Review Clarke clarke devil 6003 3kw industrial electric fan heater

Clarke Clarke Devil 6009 9kW Industrial Electric Fan Heater (400V) 149.97 GBP Clarke’s 3 phase electric fan heater effectively and safely provides up to 9kW of heat output. A rugged steel casing, with tough enamel finish ensures adequate protection against knocks & bumps. The thermostatically controlled, adjustable heat output makes sure the desired temperature is quickly achieved. Please note the glow shown on the image is for illustration purposes only. NB: Please note a 3 phase power supply will be required to use this heater. This heater will not run off a domestic power supply. Requires Clarke DCL16A 16amp Mains lead to be connected to a mains supply. Only suitable for well insulated areas and not designed to be the primary heat source.

SEE OFFER

Clarke Clarke Devil 6015 15kW Industrial Electric Fan Heater (400V) 221.97 GBP Clarke’s 3-phase electric fan heater effectively and safely provides up to 15kW of heat output for numerous small & medium sized commercial and industrial premises. A rugged steel casing, with tough enamel finish ensures adequate protection against knocks & bumps. The thermostatically controlled, adjustable heat output makes sure the desired temperature is quickly achieved. Please note the glow shown on the heater image is for illustration purposes only. NB: Please note a 3 phase power supply will be required to use this heater. This heater will not run off a domestic power supply. Requires Clarke DCL32A 32 Amp mains lead .

SEE OFFER

15% Off Weekend Clarke Devil 7003 3kW Industrial Electric Fan Heater (230V) 83.98 GBP The Clarke Devil 7003 Electric Fan Heater is ideal for industrial applications including workshops, factories and garages, with the high and low heat settings with adjustable thermostatic control and the thermal cut-out overheat protection. Insulated handles allow for safe handling whilst the heater is still warm.

SEE OFFER

Clarke Clarke Devil 7015 15kW Industrial Electric Fan Heater (400V) 268.79 GBP The Clarke Devil 7015 Electric Fan Heater is ideal for industrial applications including workshops, factories and garages, with the high and low heat settings with adjustable thermostatic control and the thermal cut-out overheat protection. Insulated handles allow for safe handling whilst the heater is still warm.

SEE OFFER

Clarke Clarke Devil 7009 9kW Industrial Electric Fan Heater (400V) 172.79 GBP The Clarke Devil 7009 Electric Fan Heater is ideal for industrial applications including workshops, factories and garages, with the high and low heat settings with adjustable thermostatic control and the thermal cut-out overheat protection. Insulated handles allow for safe handling whilst the heater is still warm.

SEE OFFER

Clarke Clarke Devil 7030 30kW Industrial Electric Fan Heater (400V) 460.79 GBP Clarke's Devil 7030 Electric Fan Heater is ideal for industrial applications including workshops, factories and garages, with the high and low heat settings with adjustable thermostatic control and the thermal cut-out overheat protection. Insulated handles allow for safe handling whilst the heater is still warm.

SEE OFFER

Clarke Clarke Devil 7025 22kW Industrial Electric Fan Heater (400V) 364.79 GBP The Clarke Devil 7025 Electric Fan Heater is ideal for industrial applications including workshops, factories and garages, with the high and low heat settings with adjustable thermostatic control and the thermal cut-out overheat protection. Insulated handles allow for safe handling whilst the heater is still warm.

SEE OFFER

Clarke Clarke Contractor Devil 3003-B 2.8kW Electric Fan Heater (110V) 137.97 GBP The Clarke DEVIL 3003-B is an effective yet efficient heater for the trade. Utilising a lightweight and portable design, it comes supplied fitted with a heavy duty input lead and 110V plug. Ideal as a secondary heat source for heating well insulated indoor areas on site. **Please note, glow in image is for illustrative purposes only.

SEE OFFER

Clarke Clarke Devil 2850 2.8kW Electric Fan Heater 53.97 GBP The Devil 2850 2.8kW electric fan heater is ideal for heating your workshop or garage. The heater is constructed with a sturdy steel frame with tough powder coated finish. Weighing in at just over 2.5kg with a convenient carry handle this heater is lightweight and portable enough to be easily transported. The DEVIL 2850 has 3 settings; Heater 1 (1.4kW), Heater 2 (2.8kW) and fan only setting for cooling during warmer weather. For added safety, the heater benefits from a tip-over cut-off switch which will trigger in the unlikely event of the heater being knocked either forwards or backwards. The full range of Clarke DEVIL electric heaters are supplied with a 12-Month Manufacturer's Warranty. **Please note, glow in image is for illustration purposes only.

