Review Arctic p12 pressure optimised 120mm chassis fan

Arctic P12 120mm Pressure Optimised PWM ARGB Case Fan, White - ACFAN00254A 14.95 GBP Boost your PC's cooling prowess with Arctic's P12 120mm Pressure Optimized PWM ARGB Case Fan in sleek white. Engineered for optimal airflow dynamics, it excels in tight spaces, while its customizable ARGB lighting adds a sophisticated touch. The ultimate fusion of performance and aesthetics for your high-tech setup

SEE OFFER

AWD-IT ARCTIC P12 - 120 mm Case Fan, Pressure-optimised, Computer, Fan Speed: 1800 RPM - Black, Black - ACFAN00118A 8.95 GBP During the development of the new P12, special emphasis was placed on a focused airstream and thus a high static pressure. The fan assures extremely efficient cooling, even with increased air resistance. Therefore, the P12 is particularly suitable for use on heatsinks and radiators.

SEE OFFER

Arctic P12 PWM PST A-RGB Semi-Passive 120mm Chassis Fan in Black 17.94 GBP Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum. Optimised for High Static Pressure The P12 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters. 200 to 2000 rpm Controlled via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance. High-Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWM PST A-RGB.

SEE OFFER

Arctic P12 PWM PST CO 120mm Chassis Fan for Continuous Operation in 10.94 GBP Optimised for Static Pressure During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST CO is particularly suitable for use on heatsinks and radiators. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Strong Cooling Performance Numerous improvements, such as updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB(A), the new P-fans left many competitors behind. More information can be found in our FAQ. More Efficient Technology The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM PST CO to run much more efficiently than its predecessors. This saves energy without compromising the performance. For Continuous Operation The premium quality of the dual ball bearing allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary sleeve or ball bearings. Therefore, the dual ball bearing is the perfect choice if you want to ensure continuous operation at maximum speed. Please note that ball bearings have a physically higher bearing noise compared to conventional sleeve bearings. Maximum Quietness, minimum Vibration Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years. 200 to 1800 rpm regulated via PWM With a wide range of regulation and the PWM Sharing Technology (PST), the P12 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

SEE OFFER

Arctic P12 Silent 120mm PC Case Cooling Fan - Black 9.95 GBP This fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Silent is particularly suitable for use on heatsinks and radiators.

SEE OFFER

Arctic P12 PWM PST A-RGB 120 mm A-RGB PWM Fan with Cable Splitter in 16.94 GBP Addressable RGB for Full Colour Control The P12 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum. Optimised for High Static Pressure The P12 PWM PST A-RGB operates with a focused airflow and high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is, therefore, suitable for use on heat sinks, radiators, and filters. 200 to 2000 rpm Controlled via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance. High-Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P12 PWM PST A-RGB.

SEE OFFER

Arctic P14 Pressure Optimised 140mm Case Fan, Black, Fluid Dynamic, 1700 RPM - ACFAN00123A 10.95 GBP The Arctic P14 Pressure Optimised 140mm Case Fan offers superior cooling with high-static pressure, optimal for dense radiators and heatsinks. Equipped with a fluid dynamic bearing, it operates at 1700 RPM, ensuring robust airflow and reduced acoustic footprint. Its precision-engineered blade design maximizes efficiency, while the sleek black finish enhances professional aesthetics.

SEE OFFER

Phanteks M25 Gen2 120mm High-Airflow DRGB PWM Triple Fan Pack - Black - PH-F120M25_G2_DBK01_3P 25.99 GBP Enhance cooling efficiency with Phanteks M25 Gen2 120mm High-Airflow DRGB PWM Triple Fan Pack. Featuring advanced PWM control, these fans deliver optimal airflow and pressure for superior thermal management. The elegant black design and customizable RGB lighting add a stylish touch to any setup, ensuring performance and aesthetics in one package.

