitry and can be used in extreme cold, down to -20°C. The JV101 is a cordless CXT jigsaw with an electric brake, integrated dust blower and a selection of 3 orbital settings with an additional straight cutting mode. It has a variable speed trigger and electric brake for optimum control, and a 0-45° bevelling aluminium sole plate. Specifications • Voltage: 10.8v • Battery Type: Li-ion CXT • Capacity in Aluminium: 4mm • Capacity in Mild Steel: 2mm • Capacity in Wood: 65mm • Settings: 3 orbital + straight cut • Stroke Length: 18mm • Noise sound pressure: 80 dB(A) • Noise sound power: 91 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 0 - 2900 spm • Vibration K factor: 1.5 m/sec² • Vibration: Cutting Chipboard: 7.0 m/sec² • Vibration: Cutting Sheet Metal: 5.5 m/sec² • Net weight: 1.9 kg Features and Benefits • Uses slide type CXT Li-ion batteries • 3 orbital settings plus straight cutting • Electric brake • Variable speed trigger control. • Ergonomically designed handle • Blower function - blows sawdust off the cut line • Rigid aluminium base bevels 0 to 45 degrees left and right. • Dust extractor compatible (with correct attachment installed) Contents • JV101 Cordless CXT jigsaw only • No Battery • No Charger • No Case

SEE OFFER

DeWalt DCS570 18v XR Cordless Brushless Circular Saw 184mm No Batteries No Battery Charger No Case 165.9 GBP The DeWalt DCS570 18v XR brushless circular saw offers extended run time and a 64mm depth of cut. Specification • Battery chemistry: Li-Ion • Voltage: 18v V • No Load Speed: 5500 rpm • Blade Diameter: 184 mm • Blade Bore: 16 mm • Bevel Capacity: 57 ° • Max. Depth of Cut at 90º: 64 mm • Weight: 3.6 kg • Length: 355 mm • Height: 245 mm • Hand/Arm Vibration: 2.5 m/s2 • Uncertainty K 1 (Vibration): 1.5 m/s² • Sound Pressure: 91 dB(A) • Sound Pressure Uncertainty: 3 dB(A) • Sound Power: 102 dB(A) • Sound Power Uncertainty: 3 dB(A) Features and Benefits • Scale for precise cutting depth setting to 65 mm • General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials • High torque Brushless motor for durability and power for cutting job site and joinery materials • Stable block construction for low vibration running and long service life • Additional handle for safe two-handed work • Variable adjustment of the bevel angle to 57 degrees • Optimum balance for safe, fatigue-free operation Contents • Precision 24 tooth saw blade • Rip Fence • Blade Spanner • Dust Extraction Spout • No Battery • No Case

SEE OFFER

DeWalt DCMPH566 18v XR Cordless Pole Hedge Trimmer 550mm No Batteries No Battery Charger 235.9 GBP Part of DeWalt's cordless landscaping range, the DCMPH566 is an 18v hedge trimmer which can be used with a DeWalt 18v XR battery or with one of the larger Flexvolt batteries which will enable it to be used for longer periods without interruption. Extended reach and an articulating head means the DCMPH566 is ideal for trimming taller or deeper hedges as well as accessing other awkward areas while maintaning a comfortable standing position. The machine has been carefully weight balanced to minimize fatigue and the lightweight shaft reduces strain on the arms. The DeWalt XR battery platform provides a much more user friendly alternative to petrol powered landscaping tools, and the outdoor range consists of all the essentials such as hedge and grass trimmers, chainsaws, lawnmowers and leaf blowers. As well as all the tools in the range, we stock a complete selection of DeWalt batteries, chargers and accessories. The DCMPH566 is available either as a complete kit with a battery and charger or as a bare tool foor users who do not need them. This version is the bare tool and can be used with any DeWalt 18v XR or Flexvolt XR lithium ion power tool batteries. Specifications • Battery Voltage: 18v • Battery type: DeWalt XR Lithium Ion • Cut Capacity: 25mm • Machine Weight: 3.6kg Contents • DCMPH566N 18v Cordless Hedge Trimmer • No Battery • No Charger

SEE OFFER

Makita DJV184 18v LXT Cordless Brushless Jigsaw No Batteries No Battery Charger No Case 150.9 GBP The Makita 18v Jigsaw LXT is a top handle type cordless jigsaw powered by 18v LST Li-ion batteries. The "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body. This model features 3 orbital settings and straight cutting as well as a lock-on function. Specifications • Voltage: 18v • Max in aluminium: 20 mm • Max in steel: 10 mm • Max in wood: 135 mm • Strokes per Minute: 0-3,000 spm • Shank: Universal • Stroke Length: 23 mm • Noise sound pressure: 82 dB(A) • Noise K factor: 3 dB(A) Features & Benefits • High cutting performance • Tool-less blade clamp for easy blade change with one hand • Lock-on function • Soft start • LED with light up function during standby mode • Variable speed control • Electric brake • Anti-restart function • Dust collection • Compact and lightweight design Contents • DJV184Z Cordless Jigsaw (bare tool) • Accessory set • Hex wrench • Cover plate • No Battery • No Charger • No Case