SEE OFFER

Jetheat 3kW Single Phase Industrial Fan Heater, Suitable for Areas Up to 60M3. Stainless Steel Heating Elements, Adjustable Thermostat Control with Ov 133.2 GBP The Jet Heat series of industrial electric fan heaters are designed for use in workshops, nurseries, showrooms, storage rooms, construction sites, containers, ideal for small to large areas. The OLY-J3/1 is a single phase 3k W fan heater, it will come fitted with a 1. 4m cable with a 3 pin plug. This models robust stand allows the unit to be adjusted vertically through an angle of 30 degrees to provide comfortable heating. All of the Jet Heat models have an in-built over heat protection which will keep the fan on after the unit has been switched off, this will cool down the heating elements safely to prevent damage to the unit.

SEE OFFER

Jetheat 15kW Three Phase Industrial Fan Heater, Suitable for Areas Up to 300M3. Stainless Steel Heating Elements, Adjustable Thermostat Control with O 408 GBP The Jet Heat series of industrial electric fan heaters are designed for use in workshops, nurseries, showrooms, storage rooms, construction sites, containers, ideal for small to large areas. The OLY-J15/3 is a single phase 15k W fan heater, this model does not come with a cable see product code OLY-CAB/1. 6/15KW if required. This models robust stand allows the unit to be easily manoeuvrable to provide comfortable heating. All of the Jet Heat models have an in-built over heat protection which will keep the fan on after the unit has been switched off, this will cool down the heating elements safely to prevent damage to the unit.

SEE OFFER

Clarke Clarke Devil 9000PTC 9kW Fan Heater (400V) 161.97 GBP A great heater for workshops, factories and industrial units. Large variable heat output yet still compact, tough and robust. Featuring a composite aluminium & ceramic PTC (positive temperature coefficient) heater element. This means: - Rapid heating of the element Self-regulating temperature Heating power is controlled by the air flow

SEE OFFER

Jetheat 9kW Three Phase Industrial Fan Heater, Suitable for Areas Up to 180M3. Stainless Steel Heating Elements, Adjustable Thermostat Control with Ov 249.6 GBP The Jet Heat series of industrial electric fan heaters are designed for use in workshops, nurseries, showrooms, storage rooms, construction sites, containers, ideal for small to large areas. The OLY-J9/3 is a single phase 9k W fan heater, it will come fitted with a 1. 4m cable with a 5 pin plug. This models robust stand allows the unit to be adjusted vertically through an angle of 30 degrees to provide comfortable heating. All of the Jet Heat models have an in-built over heat protection which will keep the fan on after the unit has been switched off, this will cool down the heating elements safely to prevent damage to the unit.

SEE OFFER

Clarke Clarke Devil 5000PTC 5kW Fan Heater 93.58 GBP A great heater for workshops, factories and industrial units. Large variable heat output yet still compact, tough and robust. Featuring a composite aluminium & ceramic PTC (positive temperature coefficient) heater element. This means rapid heating of the element and self-regulating temperature – Heating power is controlled by the air flow. Please Note – Only suitable for well insulated areas and not designed to be the primary heat source.

SEE OFFER

Clarke Clarke DEVIL 2000PTC-B 2kW Ceramic Fan Heater (230V) 41.97 GBP The Clarke Devil 2000PTC-B is great heater for workshops, factories and industrial units. Featuring a composite aluminium & ceramic PTC (positive temperature coefficient) heater element. This means rapid heating of the element and self-regulating temperature where the heating power is controlled by the air flow and uniform heating with minimal power variation. With its minimal warm up time, the Devil 2000PTC-B ceramic heater is an easy and convenient way to quickly warm rooms. Variable heat output means a constant, comfortable room temperature can be easily maintained. Please Note – Only suitable for well insulated areas and not designed to be the primary heat source. Fast efficient heating in workshops, garages etc. - Operating voltage 230V~50Hz, 1 phase - Super compact yet big heat output - Fan only mode & 2x heat settings - Variable heat output up to 2kW - Thermostat temperature control - Thermal cut out device for safety - Steel body

SEE OFFER

Sealey - EH2001 Industrial Garage Workshop Electric Fan Heater 2kw No Fumes Smell 71.99 GBP Sealey: Industrial Fan Heater 2KW Electric fan heater for industrial applications. One heat setting with thermostat control, plus fan only. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Supplied with power cable and 3-pin plug. MPN: EH2001 EAN: 5051747508057 Industrial Fan Heater 2KW Attributes: MFR Part No.: EH2001