SEE OFFER

Phanteks M25 Gen2 120mm High-Airflow PWM Triple Fan Pack - Black - PH-F120M25_G2_BBK01_3P 19.95 GBP Enhance your cooling system with the Phanteks M25 Gen2 120mm High-Airflow PWM Triple Fan Pack in black. Designed for optimal airflow and noise reduction, these fans feature a speed range of 500 to 1800 RPM. With an impressive static pressure rating, they ensure efficient heat dissipation, making them perfect for gaming PCs and high-performance builds.

SEE OFFER

Noctua NF-A12x15 PWM 120mm Chassis Fan 27.94 GBP Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A12x15 is a highly optimised, premium quality quiet fan in size 120x15mm. Its 15mm slim design makes the NF-A12x15 ideal for space-restricted applications such as low-profile CPU coolers or HTPC cases. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed during PWM control from 1850 to 1400rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands. 15mm slim design Having a thickness of only 15mm, the NF-A12x15 is much slimmer than standard 120x25mm fans. This makes it ideal for typical slim fan applications such as low-profile CPU coolers as well as for freeing up space by replacing standard 120x25mm fans on tower coolers, radiators or in PC cases. Metal-reinforced motor hub With many larger-diameter slim fan designs, the shorter axis and bearing lead to a reduced running stability and lifespan. The NF-A12x15 uses a metal-reinforced motor hub, a measure typically found in high-speed industrial fans, in order to guarantee Noctua’s signature stability and longevity. Flow Acceleration Channels The NF-A12x15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO Frame Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Integrated Anti-Vibration Pads Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. Custom-designed PWM IC with SCD Supporting fully automatic PWM speed control, the fan uses Noctua's custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus...

SEE OFFER

Corsair RS120 120mm PWM Triple Pack of Chassis Fans in Black 28.94 GBP The CORSAIR RS120 120mm PWM Fans Triple Pack gets your PC cooling setup off on the right foot with three efficient and reliable fans. Daisy-chained 4-pin PWM connectors let you link multiple fans together and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to be great for radiator use as well. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.

SEE OFFER

Noctua NF-A12x15 FLX 120mm Chassis Fan 26.94 GBP Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A12x15 is a highly optimised, premium quality quiet fan in size 120x15mm. Its 15mm slim design makes the NF-A12x15 ideal for space-restricted applications such as low-profile CPU coolers or HTPC cases. The FLX version provides 1850/1400/950rpm speed settings via the supplied Low-Noise Adaptors in order to allow full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands. 15mm slim design Having a thickness of only 15mm, the NF-A12x15 is much slimmer than standard 120x25mm fans. This makes it ideal for typical slim fan applications such as low-profile CPU coolers as well as for freeing up space by replacing standard 120x25mm fans on tower coolers, radiators or in PC cases. Metal-reinforced motor hub With many larger-diameter slim fan designs, the shorter axis and bearing lead to a reduced running stability and lifespan. The NF-A12x15 uses a metal-reinforced motor hub, a measure typically found in high-speed industrial fans, in order to guarantee Noctua’s signature stability and longevity. Flow Acceleration Channels The NF-A12x15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO Frame Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Integrated Anti-Vibration Pads Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. Smooth Commutation Drive 2 The latest version of Noctua's advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances. 3 speed settings for...

SEE OFFER

Noctua NF-A12x25 ULN 120mm Premium Chassis Fan 32.94 GBP The NF-A12x25 is a highly optimised next-generation 120mm fan that integrates Noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the AAO (Advanced Acoustic Optimisation) frame or Flow Acceleration Channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel Sterrox® liquid-crystal polymer (LCP) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of Noctua’s A-series, the NF-A12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 3-pin ULN version provides super-slow 1200/900rpm speed settings for ultra-low-noise applications and highly noise-sensitive users who demand near-silent acoustics. Topped off with exceptional running smoothness, Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.