SEE OFFER

Makita DLX2131 18v LXT Cordless Combi Drill and Impact Driver Kit 2 x 5ah Li-ion Battery Charger Case 307.9 GBP The DHP482 18v LXT Combi Drill from Makita is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability as well as an electric brake and variable speed control trigger. You will find this an extremely comfortable drill to use with its ergonomic soft grip handle and lightweight design. Model DTD152 is a cordless impact driver powered by 18v Li-ion battery and developed for main applications such as tightening of self-drilling screws or light duty machine screws. Model DHP482 is a cordless hammer driver drill that has been developed as the successor to the model DHP456 and the DTD152 has been developed as the successor to the model DTD146. DHP482 Combi Drill Features & Benefits • Electric brake • Mechanical 2-speed control • Variable speed control trigger • Forward/reverse rotation • Twin LED job light • Ergonomic soft grip handle • Compact overall length of 198mm • Single sleeve keyless chuck • Lightweight design • Battery protection circuit • Belt clip • All metal gear construction for extra high transmission durability DTD152 Impact Driver Features & Benefits • Electric Brake • Variable speed control trigger • Forward/reverse rotation • Twin LED job light • High rotation speed • One-touch bit installation • Ergonomically designed soft grip handle • Compact overall length of 137mm • Lightweight design • Battery protection circuit • Belt clip Contents • 1 x DHP482 LXT Combi Drill • 1 x DTD152 LXT Impact Driver • 2 x 5ah Lithium-ion Batteries • 1 x DC18RC Charger • 1 x Makpac Type 3 Case

SEE OFFER

Makita DHP453 18v LXT Cordless Combi Drill No Batteries No Battery Charger No Case 75.9 GBP With a single sleeve keyless drill chuck, the DHP453 ensures swift bit changes for uninterrupted workflow. Its compact, lightweight design facilitates easy handling in any workspace, while high comfort rubberised grips minimize fatigue during extended use. Equipped with a 2-speed metal gearbox, the DHP453 delivers optimal performance across various materials. With 16 torque settings and 3 drill action settings, it offers unparalleled versatility for a wide range of applications. The electric brake enhances safety by swiftly stopping rotation upon trigger release, ensuring precision and preventing overdriving. Convenience is paramount, with a conveniently located push button for forward and reverse, facilitating seamless transitions between tasks. The variable speed trigger provides precise control over drilling speed, ensuring accurate results every time. Features and Benefits • Single sleeve keyless drill chuck • Compact and lightweight • Rubberised grips • 2 Speed metal gearbox • 16 torque settings • 3 drill action settings • Electric brake • Conveniently located push button • Variable speed trigger Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blows per Minute: 6,000-19,500bpm • Max Torque: 42Nm • Max. in Masonry: 13mm • Max. in Steel: 13mm • Max. in Wood: 36mm • No Load Speed: 400-1,300rpm • Noise K Factor: 3dB(A) • Noise Sound Pressure: 78dB(A) • Torque Settings: 16+Drill • Vibration Drilling: 2.5m/sec² • Vibration Hammer Drilling: 7.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.7-2.0kg Contents • Makita DHP453 18v LXT Cordless Combi Drill • Double Ended Bit • No Batteries • No Charger • No Case

SEE OFFER

DeWalt DCM561S 18v XR Cordless Brushless Split Shaft Grass Trimmer 330mm No Batteries No Battery Charger 137.9 GBP The DCM561S is an 18v cordless XR split shaft grass trimmer with a brushless motor, two speed settings, variable speed control, paddle switch and a patented gear drive which helps to maintain cutting speed while under load. Supplied with 7 metres of 2.0mm cutting line, the DCM561S has a 33cm cutting width for optimum power and a comfortable rubber auxiliary handle for maximum control. Specifications • Battery Voltage: 18v • Battery Type: DeWalt XR Lithium Ion • Cutting Swath: 330mm Features & Benefits • Brushless motor for increased runtime with less maintenance • Split shaft for ease of shipping & storage • 33cm cutting wath for optimum power • Includes 7 metre cutting line • Patented gear drive, maintains speed under load • Dual switching paddle with lock off for added comfort and safety • Variable speed with high/low control • Rubber auxiliary handle for added comfort, grip and control Contents • DCM561S 18v Cordless Grass Trimmer • Cutting Line (7 metres) • No Battery • No Charger

SEE OFFER

Stihl Stihl MSA 60 (AK system) 36V 30cm Cordless Chainsaw with 5Ah Battery and Charger 287.98 GBP The lightweight and superbly balanced MSA 60 is perfectly suited to pruning back small branches around the garden and for cutting up smaller logs for the fire. With quick, tool-less chain tensioning, simple controls, the MSA 60 is easy to use. The AK 20 battery can also be used in many other tools in the AK System. Includes battery and charger