SEE OFFER

3kW Tilting Electric Industrial Workshop Garage Space Fan Heater - Oypla 39.99 GBP 3kW Tilting Electric Industrial Workshop Garage Space Fan Heater The industrial heater is perfect for quickly heating small workshops, garages, sheds, etc. The heater features 2 adjustable heat settings and also features a fan to quickly spread the heat throughout the area; the fan can also be used without heat for cooling uses. The heater produces a dry heat making it safe to use in damp conditions and also features a built-in thermostat to prevent overheating. Product Specifications: Power: 1500/3000W Dimensions: 24.5 x 24 x 31cm Air Displacement: 286m³/h Heating Area: 30m³ Weight: 3.4kg IP24 Protection

SEE OFFER

Sealey - Industrial Fan Heater 3kW 2 Heat Settings EH3001 101.68 GBP Electric fan heater for industrial applications. Two heat settings with thermostat control, plus fan only option. A totally dry heat with no condensation, no gas, no fumes and no smell. Easily portable with a carry frame makes it ideal for workshops and garages. Includes tip-over switch for added safety. 10,000Btu/hr (3KW) that can heat an area of 60m. Supply 230V - 16A. Supplied with power cable only. INDUSTRIAL FAN HEATER 10,000 Btu/hr (3kW) Heat output with 230V 16A supply. Heats an area of 60m. MULTIPLE SETTINGS Two heat settings with thermostatic control and a fan only option which are ideal for use in a workshop or garage environment. PORTABLE HEATER The fan heater is easy to transport to different places as supplied with a carry frame. DRY HEAT The unit produces a totally dry heat, with no condensation, no gas, no fumes or smell. SAFETY Includes tip-over switch for additional safety. CABLE Supplied with a power cable only.

SEE OFFER

Clarke Clarke DEVIL2800PTC-B 2.8kW Ceramic Fan Heater (230V) 65.97 GBP A great heater for workshops, factories and industrial units. Large variable heat output yet still compact, tough and robust. Featuring a composite aluminium & ceramic PTC (positive temperature coefficient) heater element. This means rapid heating of the element and self-regulating temperature where the heating power is controlled by the air flow and uniform heating with minimal power variation. With its minimal warm up time, the Devil 2800PTC-B ceramic heater is an easy and convenient way to quickly warm rooms. Variable heat output means a constant, comfortable room temperature can be easily maintained. Please Note – Only suitable for well insulated areas and not designed to be the primary heat source. - Fast efficient heating in workshops, garages etc - Operating voltage 230V~50Hz, 1 phase - Fan only mode & 2x heat settings - Variable heat output up to 2.8kW - Thermostat temperature control - Thermal cut out device for safety - Steel body

SEE OFFER

EH5001 Industrial Fan Heater 5kW 415V, 3ph - Sealey 148.96 GBP Sealey Industrial Fan Heater 5kW 415V, 3ph Features: Electric fan heater for industrial applications. Features two heat settings and adjustable thermostat control with fan only option. Auto cooling system to prevent unit from overheating during use. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Easily portable with carry frame. 17,000 Btu/hr (5kW) Heat output, heats an area of 48m³. Includes tip over switch for additional safety as well as front supports. Supply: 415V/3ph - 16A. Supplied with 3-phase power cable and 16A plug. Technical Details: • Electric fan heater for industrial applications. • Features two heat settings and adjustable thermostat control with a fan only option. • Auto cooling system to prevent unit from overheating during use. • A totally dry heat with no condensation, no gas, no fumes and no smell. • Ideal for workshops and garages, easily portable with carry frame. • Includes tip over switch for additional

SEE OFFER

Industrial Fan Heater 5kW 415V 3ph EH5001 - Sealey 145.6 GBP - Electric fan heaters for industrial applications. - Features two heat settings and adjustable thermostat control with fan only option. - Auto cooling system to prevent unit from overheating during use. - A totally dry heat with no condensation, no gas, no fumes and no smell. - Ideal for workshops and garages. - Supply: 415V/3ph - 16A. - 17,000 Btu/hr (5kW) Heat output. - Supplied with 3-phase power cable and 16A plug. - Size (W x D x H): 315 x 330 x 400mm.