SEE OFFER

Noctua NF-A12x25 PWM 120mm Premium Chassis Fan 32.94 GBP The NF-A12x25 is a highly optimised next-generation 120mm fan that integrates Noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the AAO (Advanced Acoustic Optimisation) frame or Flow Acceleration Channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel Sterrox® liquid-crystal polymer (LCP) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of Noctua’s A-series, the NF-A12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 4-pin PWM version supports fully automatic speed control via PWM fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.

SEE OFFER

Noctua NF-A12x15 PWM chromax.black.swap 120mm Chassis Fan in Black 30.94 GBP Having received dozens of awards and recommendations from international hardware websites and magazines, the NF-A12x15 has established itself as a default choice when it comes to premium-quality slim 120mm fans. The chromax.black.swap edition combines the NF-A12x15’s signature quiet cooling performance with an attractive all-black design and a bundle of self-adhesive red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. Topped off with Noctua’s trusted premium-grade SSO2 bearing, more than 150,000 hours MTTF and 6-year manufacturer’s warranty, the NF-12x15 PWM chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance.

SEE OFFER

Arctic P12 PWM PST ARGB Case Fan Triple Pack - White - ACFAN00258A 33.95 GBP The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

SEE OFFER

Be Quiet! Be Quiet Pure Wings 3 PWM 120mm Chassis Fan in White 19.94 GBP OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Pure Wings 3 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Pure Wings 3 120mm PWM provides the performance that is needed, even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.

SEE OFFER

Be Quiet! Be Quiet Pure Wings 3 PWM 120mm Chassis Fan in Black 17.94 GBP OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Pure Wings 3 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Pure Wings 3 120mm PWM provides the performance that is needed, even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.

SEE OFFER

be quiet! Silent Wings 4 Pro 120mm PWM Chassis Fan 32.94 GBP IMPROVED ON ALL LEVELS Altered blade arrangement for new generation performance The fan blades are what makes a fan. It is for this reason that the fan blades of Silent Wings Pro 4 120mm PWM have been developed newly from scratch. The new blade arrangement enables a performance second to none for all possible operations. Be it in a case, on radiators or heat sinks. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum distance for maximum air pressure Silent Wings Pro 4 120mm PWM makes for extraordinary air pressure and therefore, significantly increases the system’s performance. The decreased distance between the fan blades and the frame enables an extraordinarily high air pressure. By that, the Silent Wings Pro 4 120mm PWM allows the user to run even the most demanding applications. SPEED SWITCH 3 speed options for any possible application The speed switch makes switching between medium, high-speed and ultra-high-speed of maximum RPM levels quick and easy. The Silent Wings Pro 4 120mm PWM alters its application with a simple slide to the right. Medium-speed is suitable for any operation that requires regular cooling performance. High-speed lets the fan spin faster, providing more cooling power. Ultra-high-speed ultimately offers enough rpm to cool even the most demanding hardware in high-end PC builds. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 36.9dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. 3 DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings Pro 4 120mm PWM has 3 mounting options in the scope of delivery. The pre-installed radiator corners are specially designed for radiators on which the incomparable performance of this high-end fan completely shines. On the other hand, for chassis use, the anti-vibration mounting is the first choice as they reduce vibrations to a minimum. The plastic mountings round up the scope. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings Pro 4 120mm PWM. ELEGANT LOOK Magnificent appearance in all details The all-black design combined with a high-grade fan sticker makes Silent Wings Pro 4 120mm PWM a highlight in any system. The finely sleeved PWM cable perfectly rounds up the outer appearance of the fan. Not only does the PWM cable look great: its connector can also be plugged in and out with ease, making the fan an eye-catcher and user-friendly alike.

SEE OFFER

be quiet! Light Wings 120mm PWM Chassis Fan 26.94 GBP Light Wings 120mm PWM offers impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for a quiet case fan with an impressive look from every angle, Light Wings 120mm PWM is your fan of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Light Wings 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its seven airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure Light Wings 120mm PWM provides the performance that is needed, even in demanding configurations. VERY QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized impeller achieves the silent operation be quiet! is famous for. With a noise level of 20.6dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to very silent and powerful operation. All features combine to make Light Wings 120mm PWM the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.