SEE OFFER

Makita DUN461W 18v LXT Cordless Telescopic Pole Hedge Trimmer 460mm No Batteries No Battery Charger 179.9 GBP Part of the Makita 18v LXT battery platform, the DUN461W is a telescopic pole hedge trimmer which comes in at just over 2.5 metres in length when fully extended. Compatible with all Makita 18v LXT power tool batteries, it has an adjustable head with 10 angle positions, a high cutting speed for clean and smooth trimming, and a reverse switch which enables the teeth to be freed easily if they get jammed on thick material. Features & Benefits • Makita 18v cordless long reach hedge trimmer • Compatible with all Makita 18v LXT lithium ion batteries • Adjustable head; 60° tilt-up to 75° tilt-down from horizontal • Head can be set to 10 different angle settings • Telescopic shaft for adjusting the length of the tool • Lock lever for tool-free adjustments • Slide-type front grip position is adjustable for personal fit and comfort • Reverse rotation system frees the blade when it is jammed by thick branches • Lock-off function • High cutting speed enables smooth and efficient trimming • Low noise and vibration Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Strokes per Minute: 3,600 spm • Overall Length: 1,889 - 2,511 mm • Blade Length: 460 mm • Max Branch Diameter: 10 mm • Blade Type: Double Sided • Noise sound pressure 74 dB(A) • Noise K factor 3.6 dB(A) • Net weight: 3.0 - 3.3 kg Contents • DUN461WZ 18v Cordless Hedge Trimmer (bare tool) • Blade Cover • No Battery • No Charger

SEE OFFER

Makita DSD180 18v LXT Cordless Drywall Cutter No Batteries No Battery Charger No Case 190.9 GBP The DSD180 is a cordless drywall saw which is powered by an 18v Makita LXT power tool battery. It has been developed for cutting holes in drywall when setting ceiling lights, air vents etc. Compared with standard cut-out tools, the DSD180 is especially well suited to straight cuts. An integrated dust box serves to catch the dust when working overhead, and a dust port enables the tool to be connected up to an external dust extractor or vacuum cleaner. It can be fitted with blades for wood as well as drywall. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade for Drywall: 55 x 18 x 0.55 mm • Blade for Wood: 53 x 18 x 0.55 mm • Capacity in Drywall: 30 mm • Capacity in Wood: 15 mm • Strokes per Minute: 0 - 6,000 spm • Stroke Length: 6 mm • Noise sound pressure: 79 dB(A) • Noise K factor: 3 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Cutting Chipboard): 5.0 m/sec² Features and Benefits • Cordless drywall cutter powered by a Makita LXT battery • Ideal for overhead work • Variable speed • LED job light • Cutting depth adjustment • Base cover protects drywall surfaces from scratches and damage • Weight balanced for comfortable grip • Easy straight cutting achieved by blade shape and cutting system • Dust box designed to catch dust in overhead applications • Dust port for connecting to dust extractor • On-tool storage for hex wrench • Screw down blade clamp • Orbital mechanism • Trigger lock • Battery fuel gauge Contents • DSD180Z 18v Cordless Drywall Cutter (Bare Tool) • Saw Blade • Blade Cover • Base Cover • Hex Wrench • No Battery • No Charger • No Case

SEE OFFER

Makita DHP484 18v LXT Cordless Brushless Combi Drill No Batteries No Battery Charger No Case 110.94 GBP The DHP484 is a 2 speed brushless LXT machine with all metal gears and gear housing, an electric brake and an LED worklight. It has a hammer setting for drilling into masonry and concrete as well as a standard rotary mode for driving screws and drilling into materials like wood, metal or plastic. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • No Load Speed (Hi): 0 - 2,000 rpm • No Load Speed (Lo): 0 - 500 rpm • Blows per Minute (Hi): 0 - 30,000 ipm • Blows per Minute (Lo): 0 - 7,500 ipm • Torque Settings: 21 + drill • Max. Fastening Torque (Soft Joint): 30 Nm • Max. Fastening Torque (Hard Joint): 54 Nm • Chuck Capacity: 1.5 - 13mm • Capacity in Steel: 13mm • Capacity in Wood: 38mm • Capacity in Masonry: 13mm Features & Benefits • Brushless motor • Electric brake • 2 mechanical gears. • Variable speed control by trigger • Forward/reverse rotation • LED job light • Compact Overall Length of 182mm • Keyless Chuck • Aluminium Gear Housing • All metal gear construction • Ergonomic soft grip • Belt clip Contents • Makita DHP484 18v LXT Cordless Brushless Combi Drill • No Battery • No Charger • No Case • Belt Clip

SEE OFFER

Energizer Universal Battery Charger

Comparison of similar products