SEE OFFER

Sealey EH3001 Industrial Fan Heater 3kW 2 Heat Settings 102 GBP Sealey 3kW Single-Phase Industrial Fan Heaters - Sealey EH3001, Electric fan heater for industrial applications. Two heat settings with thermostat control, plus fan only. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages.Supply: 230V - 16A. Supplied with power cable only and must be wired into a dedicated 16A supply, not suitable for use on a 13A domestic supply. Sealey EH3001 Industrial Fan Heater 3kW 2 Heat Settings

SEE OFFER

Sealey - Industrial Fan Heater 5kW DEH5001 183.4 GBP Electric fan heater with ducting for industrial applications. Two heat settings with thermostat control, plus fan only. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Adjustable louvre panels control the direction of air. Supplied with 6m duct hose, 3ph power cable and 16A plug. Electric fan heater with ducting for industrial applications. Two heat settings with thermostat control, plus fan only. Adjustable outlet louvre panels control the direction of air. Carry handle for portability. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Heating output: 2500/5000W. Supplied with 6m duct hose, 3ph power cable and 16A plug. IPX4 rated. Supply: 415V - 16A. Size (W x D x H): 400 x 240 x 360mm.

SEE OFFER

Commercial Drum Fan Heater, 3 Heat Settings, 2000W, Red - IG9302 - Igenix 39.99 GBP Sturdy and durable, the Igenix IG9302 2kW industrial fan heater is just the job for out-buildings and commercial use and is 4kg in weight. The heat resistant handle makes this robust heater easily portable and has a splash-proof outer casing. Simple in design but effective in safety and performance, the heater has over-heat protection and has a tip-over safety feature and rubber feet for extra stability. It has three heat settings using its stainless steel heating element.

SEE OFFER

Living and Home Electric Fan Compact Heater 46cm H X 25.5cm W X 34cm D 58.98 GBP Powerful Industrial Fan Space Heater-a fully adjustable thermostat, this industrial heating fan will heat your space without any problems. The electric fan heater with a powerful and durable stainless steel heating element heats the air faster than conventional heaters. Easy to transport-with high-quality durable metal casing and integrated handle, this fan can be moved in your space. Multi-stage adjustment and automatic temperature control, easy operation of the knob.Stable frame with carrying handle and non-slip feet. Ideal for use in home, garage, warehouse or workshop. Living and Home Power: 5 kW

SEE OFFER

Broughton Broughton FF3 3kW Electric Fan Heater (110V) 164.99 GBP An extra tough unit designed and built to withstand the rigours of regular site use. Features include an adjustable thermostat and over temperature protection as standard. The heater also includes a 200mm ducting colar allowing the user to fit up to 2m of ducting, as well as 1.8m lead with 32A 110V plug. Ducting available separately (order code: 010420132) 2 year warranty.

SEE OFFER

Clarke Clarke Contractor Devil 351C 2.4kW Ceramic Heater (110V) 208.79 GBP With its minimal warm up time, the Contractor Devil 351C ceramic heater is an easy and convenient way to quickly warm rooms for heating and drying. Variable heat output means a constant, comfortable room temperature can be easily maintained and this unit is completed with a tough tubular steel frame for added durability. This model also features an LCD panel to show heating mode, automatic shutdown timer, 6 programmed heating settings, remote control and open window detection function. Note: This product is only suitable for well insulated areas and is not designed to be the primary heat source.

SEE OFFER

Belfry Heating Katarina 2000W Electric Plinth Heater 10cm H X 50cm W X 26cm D 69.95 GBP This stainless steel plinth heater comes equipped with 3 heat settings that are hold, warm and cold. There is a 1kW heat setting If moderate heat is required, 2kW heat setting for maximum heat output and fan only air circulation for summer use. The convenient design allows the unit to be easily installed beneath a kitchen unit, providing you with a source of heat bursts when most needed. Belfry Heating

SEE OFFER

Sealey - Industrial Fan Heater 3kW 2 Heat Settings EH3001 113.12 GBP - INDUSTRIAL FAN HEATER � 10,000 Btu/hr (3kW) Heat output with 230V 16A supply. Heats an area of 60m�. - MULTIPLE SETTINGS � Two heat settings with thermostatic control and a fan only option which are ideal for use in a workshop or garage environment. - PORTABLE HEATER �The fan heater is easy to transport to different places as supplied with a carry frame. - DRY HEAT � The unit produces a totally dry heat, with no condensation, no gas, no fumes or smell. - SAFETY � Includes tip-over switch for additional safety. - CABLE � Supplied with a power cable only.