SEE OFFER

be quiet! Silent Wings 4 120mm High-Speed PWM Chassis Fan 24.94 GBP NO COMPROMISE SILENCE AND PERFORMANCE Equally quiet and performant operation Silent Wings 4 120mm PWM high-speed is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 120mm PWM high-speed a fan that makes no compromises between very quiet operation and highest performance. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum tolerances for maximum air pressure Silent Wings 4 120mm PWM high-speed makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 120mm PWM high-speed allows the user to run even the most demanding applications. DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings 4 120mm PWM high-speed has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 31.2dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 120mm PWM high-speed. ELEGANT LOOK Magnificent appearance from all angles Be it as a radiator fan or in the case: Silent Wings 4 120mm PWM high-speed always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 120mm PWM high-speed a high performant and an incredibly good-looking fan.

SEE OFFER

be quiet! Light Wings Triple Pack of 120mm PWM Chassis Fans 53.94 GBP 3 Light Wings 120mm PWM offer impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for quiet case fans with an impressive look from every angle, these 3 Light Wings 120mm PWM are your fans of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. THREE FANS, ONE HUB Synchronize up to six Light Wings simultaneously An ARGB Hub allows to use and synchronize up to 6 ARGB components at the same time. A user-friendly installation makes for an easy and convenient process, while the elegant all-black design of the ARGB Hub visually suits any PC case. It can be mounted like an SSD or anywhere else using the double-coated adhesive tape supplied. PERFECT CASE FAN Fan blades optimized for high airflow With optimization for maximum airflow, Light Wings 120mm PWM is the right choice for any case configuration that demands high cooling performance. Its 7 airflow-optimized fan blades not only reduce noise-generating turbulences, but also ensure Light Wings 120mm PWM provides the performance that is needed, even in demanding configurations. VERY QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized fan frame and impeller achieve the silent operation be quiet! is famous for. With a noise level of just 20.6dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to very silent and very powerful operation. All features combine to make Light Wings 120mm PWM the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.

SEE OFFER

be quiet! Silent Wings 4 120mm PWM Chassis Fan 25.94 GBP NO COMPROMISE SILENCE AND PERFORMANCE Equally quiet and performant operation Silent Wings 4 120mm PWM is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 120mm PWM a fan that makes no compromises between virtually inaudible operation and high performance. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum tolerances for maximum air pressure Silent Wings 4 120mm PWM makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 120mm PWM allows the user to run even the most demanding applications. DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings 4 120mm PWM has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 18.9dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 120mm PWM. ELEGANT LOOK Magnificent appearance from all angles Be it as a radiator fan or in the case: Silent Wings 4 120mm PWM always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 120mm PWM a high performant and an incredibly good-looking fan.

SEE OFFER

Be Quiet! Be Quiet Pure Wings 3 PWM High Speed 120mm Chassis Fan in Black 14.94 GBP INNOVATIVE TECHNOLOGY Closed loop motor for persistent rpm Pure Wings 3 120mm PWM high-speed features a closed loop motor. This technology is comparable with the cruise control in cars. When working against resistance, for example a fan grill or radiator, fans spin slower as a result. The closed loop motor technology constantly monitors the current fan speed and increases it to the target rpm, if necessary. As a result, Pure Wings 3 120mm PWM high-speed always operates at the desired speed, no matter the air resistance. OPTIMIZED TO THE MAX For unprecedented air pressure in its class The fan frame outlet is newly designed to minimize air leaks. This benefits especially the radiator performance of Pure Wings 3 120mm PWM high-speed. To reach even higher performance, the fan blades are optimized as well: Their angle is adjusted to achieve even more air pressure, adding up to the extraordinary performance of Pure Wings 3 120mm PWM high-speed. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.41mm/H2O, Pure Wings 3 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The 9 airflow-optimized fan blades provide enough air pressure to make this fan work great even in demanding configurations. ICONIC DESIGN Streamlined look makes it an instant timeless classic Pure Wings 3 120mm PWM high-speed trims all the fat. Every part and single detail contribute to the functionality and uncompromising performance. This has also been considered in the design of the fan. All outlines and angles serve a purpose, making Pure Wings 3 120mm PWM high-speed a timeless classic and elegant addition to every gaming PC. RIFLE BEARING TECHNOLOGY Makes Pure Wings 3 a long-lasting companion Pure Wings 3 120mm PWM high-speed is built to last. With the proven rifle bearing technology, on average, this fan offers a lifespan of 80,000 hours.