SEE OFFER

Sealey Industrial Fan Heater 9kW 415V 3ph 190.9 GBP Electric fan heater for industrial applications. Features two heat settings and adjustable thermostat control with fan only option. Auto cooling system to prevent unit from overheating during use. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Easily portable with carry frame. 31,000 Btu/hr (9kW) Heat output, heats an area of 80m³. Includes tip over switch for additional safety as well as front supports. Supply: 415V/3ph - 16A. Supplied with 3-phase power cable and 16A plug. Features & Benefits: • Electric fan heater for industrial applications. • Features two heat settings and adjustable thermostat control with a fan only option. • Auto cooling system to prevent unit from overheating during use. • A totally dry heat with no condensation, no gas, no fumes and no smell. • Ideal for workshops and garages, easily portable with carry frame. • Includes tip over switch for additional safety as well as front supports. • Supply: 415V/3ph - 16A. • 31,000 Btu/hr (9kW) Heat output. • Supplied with 3-phase power cable and 16A plug. • Size (W x D x H): 400 x 405 x 470mm. • Model No. EH9001 Specifications: Model No EH9001 Brand: Sealey Heated Area: 80m³ Nett Weight: 11.84kg Output: 31,000Btu/hr Power: 4500/9000W Supply: 415V/3ph-16A

SEE OFFER

Autojack PTC Portable Electric Fan Heater Space Warmer 2kW White One Size 32.98 GBP The Autojack EFH2KW electric fan heater is easy to use and runs of a standard 13 amp supply. The heater has 3 different heat output settings which are 25 watt, 1000 watt and 2000 watt. On the maximum setting the heat output is 6,820 BTUs per hour. When on the lowest setting of 25 watts it can be used as a conventional fan. Weighing only 1.7kg this heater is both lightweight and portable making it ideal for both home and office use. Voltage - 230V Power Output - 2KW Max Heat Output - 6,820 BTU/hr 3 Heat Setting - 25/1000/2000W Dimensions - 210 x 160 x 217mm Weight - 1.7kg

SEE OFFER

Samuel Alexander 2.5kw 11 Fin Black Electric Oil Filled Radiator / Heater Turbo & 24 Hour Timer Black One Size 81.74 GBP Heat Output 3 Heat setting Easily cleaned Carry Handles Simple controls Adjustable thermostat 11 Fins Voltage 230V-50Hz Cord and Plug Storage Castors for easy movement 24hr timer for pre-warmed room Turbo Fan gives extra heat boost

SEE OFFER

Clarke Clarke Devil 350C 2.4kW Ceramic Heater (230V) 203.98 GBP With its minimal warm up time, the Devil 350C ceramic heater is an easy and convenient way to quickly warm rooms for heating and drying. Variable heat output means a constant, comfortable room temperature can be easily maintained and this unit is completed with a tough tubular steel frame for added durability. This model also includes an LCD panel to show ambient temperature, 24-hour programmable timer, remote control and eco mode. Note: This product is only suitable for well insulated areas and is not designed to be the primary heat source.

SEE OFFER

Schallen 2KW Portable Electric Convector Radiator Heater with Timer & Turbo Fan - 3 Heat Settings, Adjustable Thermostat & Overheat Protection in BLACK Black One Size 42.94 GBP Our powerful convector heater produces 2000w of power and heat, which guarantees instant heat which will last, keeping you and your family warm during the cold winter months. Thanks to its convection technology, it heats up much faster than oil alternatives with low running costs. Fitted with an integrated 24-hour timer allowing you to pre-warm any room. The turbo fan is an ideal feature to have which gives an extra boost of heat. This heater features a handy manual thermostat dial, which informs you of the current temperature a manual and also allowing you to set the ideal room temperature. The heater will automatically cease heating once the preferred temperature is achieved. 3 HEAT SETTINGS 750W / 1250W / 2000W choose between low, medium and high heat outputs. Comes fitted with light indicators to easily display which settings are on/off. Our convector heater features a white simple, clean, slim, modern design, which makes it ideal for homes and offices. Fitted with portable handles allowing you to easily move the heater from room to room. Comes fitted with a handy overheat function and tip-over safety switch. Economical design UK British standard BS approved and conforms to BS EN60335-2 fully CE approved.