SEE OFFER

be quiet! Light Wings Triple Pack of 120mm PWM High-Speed Chassis Fans 53.94 GBP 3 Light Wings 120mm PWM high-speed offer impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for quiet case fans with an impressive look from every angle, these three Light Wings 120mm PWM high-speed are your fans of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM high-speed offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. THREE FANS, ONE HUB Synchronize up to six Light Wings simultaneously An ARGB Hub allows to use and synchronize up to six ARGB components at the same time. A user-friendly installation makes for an easy and convenient process, while the elegant all-black design of the ARGB Hub visually suits any PC case. It can be mounted like an SSD or anywhere else using the double-coated adhesive tape supplied. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.6mm/H2O, Light Wings 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The nine airflow-optimized fan blades provide enough air pressure to make this fan perfect, even in demanding configurations. QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized fan frame and impeller achieve the silent operation be quiet! is famous for. With a noise level of just 31dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to silent and very powerful operation. All features combine to make Light Wings 120mm PWM high-speed the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.

SEE OFFER

be quiet! Light Wings 120mm PWM High-Speed Chassis Fan 31.94 GBP Light Wings 120mm PWM high-speed offers impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling. If you are looking for a high performance fan with an impressive look from every angle, Light Wings 120mm PWM high-speed is your fan of choice. IMPRESSIVE LIGHTING Lots of illumination possibilities Light Wings 120mm PWM high-speed offers ARGB lighting at the front and rear. The subtly lit ring at the back combined with the bright one at the front make for a magnificent appearance from every angle. 18 ARGB LEDs give you many opportunities to individualize your PC build. FOR RADIATORS AND HEATSINKS Fan blades optimized for high pressure With a remarkably high air pressure of up to 2.6mm/H2O, Light Wings 120mm PWM high-speed is the best choice for water-cooled and air-cooled systems alike. The 9 airflow-optimized fan blades provide enough air pressure to make this fan perfect, even in demanding configurations. QUIET OPERATION Acclaimed be quiet! low noise level A highly optimized impeller achieves the silent operation be quiet! is famous for. With a noise level of 31dB(A) at maximum fan speed, it proves that instead of being a replacement the lighting is an addon to silent and very powerful operation. All features combine to make Light Wings 120mm PWM high-speed the fan of choice for silent show cases and gaming systems alike. VARIABLE FAN SPEED FUNCTION Adjusts the fan speed and associated noise level Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary the speed and thus the noise level of the fan. With PWM the system can ramp up the cooling when it’s needed, or operate in maximum quiet mode when it’s not.

SEE OFFER

be quiet! Silent Wings 4 120mm Chassis Fan 23.94 GBP NO COMPROMISE SILENCE AND PERFORMANCE Equally quiet and performant operation Silent Wings 4 120mm is the fan of choice for all possible operations. Be it in a case, on radiators or heat sinks – Features like the silence-optimized fan blades and the funnel shaped fan frame make Silent Wings 4 120mm a fan that makes no compromises between virtually inaudible operation and high performance. OPTIMIZED FOR HIGH-END PERFORMANCE Minimum tolerances for maximum air pressure Silent Wings 4 120mm makes for extraordinary air pressure and, therefore, significant increases in the system’s performance. The decreased distance between the fan blades and the frame makes it possible. By that, the Silent Wings 4 120mm allows the user to run even the most demanding applications. DIFFERENT MOUNTING OPTIONS For any purpose Silent Wings 4 120mm has 2 mounting options in the scope of delivery. The pre-installed anti-vibration mounting reduces noise-generating vibrations to a minimum. For radiators and heat sinks, the plastic mounting is the first choice. Both solutions have in common that they enable virtually inaudible operation at regular speed. 6-POLE FAN MOTOR The key for virtually inaudible operation when needed 6-pole fan motor with 3 phases for very low power consumption, less vibration and therefore quiet max. operation of 18.9dB(A). Equipped with this state-of-the-art technology the fan is virtually inaudible when operated in mid-speed. FLUID-DYNAMIC BEARING For a sustainable operation The advanced fluid-dynamic bearing (FDB) enables a super long fan life of up to 300,000 hours. In addition, it reduces the vibrations significantly and supports the virtually inaudible operation of Silent Wings 4 120mm. ELEGANT LOOK Magnificent appearance from all angles Be it as a radiator fan or in the case: Silent Wings 4 120mm always makes a good impression. The all-black design combined with the high-grade fan sticker makes the fan shine in any system. This makes Silent Wings 4 120mm a high performant and an incredibly good-looking fan.

SEE OFFER

Corsair RS120 120mm PWM Chassis Fan in Black 13.94 GBP Add a CORSAIR RS120 120mm PWM Fan to your cooling setup – daisy-chained 4-pin PWM connectors let you link to your other RS fans and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to also serve as radiator fans. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.

SEE OFFER

Corsair RS120 120mm PWM Chassis Fan in White 13.94 GBP Add a CORSAIR RS120 120mm PWM Fan to your cooling setup – daisy-chained 4-pin PWM connectors let you link to your other RS fans and control them all through just a single 4-pin PWM header on your motherboard. Enjoy fan speeds up to 2,100 RPM, with the static pressure to also serve as radiator fans. CORSAIR AirGuide technology with anti-vortex vanes directs airflow for concentrated, powerful cooling. Magnetic Dome bearings ensure quieter operation and increased longevity, while Zero RPM mode offers silent operation at low loads.

SEE OFFER

Phanteks D30 Reverse Airflow 120mm DRGB PWM Fan - White 34.74 GBP Build the cleanest gaming PC with minimal cables using Phanteks D30 D-RGB fans. The Phanteks D30 fans provide exceptional performance, boasting a maximum airflow of 64.3CFM at a static air pressure of 3.01mmH2O. What’s more, D30 features an innovative daisy-chain design that lets you control up to four fans simultaneously with a single Y cable. Furthermore, the unique clip design used to daisy-chain multiple fans together, does not interfere with any mounting hardware, making these fans ideal for any build.

SEE OFFER

Cooler Master Mobius 120P ARGB White 3-Pack 120mm Chassis Fan Kit in 68.94 GBP PERFECTING ENGINEERING Cooler Master’s Mobius120P ARGB White Edition is a part of our highest performing series of fans. With an innovative ring blade design, the Mobius series optimizes for both performance and acoustics. Catering to a wide range of applications, cases, and cooling set ups, the Mobius 120P can suit the needs of any build. RING BLADE DESIGN (RBD) Interconnecting fan blades designed for a reinforced and rigid structure, eliminating vibration for stable and fluid fan operation. LOOP DYNAMIC BEARING New loop dynamic bearing design utilizes thick oil coating and lubrication to allow for stable performance. OIL REFLOW The oil flows back to the sealed bearing to create constant lubrication against friction and increases the life span of the fan. ANTI-SWAY SYSTEM Magnetic ring prevents bearing shaft from tilting, stabilizing the fan to prevent fan blade obstruction under various orientations, as well as oil spray. DUST PROOFING The sealed and concave position of the bearing prevents air and dust exposure and ensures a smooth transfer of motion. PRESSURE AIR ACCELERATION An angled inner frame rim with chamfered side vents boosts air intake, maximizes air flow, and eliminates dead spots. ARGB MOTHERBOARD COMPATIBILITY Addressable Gen 2 RGB syncs with Cooler Master’s MasterPlus+ software and dedicated controller, allowing customization of individual LED colors, effects, brightness and more – all from an intuitive, convenient interface. (controller sold separately) NEW MINI A1 ARGB CONTROLLER The brand new mini A1 controller is small, convenient, and easily allows you to daisy chain and connect up to three Mobius 120P fans. Compatible with our MasterPlus software, it allows full customization, all the way down to individual LED effects, brightness, and more.