SEE OFFER

DeWalt Sealey Industrial Fan Heater 9kW 415V 3ph 190.9 GBP Electric fan heater for industrial applications. Features two heat settings and adjustable thermostat control with fan only option. Auto cooling system to prevent unit from overheating during use. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Easily portable with carry frame. 31,000 Btu/hr (9kW) Heat output, heats an area of 80m³. Includes tip over switch for additional safety as well as front supports. Supply: 415V/3ph - 16A. Supplied with 3-phase power cable and 16A plug. Features & Benefits: • Electric fan heater for industrial applications. • Features two heat settings and adjustable thermostat control with a fan only option. • Auto cooling system to prevent unit from overheating during use. • A totally dry heat with no condensation, no gas, no fumes and no smell. • Ideal for workshops and garages, easily portable with carry frame. • Includes tip over switch for additional safety as well as front supports. • Supply: 415V/3ph - 16A. • 31,000 Btu/hr (9kW) Heat output. • Supplied with 3-phase power cable and 16A plug. • Size (W x D x H): 400 x 405 x 470mm. • Model No. EH9001 Specifications: Model No EH9001 Brand: Sealey Heated Area: 80m³ Nett Weight: 11.84kg Output: 31,000Btu/hr Power: 4500/9000W Supply: 415V/3ph-16A

SEE OFFER

Sealey - Industrial Fan Heater 3kW DEH3001 145.6 GBP Electric fan heater with ducting for industrial applications. Two heat settings with thermostat control, plus fan only. A totally dry heat with no condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Adjustable louvre panels control the direction of air. Supplied with 6m duct hose and power cable. TEMPERATURE CONTROL - Two heat settings with thermostat control, plus fan only. ADJUSTABLE - Outlet louvre panels control the direction of air. MOISTURE FREE - A totally dry heat with no condensation, no gas, no fumes and no smell. INDUSTRIAL - Ideal for workshops and garages. POWERFUL - Heating output: 1500/3000W READY TO USE - Supplied with 6m duct hose and power cable. SUPPLY: 230V - 16A. DIMENSIONS - (W x D x H): 310 x 210 x 340mm.

SEE OFFER

Clarke Clarke CLS505 505mm 3kW Electric Circular Log Saw (230V) 568.79 GBP Utilising a swivel cradle operation for safe log cutting and sturdy steel construction with tough powder coated finish, the Clarke CLS505 505mm Swivel Log Saw is ideal for use at home or for DIY usage. The saw uses a powerful 3kW motor and is able to cut a maximum log diameter of 170mm with cutting length ranging from 250-1000mm. The CLS505 is designed for safe two handed operation, with a spring-loaded anti-kickback safety sawguard. For added stability and safety, the log saw can be bolted onto the floor using the 8mm holes provided (bolts sold separately) , alternatively there are 2 wheels which allow for easy transportation from different locations. Perfect for those who want to easily prepare their logs for the colder seasons. This product is supplied with a 505mm TCT saw blade, log carriage return spring, internal guard covers, log carriage with hinged hatch, fixing pack, carriage guards and log carriage extension. Our full range of Clarke Woodworker and Log Cutting products are supplied with a 12-Month Manufacturer's Warranty.

SEE OFFER

Living and Home 3.3KW Electric Fan Heater for Garage and Workshop in Black - Black - Size: One Size 71.76 GBP Here comes the perfect companion for your garage and workshop on cold winter days. The heater is excellent in delivering heat without keeping you waiting for a long time. The handle on the top allows you to carry the heater easily. Whats more, the heater is safe to use, with the cool-to-touch exterior and adjustable heat output. Living and Home 3.3KW Electric Fan Heater for Garage and Workshop in Black

SEE OFFER

Clarke Clarke Contractor Devil 371PD 2.4kW Quartz Halogen Infrared Heater (110V) 268.79 GBP Providing instant, clean, odour-free infrared heat, the Contractor Devil heater is ideal when spot heating of objects or persons is required. As the elements will only heat solid objects, rather than air, they are extremely efficient as 95% of input energy is converted into heat output. This Devil 371PD also features an LCD panel to show ambient temperature, a 24-hour programmable timer, remote control and eco mode. It also has a tilt switch to ensure automatic switch off if it tipped over for added safety. This product benefits further from 4 swivel wheels, making it easy to move around. Please note: This product is only suitable for well insulated areas and is not designed to be the primary heat source. Some images for illustrative purposes only, colour may vary.

SEE OFFER

Clarke Clarke Devil 6003 3kW Industrial Electric Fan Heater (230V)

Comparison of similar products