SEE OFFER

Corsair RS MAX PWM Thick 120mm High Static Pressure Fan - Triple Pack - Black - CO-9050171-WW 79.95 GBP The CORSAIR RS120 MAX PWM Thick Fans Triple Pack maximizes your cooling with three 30mm-thick fans, allowing for a larger fan blade. The increased thickness results in a highstatic pressure of 4.2mm-H2O, ideal for pushing air through PC radiators. Precise speed control is achieved via PWM-controlled speeds reaching up to 2,000 RPM and delivering 72 CFM of airflow. Premium Liquid Crystal Polymer construction ensures higher durability, rigidity, and fan performance. With CORSAIR AirGuide Technology to concentrate airflow and a Magnetic Dome bearing for quiet operation and impressive longevity, the RS120 MAX is right at home in high-performance systems.;

SEE OFFER

Cooler Master SickleFlow Edge 120 ARGB White Edition 120mm Chassis Fan 17.94 GBP SAME LEGEND, MORE EDGE The SickleFlow Edge 120 ARGB features an enhanced fan blade, a newly redesigned frame, a novel bearing system, and an ARGB gen 2 mini controller for maximal performance and triple the power. Enhanced Fan Blade An improved fan blade provides higher fan speed, air pressure, and airflow while sticking to the same low noise level the SickleFlow is known for. REDESIGNED FAN FRAME The SickleFlow’s signature lines are now included in the frame design to provide a more cohesive product design. IMPROVED BEARING SYSTEM An enhanced loop dynamic bearing system keeps things running silently smooth.

SEE OFFER

DeepCool FL12R WH-3 IN 1 120mm ARGB PWM Triple Chassis Reverse Fan 65.94 GBP A LUMINOUS HALO FL12R WH integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level. REVERSE FAN BLADE Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy an uninterrupted RGB look on both intake and exhaust. UNCOMPROMISED PERFORMANCE Equipped with a long-life fluid dynamic bearing. The FL12R WH PWM fans boast exceptional cooling specs while remaining relatively quiet. DURABLE MATERIALS The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades. SECURE CONNECTION The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized.

SEE OFFER

Cooler Master SickleFlow Edge 120 ARGB 120mm Chassis Fan in Black 17.94 GBP SAME LEGEND, MORE EDGE The SickleFlow Edge 120 ARGB features an enhanced fan blade, a newly redesigned frame, a novel bearing system, and an ARGB gen 2 mini controller for maximal performance and triple the power. Enhanced Fan Blade An improved fan blade provides higher fan speed, air pressure, and airflow while sticking to the same low noise level the SickleFlow is known for. REDESIGNED FAN FRAME The SickleFlow’s signature lines are now included in the frame design to provide a more cohesive product design. IMPROVED BEARING SYSTEM An enhanced loop dynamic bearing system keeps things running silently smooth.

SEE OFFER

Cooler Master SickleFlow Edge 120 ARGB 3-in-1 120mm Chassis Fan Kit in 41.94 GBP SAME LEGEND, MORE EDGE The SickleFlow Edge 120 ARGB 3-Pack Fan Kit features an enhanced fan blade, a newly redesigned frame, a novel bearing system, and an ARGB gen 2 mini controller for maximal performance and triple the power. Enhanced Fan Blade An improved fan blade provides higher fan speed, air pressure, and airflow while sticking to the same low noise level the SickleFlow is known for. REDESIGNED FAN FRAME The SickleFlow’s signature lines are now included in the frame design to provide a more cohesive product design. IMPROVED BEARING SYSTEM An enhanced loop dynamic bearing system keeps things running silently smooth. A1 MINI LED CONTROLLER Control and customize your SickleFlow Edge 120 Fan Kit's lighting with a compact, easy-to-use mini controller.

SEE OFFER

Noctua NF-A12x25r PWM 120mm Chassis Fan 32.94 GBP The NF-A12x25r is a round-frame version of Noctua’s award-winning flagship model 120mm NF-A12x25 fan. Its round shape makes it ideal for use on low-height dual-tower CPU coolers like the NH-D12L as well as other space-restricted applications that cannot accommodate square-frame 120mm fans. Just like the square NF-A12x25, the round NF-A12x25r uses a record-tight tip clearance of only 0.5mm, which is made possible by using the novel Sterrox® liquid-crystal polymer (LCP) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Sharing the same state-of-the-art impeller design with Flow Acceleration Channels, the NF-A12x25r achieves the same class-leading quiet cooling performance as its square-frame sibling. It also supports fully automatic speed control via PWM fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, Noctua’s reference-class SSO2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the NF-A12x25r is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for all 120mm applications that require a round frame.

SEE OFFER

DeepCool FL12R-3 IN 1 120mm ARGB PWM Triple Chassis Reverse Fan Pack 67.94 GBP A LUMINOUS HALO FL12R integrates a total of 36 ARGB Gen2 LEDs, with the halo ring elevating its design aesthetics to a whole new level. REVERSE FAN BLADE Say goodbye to the "cross" on the other side - now you can use the fan as an intake fan and enjoy an uninterrupted RGB look on both intake and exhaust. UNCOMPROMISED PERFORMANCE Equipped with a long-life fluid dynamic bearing. The FL12R PWM fans boast exceptional cooling specs while remaining relatively quiet. DURABLE MATERIALS The entire structure and dynamic balance are further strengthened by using an enhanced composite material based on PBT for the frames and polycarbonate for the fan blades. SECURE CONNECTION The 8-pin connectors, integrated with PWM and ARGB SYNC, provide a more accessible and safer user installation experience. REDUCED VIBRATIONS Full-coverage rubber pads at each corner guarantee minimal fan vibration and ensure that noises resulting from uneven mounting pressure are minimized.

SEE OFFER

CiT Pro YH120 120mm ARGB Chassis Fan in White 17.94 GBP Introducing a new look to PC fans, the CiT Pro YH120 Infinity ARGB fans are CiTs new generation cooling fans. Combine excellent airflow, low noise operation and 8 superb ARGB LEDs. Finished off with a stunning infinity mirror LED effect in the centre of the fan offers stunning aesthetics and adds a real dynamism to your gaming PC. This stylish inner-ring fan is available in black or white and with a speed of 1200 RPM and airflow of 47.6 CFM the cooling performance is an impressive one. Daisy-chain multiple units via the ARGB fans male and female Aura connectors. Pair with compatible Motherboard software such as ASUS AURA Sync, MSI Mystic Light Sync, Gigabyte Fusion 2.0 and ASRock RGB LED and customise your LED lighting even further with a wide array of vivid effects and patterns. With excellent attributes, the YH120 fan frame and fan blades are crafted using industrial grade PBT to ensure strength and stability and incorporating hydraulic bearing, extended fan life to 30,000 MTBF. Made for those seeking high quality airflow, quiet operation and vivid lighting the YH120 fan brings out the best in your PC gaming system.

SEE OFFER

Arctic P12 Pressure Optimised 120mm Chassis Fan

Comparison of similar products